• 제목/요약/키워드: wetting resistance

검색결과 86건 처리시간 0.022초

플라이애시 혼합 콘크리트의 철근 부식 저항성능 평가 (Corrosion-Resisting Performance Evaluation of Concrete Mixed with Fly-Ash)

  • 박상순
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제21권1호
    • /
    • pp.117-125
    • /
    • 2017
  • 플라이애시가 시멘트의 대체재로 사용되면서 플라이애시는 콘크리트의 특성변화에 중요한 역할을 하고 있다. 본 연구에서는 보통 콘크리트와 플라이애시를 혼입한 콘크리트의 철근부식에 대한 저항성을 평가하였다. 부식속도가 가장 빠른 간만대 환경을 모사한 최적 건습반복시험방법을 찾고 해양환경폭로시험장의 간만대에 장기간 노출된 시편의 철근부식모니터링 시험결과와의 비교를 통해 FA 혼입에 따른 OPC 대비 부식 지연비를 도출하였다. 반전지전위법에 의한 부식 모니터링 결과 인공해수에 3일간 침지 후 4일간 건조의 반복 조건보다는 염수를 시편 상부에 침지시켜 염수 및 산소의 공급이 계속되는 염수 ponding 시험법이 부식을 촉진시키는 것으로 나타났다. 모든 시험법에서 OPC에 비해 FA의 철근 부식이 지연되었다. FA의 철근부식 지연비율은 재령이 증가할수록 증가하였으며 OPC 대비 최대 27%까지 철근부식이 지연되었다. 그 결과 플라이애시 콘크리트는 재령이 증가할수록 철근부식 저항성능이 향상됨을 알 수 있었다.

프로그래밍 노이즈 필터링 방법에 의한 저항 방식 E-밴드 텍스타일 스트레인 센서 신호해석 (Resistive E-band Textile Strain Sensor Signal Processing and Analysis Using Programming Noise Filtering Methods)

  • 김승전;김상운;김주용
    • 감성과학
    • /
    • 제25권1호
    • /
    • pp.67-78
    • /
    • 2022
  • ICT 산업의 글로벌 시장을 선점할 수 있는 다음 세대의 개발이 필요한 상황이 일어남에 따라 웨어러블 디바이스의 생체 신호 모니터링에 대한 관심이 크게 증가하고 있다. 이에 따라 본 연구에서는 히스테리시스가 적은 E-Band를 사용하여 단일벽 탄소나노튜브(SWCNT) 분산 용액에 함침 공정을 통해서 저항형 직물 인장 센서(Resistive textile strain sensor)를 개발하였다. 전기전도성이 부여된 e-band에 저항 신호를 측정하기 위해 만능재료시험기(UTM)과 Microcontroller unit인 아두이노와 LCR 미터를 이용해서 인장의 변화에 따른 저항 변화를 측정하였다. 원단으로 이루어진 텍스타일 스트레인 센서의 특성상 발생하는 다양한 노이즈들을 효과적으로 처리하기 위하여 신호처리 과정(Signal processing)의 노이즈 필터링의 이동평균 필터, 사비츠키-골레이 필터, 중앙값 필터들을 사용하여 센서의 필터 성능을 평가하였다. 그 결과 이동평균 필터의 필터링 결과의 신뢰도가 최소 89.82%, 최대 97.87%으로 이동평균 필터링이 텍스타일 스트레인 센서의 노이즈 필터링 방식으로 적합하였다.

폴리아미드계 수지를 이용한 핫멜트 접착제의 기능향상 - (II) 테르펜수지의 영향 - (Functional Improvement of Hot Melt Adhesive Using Polyamide Type Resin - (II) The Effects of Terpene Resin -)

