• 한국염색가공학회지
• /
• 제32권1호
• /
• pp.57-64
• /
• 2020

In this study, alginate-gelatin/silk wet-laid nonwoven fabrics were prepared by using alginate gelatin fiber and silk fiber, as the main fiber, and PVA fiber as binder fiber. The characterization of pore size and mechanical property was carried out on the various weight ratios of alginate gelatin fiber and silk fibers, or the adding binder fibers. As the content of silk or binder fiber increases, the tensile strength increases from 0.70 kgf/㎠ to 5.08 kgf/㎠ and the pore size decreases 111.6 ㎛ to 51.00 ㎛. As the weight of the silk increased, the density increased, and binder fiber was added to enhance the cohesion between fibers, thereby increasing the wet-laid nonwoven fabric strength. We studied on wet-laid nonwoven fabrics that can be applied to mask sheet with adjustable pore size.

• 한국염색가공학회지
• /
• 제27권4호
• /
• pp.327-333
• /
• 2015

This paper aims to manufacture nonwoven fabrics by wet-laid technology using Vectran$^{(R)}$ one of the highly favoured high-performace fiber. In previous study, a novel evaluation on fiber dispersion was studied to select optimum surfactant by the need for the control of fiber dispersion in water with reference to wet-laid nonwoven technology. 3 Types of sulfonate anionic surfactants were chosen and added in a stage of agitation to improve dispersion behavior of fibers in water. It was observed that the state of fiber dispersion in water affected various properties of nonwovens, including appearance, physical properties, and mechanical properties. Nonwoven added SDBS was uniform in web structure, thickness and weight. Its average pore was small in size and consisted of fine pores and the value of porosity was high. Further, the difference of tensile value between 2 directions was the least. Consequentially, as the dispersion behavior of fiber increases, nonwoven shows more balanced and uniform physical properties in all directions.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.302-308
• /
• 2021

Air filters are being used in countless places from industrial sites to everyday life. The spread of the COVID-19 virus, which started in 2019, is disrupting people's daily lives, and the importance of air filters as a basic means to prevent the spread of these diseases is further highlighted. In this study, the purpose was to develop another type of air filter media with excellent barrier properties that can replace PP meltblown nonwoven fabrics widely used commercially due to its excellent electrostatic properties, differential pressure and filtration efficiency. Therefore, wet-laid nonwoven for air filters were manufactured using plexi-filaments formed through flash spinning and having various fiber diameter from hundreds of nanometers to tens of micrometers, and its applicability as an air-filter media was investigated compared to the meltblown nonwoven. As a result of the performance evaluation, it was found that the filtration efficiency and barrier performance at 0.3㎛ was superior to that of the meltblown nonwoven of the same weight, although the differential pressure was high due to morphological properties of the plexi-filament.

• 섬유기술과 산업
• /
• 제12권2호
• /
• pp.88-95
• /
• 2008

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.308-311
• /
• 2012

A wide range of possible hazards existing in thermal batteries are mainly caused by thermal runaway, which results in overheating or explosion in extreme case. Battery separators ensure the separation between two electrodes and the retention of ion-conductive electrolytes. Thermal runaways in thermal batteries can be significantly reduced by the adoption of these separators. The high operating temperature and the violent reactivity in thermal batteries, however, have limited the introduction of conventional separators. As a substitute for separators, MgO powders have been mostly used as a binder to hold molten salt electrolyte. During recent decades the fabrication technology of ceramic fiber, which has excellent mechanical strength and chemical stability, has undergone significant improvement. In this study we adopted wet-laid nonwoven paper making method instead of the electrospinning method which is costly and troublesome to produce in volume. Polymeric precursor can readily be coated on the surface of wet-laid ceramic paper, and be formed into ceramic film after heat treatment. The mechanical strength and the thermo-chemical stability as well as the wetting behaviors of ceramic separators with various molten salts were investigated to be applicable to thermal batteries. Due to their excellent chemical, mechanical, and electrical properties, wet-laid nonwoven separators made from ceramic fibers have revealed positive possibility as new separators for thermal batteries which operate at high temperature with no conspicuous sign of a short circuit and corrosion.

• 한국염색가공학회지
• /
• 제26권4호
• /
• pp.339-346
• /
• 2014

To give a positive effect on dispersion behavior of high performance fibers $Vectran^{(R)}$ in water with reference to wet-laid nonwoven technology, 9 kinds of sulfonate type anionic surfactants were chosen to study. After dispersion experiment, the number and the area occupied by fibers in each sample were counted and figured to calculate the index of dispersion in conjunction with quadrat analysis. Similar tendency was observed in the results of two experiments. The sample without addition of any surfactant resulted in the most aggregated dispersion behavior. As the length of alkyl group attached to sulfonate increases, the sample shows more dispersed behavior. The sample with the surfactant having the aryl group and the longer alkyl group shows the most dispersed behavior and it can be seen with the naked eye as well.