Recently, international attention has been focused on the development of non-traditional energy resources such as shale gas and oil sands, due to the steep increase in the demand for natural resources. The materials incorporated in an oil gas plant module experience extreme environments, and are prone to various problem such as fracture, corrosion and abrasion due to low-temperature brittleness. In order to improve the plant life, it is necessary to perform characteristics study and performance evaluation of the materials. In particular, this paper explains the main set of materials which are most frequently used in oil sands plant project. In order to investigate wear characteristics, the authors carried out abrasive wear tests of TP 316, stainless steel and SS 400, structural rolled steel. For the analysis of the abrasive wear resistance of an oil sands plant, the authors carried out the test according to ASTM G 105 "Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Test" standard guidelines. The authors have derived the results from the data associated with the loss of mass with respect to wear rate. During the test, for a given wear length for 10,000 revolutions, the rotational speed and applied force of the rubber wheel were varied.
Mun, Mu Kyeom;Lee, Won Oh;Park, Jin Woo;Kim, Doo San;Yeom, Geun Young;Kim, Dong Woo
Applied Science and Convergence Technology
/
v.26
no.6
/
pp.164-173
/
2017
Across the most industry, the demand for nanoparticles is increasing. Therefore, many studies have been carried out to synthesize nanoparticles using various methods. The aim of this paper is to introduce an industry-applicable as well as financially and environmentally effective solution plasma process. The solution plasma process involves fewer chemicals than the traditional kit, and can be used to replace many of the chemical agents employed in previous synthesis of nanoparticles into plasma. In this study, this process is compared to the wet-reaction process that has thus far been widely used in the most industry. Furthermore, the solution plasma process has been classified into four different types (in-solution, out of solution, direct type, and remote type), according to its plasma occurrence position and plasma types. Thus, the source of radicals, nanoparticle synthesis, and modification methods are explained for each design. Lastly, unlike nanoparticles with hydrophilic functional groups that are made inside the solution, a nanoparticle synthesis and modification method to create a hydrophobic functional group is also proposed.
KIM, Seonghun;KIM, Pyungkwan;JEONG, Seongjae;BAE, Jaehyun;LIM, Jihyun;OH, Wooseok
Journal of the Korean Society of Fisheries and Ocean Technology
/
v.54
no.2
/
pp.97-106
/
2018
The objective of this study was to estimate physical properties and fishing performances of net twine with improved PBS copolymer resin (Bio-new), the existing PBS/PBAT blending resin (Bio-old) and commercial Nylon (Nylon). The tensile strength of Bio-new monofilament was equal to Bio-old and the elongation of Bio-new was about 6 % higher than that of Bio-old in wet condition. The physical properties tests were carried out to estimate breaking load and stiffness in dry and wet conditions, respectively. In the results, the breaking load of Nylon netting was the highest whereas the elongation of Bio-new was 1.4 times higher than that of Nylon netting in wet condition. The breaking load of Bio-old netting was about 9.2 % higher than that of Bio-new netting. However, the elongation of the Bio-new netting was about 3% higher than that of Bio-old. The stiffness of the Bio-new compared to Bio-old was improved about 34 % in dry condition and about 32 % in wet condition. The filed experiments of the fishing performance were conducted with three kinds of drift nets with different netting materials in the coastal sea of Jeju. The each experimental drift net made of different materials showed the similar fishing performance. Bio-old drift net yielded less catches of small sized yellow croaker than other drift nets. The netting materials affected the fishing performance and length distribution of catches in the drift nets.
Journal of The Korean Society of Grassland and Forage Science
/
v.11
no.3
/
pp.189-194
/
1991
This experiment was carried out to investigate the effect of pure mineral nitrogen fertilization on dry matter yield and to determine the amounts of advisable mineral nitrogen according to difference of annual precipitations in permanent grassland. The results obtained were as follows: 1. Only PK-fertilizing without additional mineral nitrogen application produced 6. 9 tonlha of annual dry matter yields on average in relatively wet years that was higher than in rel. dry and normal years under 3-cut system by 0. 7 and 0.6 ton DMIha, respectively. 2. Due to the lesser rainfall the nitrogen-efficiency was substantially higher with heavy dressing of nitrogen fertilizer. The absolute differences in yield between rel. dry and wet years were 0.4 and 0.7 ton DMIhalyear respectively when dressed with 90 and 120 kgN/ha/cut at 4-, 5- and 6-cut systems, whereas at 3-cut system differences around 1.3 and 1.1 ton Dhllhalyear respectively were recorded. 3. In rel. dry years the most efficient N-dressing rates per ha and year tended to be slightly higher than in rel. wet and normal years. Particularly at 5-cut system 4-7 kg/ha/cut of more nitrogen fertilization was required in order to obtain the highest overyields. 4. The N-dressing rates needed to maintain a nitrogen-efficiency of 8 to 16 kg DM/kg N tended to be stronger particularly at high cut system, and also in rel. dry years higher dressing rates were required that in rel. wet and normal years.