  • 정경호;홍영근;전영식
    • 공업화학
    • /
    • 제9권2호
    • /
    • pp.226-231
    • /
    • 1998
  • 핫멜트 접착제는 최근 대두되고 있는 환경적인 요구사항들을 충족시킬 수 있는 무용제형이고 접착공정의 자동화가 가능하기 때문에 널리 사용되고 있다. 본 연구에서는 핫멜트 접착제의 기본 수지로서 폴리아미드 단일중합체 대신 나일론 6, 나일론 66, 나일론 12로 이루어진 CM831(랜덤중합체)과 843P(블록중합체) 형의 두 종류 수지를 사용하여 핫멜트 접착제를 제조하였다. 결과에 의하면 접착제 자체 강인성을 크게 손상하지 않는 범위에서 가능한 한 낮은 용융점도를 갖는 조건은 CM831/843P 수지 블랜딩 비율이 약 75/25~50/50임을 알 수 있었다. 접착성 향상과 더불어 피착제와의 젖음 특성 향상을 위해 점착부여 수지로 테르펜 수지를 사용하였다. 테르펜 수지는 약 10 wt.% 첨가되었을때 현 시스템의 용융온도와 용융점도를 감소시키고, 접착제 자체 강인성은 증가시키는 접착제 측면에서 바람직한 결과를 나타냈다. 또한 접착제의 유변학적 특성도 전형적인 비뉴턴 거동으로부터 테르펜수지 첨가로 인해 뉴턴 거동에 가까워졌다.

  • PDF

Utilizing chromosome segment substitution lines (CSSLs) to evaluate developmental plasticity of root systems in hardpan penetration and deep rooting triggered by soil moisture fluctuations in rice

  • Nguyen, Thi Ngoc Dinh;Suralta, Roel R.;Mana, Kano-Nakata;Mitsuya, Shiro;Stella, Owusu Nketia;Kabuki, Takuya;Yamauchi, Akira
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.321-321
    • /
    • 2017
  • Water availability in rainfed lowlands (RFL) is strongly affected by climate change. In RFL, rice plants are exposed to soil moisture fluctuations (SMF) but rarely to simple progressive drought as widely believed. Typical RFL field is characterized by a about 5-cm thick high bulk density hardpan layer underneath the cultivated layer at about 20 cm depth that impedes deep root development. Root system has the ability to develop in response to changes in SMF, known as phenotypic plasticity. We hypothesized that genotypes that can adapt to RFL have root plasticity. The roots can sharply respond to re-wetting after drought period and thus penetrate the hardpan layer when the hardpan is wet and so becomes relatively soft, and thus access water under the hardpan. This study aimed to identify CSSLs derived from a cross between Sasanishiki and Habataki which adapted to such RFL conditions. We used 39 CSSLs together with the parent Sasanishiki, which were grown in hydroponics and pot under transient soil moisture stresses (drought and then rewatering), and compared with continuously well-watered (WW) (control) up to 14 days after sowing (DAS), and 20 DAS, respectively. Based on the results of hydroponics and pot experiments, we selected a few lines, which were grown in the soil-filled rootbox with artificial hardpan layer and without artificial hardpan. For the rootbox without artificial hardpan, plants were grown under WW and transient soil moisture stresses for 49 DAS. While the rootbox with artificial hardpan, the plants were grown under WW (control) and SMF (WW up to 21 DAS, 1st drought (22-36 DAS), rewatering (37-44 DAS), and followed by 2nd drought (45-58 DAS)). Among the 39 CSSLs, only CSSL439 (SL39) consistently showed significantly higher shoot dry weight (SDW) than Sasanishiki under transient soil moisture stress conditions as well as SMF conditions in all the experiments. Furthermore, under WW, SL39 consistently showed no significant differences from Sasanishiki in shoot and root growth in most of traits examined. SL39 showed significantly greater total root length (TRL) than Sasanishiki under transient soil moisture stress, which is considered as phenotypic plasticity in response to rewatering after drought period. Such plastic root development was the key trait that effectively contributed to root elongation and branching during the rewatering period and consequently enhanced the root to penetrate hardpan layer when the soil penetration resistance at hardpan layer reduced. In addition, using the rootbox with artificial hardpan layer ($1.7g\;cm^{-3}$, heavily compacted), SL39 showed greater root system development than Sasanishiki under SMF, which was expressed in its significantly higher TRL, total nodal RL, and total lateral RL at hardpan layer as well as at below the hardpan layer. These results prove that SL39 has plasticity that enables its root systems to penetrate hardpan layer in response to rewatering. Under SMF, such root plasticity contributed to its higher gs and Pn.