Kim, Ji-Han;Kim, Tae-Kyung;Shin, Dong-Min;Kim, Hyun-Wook;Kim, Young-Boong;Choi, Yun-Sang
Asian-Australasian Journal of Animal Sciences
/
v.33
no.3
/
pp.501-505
/
2020
Objective: The purpose of this study was to investigate the effects of aging methods (AM) i.e. dry-aging (DA) and wet-aging (WA) on the physicochemical properties and in vitro digestibility of proteins in beef short loin. Methods: Short loins (M. longissmus lumborum), were trimmed and boned-out on the fifth day postmortem, from a total of 18 Hanwoo, which were purchased from a commercial slaughterhouse. Short loins were separated randomly grouped into one of the three treatments: control, WA (1℃, 7 days), and DA (1℃, 0.5 m/s, 85% relative humidity [RH], 30 days). Results: Dry-aged beef (DAB) exhibited higher pH, water holding capacity (WHC), myofibrillar fragmentation index (MFI), and digestibility, however lower lightness, redness, and yellowness values, cooking loss, and shear force (SF), than those of wet-aged beef (WAB) (p<0.05). The myosin light chain band intensity of DAB was higher than that of control and WAB in sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The in vitro digestibility of aged beef was highly (p<0.001) correlated to physicochemical properties except WHC. The correlation coefficient between AMs and WHC was higher than that between AM and SF (p<0.05) or MFI (p<0.001). A high correlation was observed between SF and MFI (p<0.001). Conclusion: Thus, we believe that DAB is more advantageous than WAB owing to its high digestibility and WHC and low SF.
Studies on the distribution and growth of the mud mussel, Musculista senhousia, were carried out in the mud-tidal flat near Mokpo from August 1996 to July 1997. The patch distribution of the mussel was observed in the middle part of the tidalflat during the study period. Annual mean density was 8,215${\pm}$1,394 ind./m2 and annual mean biomass was 1,966.43${\pm}$668.49 g TWwt/m2 in total wet weight, 760.04${\pm}$279.13 gMWwt/m2 in meat wet weight, 209.93 ${\pm}$ 49.41 gMDwt/m2 in meat dry weight, and 109.66${\pm}$58.78 gAFDW/m2 in ash-free dry weight. The monthly mean size of shell length varied from 11.00 mm to 16.97 mm. Relationship between shell length (SL) and shell height (SH) showed a positively significant regression (SH=0.482SL+0.791, R2=0.940, P<0.001). Regressions of total wet weight (TWwt) (TWwt=7.601${\times}$10-5SL3.052, R2=0.905, P<0.001), and meat wet weight (MWwt) (MWwt=1.127${\times}$10-5${\times}$SL3.404, R2=0.784, P<0.001) on shell length were positively allometric, with highly significant correlation coefficient. The relationships between SL and meat dry weight (MDwt), and AFDW were MDwt=9.813${\times}$10-6${\times}$SL2.928 (R2=0.421), and AFDW=1.015${\times}$10-5${\times}$SL2.922(R2=0.810), respectively. The condition factor of the mussel has been increased from March and formed a peak in July and August. It was sharply dropped in September. These results suggest that the gonadal development of the species commenced to be occurred in spring and that main spawning occurred between August and September.
Two experiments were carried out to evaluate the effects of cellulase and brewers' grains addition on improvement of the fermentation quality and the nutritive value of barley straw silages made from dried or fresh straw. In Exp. I : 1 kg dried barley straw + 2 kg wet brewers' grains + 0 (I-0), 2 (I-2), 4 (I-4), 6 (I-6), and 8 (I-8) g of cellulase. In Exp. II : 2 kg fresh barley straw + 2 kg wet brewers' grains + 0 (II-0), 2 (II-2), 4 (II-4), 6 (II-6), and 8 (II-8) g of cellulase. Each prepared material was ensiled into vinyl bag silos (5 L capacity) and stored for 10 (Exp. I) or 7 (Exp. II) months at $21^{\circ}C$. The fermentation quality and nutritive value of barley straw silages produced were markedly improved by mixing them with wet brewers' grains, on the other hand the effect of cellulase addition on the fermentation and reduction of the cell wall components in the silos at ensiling more effectively occurred at low dry matter silages rather than at the high ones. All silages in both Exp. I and II were found well preserved as indicated by their low pH and high lactic acid concentration. Cellulase treated silages had a lower pH (p<0.05) and a higher lactic acid concentration (p<0.05) than those of without cellulase addition. NDF, ADF, and (Hemi)cellulose contents of cellulase treated silages reduced (p<0.05) compare to those of the corresponding silage without cellulase. Increasing levels of cellulase addition caused an increase in fermentation quality and reduction of cell wall components. In vitro dry mater digestibility was found similar in all silages. Fermentation quality and nutritive value of barley straw silages were improved by both wet brewers' grains and cellulase addition. Cellulase addition reduced the cell wall components silages, but did not improve the digestibility.