  • PDF

해양 환경 폭로 시험을 통한 FA 콘크리트의 겉보기 염화물 확산계수 평가 (Evaluation of Apparent Chloride Diffusion Coefficient of Fly Ash Concrete by Marine Environment Exposure Tests)

  • 윤용식;임희섭;권성준
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제23권3호
    • /
    • pp.119-126
    • /
    • 2019
  • 해안 지역에 시공된 철근 콘크리트 구조물은 해수 중의 염소 이온에 의해 내부 철근이 부식하게 된다. 특히 해안지역에서는 해수에 침지되는 경우뿐만 아니라 조수간만 및 비래염분의 영향을 받기 때문에 이에 대한 고려가 필수적이다. 본 연구에서는 3가지 수준의 노출 환경(침지대, 간만대, 비말대)과 노출기간 180일, 365일, 730일을 고려하여 해양환경노출실험을 실시하였다. 대상 배합은 3가지 수준의 물-결합재비 및 2가지 수준의 플라이애시 치환률(0 %, 30 %)을 고려하여 설정하였다. 모든 노출조건에서 플라이 애시 치환 배합이 OPC 배합 대비 낮은 겉보기 염화물 확산계수를 나타내었으며, 이는 플라이애시의 포졸란 반응이 원인으로 사료된다. 플라이애시 배합은 노출 기간 180일에서는 플라이애시 치환 배합이 OPC 배합 대비 최대 63 5 %의 감소율을, 노출 기간 730일 에서는 최대 55.8 %의 감소율을 나타내었다. 노출 조건에 따른 확산계수 거동을 평가한 결과, 플라이애시 치환 배합에서는 간만대, 침지대, 비말대 순으로 확산계수가 평가되었다. 간만대에서는 건습이 반복되어 염화물 이온의 침투가 빠르게 일어나는 것으로 보인다.

지진이후 강우의 산사태 발생 영향성 평가를 위한 토양물성값 변화 분석 (Evaluating the Influence of Post-Earthquake Rainfall on Landslide Susceptibility through Soil Physical Properties Changes)

  • 서준표;유송;이기환;이기하;오세욱
    • 한국재난정보학회 논문집
    • /
    • 제20권2호
    • /
    • pp.270-283
    • /
    • 2024
  • 연구목적: 국내에서 지속적으로 지진이 발생하고 있기 때문에 지진 발생 후에 대한 산사태 유발 임계강우량의 하향 조정이 요구되고 있다. 본 연구에서는 토양의 물리적 실험을 통해 지진 발생 이후 산사태 예·경보를 위한 임계강우량 조정의 과학적 근거 확보 및 기초자료를 제공할 목적으로 수행되었다. 연구방법: 절토 사면에서 채취한 교란 및 비교란 시료를 대상으로 직접전단시험을 통한 토양의 전단강도 변화를 분석하고, 건조 및 습윤 조건으로 재성형된 시료의 수침후 포화도에 따른 토양의 강도정수를 분석하였다. 연구결과: 다짐함수비를 변화시키며 직접전단시험을 수행한 결과 교란시료 함수비 및 포화도가 증가할수록 점착력은 50% 이상 감소하였고, 전단저항각은 1~2° 감소하였다. 또한, 링전단시험 중 물을 공급한 결과 전단면에 물이 침투되는 순간부터 전단강도의 값이 서서히 감소되는 것으로 나타났으며, 최대전단강도는 약 65~75%, 잔류전단강도는 약 53~60% 감소하였다. 결론:지진과 이후 강우가 발생하였을 때는 사면붕괴 가능성이 증가하므로 이에 대한 대책이 필요하며, 본 연구의 결과는 지진이 발생한 지역에서 산사태를 유발하는 강우임계값을 하향해야 하는 과학적 근거 및 기초자료로 활용될 수 있을 것으로 기대된다.