Journal of the Korean Society of Environmental Restoration Technology
/
v.18
no.3
/
pp.13-22
/
2015
Unpaved forest roads are common accessways in mountain areas being used for forestry purposes. The presence of forest roads produces large volumes of surface runoff and sediment yield due to changes in soil properties and hillslope profile. Rainfall simulation experiments were conducted to estimate the impacts of above-ground vegetation and antecedent soil water condition on hydrology and sediment processes. A total of 9 small plots($1m{\times}0.5m$) were installed to represent different road surface conditions: no-vegetation(3 plots), vegetated surface(3 plots), and cleared vegetation surface(3 plots). Experiments were carried out on dry, wet, and very wet soil moisture conditions for each plot. Above ground parts of vegetation on road surface influenced significantly on surface runoff. Runoff from no-vegetation roads(39.24L) was greater than that from vegetated(25.05L), while cleared-vegetation condition is similar to no-vegetation roads(39.72L). Runoff rate responded in a similar way to runoff volume. Soil erosion was also controlled by land cover, but the magnitude is little than that of surface runoff. Even though slight differences among antecedent soil moisture conditions were found on both runoff and soil erosion, runoff rate and soil losses were increased in very wet condition, followed by wet condition. The experiments suggest that vegetation cover on forest road surface seems most effective way to reduce surface runoff and soil erosion during storm periods.
Lee, Yong Kyu;Kim, Sun-Goo;Won, Jong Myoung;Kim, Young-Hun
Journal of Korea Technical Association of The Pulp and Paper Industry
/
v.47
no.5
/
pp.134-140
/
2015
This study was carried out to evaluate whether EVAc, acryl latex and biobinder could substitute the part of SB latex for pre-coating color formula or not. Different coating colors prepared through the substitution of 30% SB latex with EVAc, acryl latex, and biobinder were applied for pre-coating layer. 100% SB latex is used as a binder for top coating color. The optical properties, gloss, roughness, stiffness, dry- and wet-pick strength were measured. There were no significant differences in the brightness, whiteness, opacity, roughness, ink set-off and gloss of paper coated with 5 different coating colors. However the stiffness, dry- and wet-pick strength were somewhat lower than those of conventional coating color which 100% SB latex was used as a binder. Although the part of SB latex could be substituted with EVAc, acryl latex and biobinder without sacrificing the qualities of coated paper. Further researches on the improvement of stiffness, dry- and wet-pick strength, and the optimization of rheology of coating color in order to improve the qualities of coated paper are strongly recommended.
This study was carried out to investigate the block shear strength of the 2ply laminated wood composed of Pinus thunbergii with ureaformaldehyde resin as adhesives according to pressure (6, 9, 12, 15kg/$cm^2$), pressing time(5, 10, 20, 30 hrs.), amount of spread(54, 108, 217, 324g/$cm^2$), hardener(10, 20, 30, 40% of 10% $NH_4CL$ on resin) and extender(0, 5, 10, 15% wheat flour on resin), and the bending strength and bending young's modulus of laminated beam according to the number of ply. The results were summarized as follows; 1. According to pressing pressure with amount of spread 217g/$cm^2$ both dry and wet shear strength of laminated wood showed the highest in 15kg/$cm^2$, and hot-cold soaking treatment showed the highest in 9kg/$cm^2$, while all shear strength of dry, wet and hot-cold soaked laminated wood have been reduced with the increasing of pressing time. 2. According to amount of spread, adhesion strength with the dry, wet and hot-cold soaking treatments revealed the highest in 217g/$cm^2$ and have been reduced under or over 217g/$cm^2$ of spread. 3. According to addition of hardener and extender, all shear strength of laminated block with the dry, wet and hot-cold soaking treatments have been reduced in increasing of addition amount of hardener and extender. The bending strength of beam according to the number of ply showed the highest in 2ply laminated wood and horizontal loading beam to glue line had the higher in strength than the vertical loading.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.