• Journal of the Korea institute for structural maintenance and inspection
• /
• 제11권1호
• /
• pp.95-102
• /
• 2007

It needs to Prevent damage as aging shotcrete itself exists as a dangerous component to comuting vehicles or infrastructure due to scaling, spaling, and loosening. However, it is hard to make an approach owing to a steep slope and high work, and there has been indicated a limit that it is difficult to grasp the internal condition of shotcrete on the surface. This study aimed to research internal defects that cannot be observed from the surface, by measuring a subtle thermal transfer on the shotcrete surface by using infrared thermography for overcoming such a technical limit. As a result of conducting an inspection through an analysis on measured data and fieldwork using an endoscope camera, it was impossible to accurately determine the wet part because of an excessive coating of shotcrete, yet, This study is proposed effictively extract a void part of the inside with non-destructive and non-touching method.

• Restorative Dentistry and Endodontics
• /
• 제34권1호
• /
• pp.42-50
• /
• 2009

Deterioration of long-term dentin adhesion durability is thought to occur by hydrolytic degradation within hydrophilic domains of the adhesive and hybrid layers. This study investigated the hypothesis that priming the collagen network with an organic solvent displace water without collapse and thereby obtain good bond strength with an adhesive made of hydrophobic monomers and organic solvents. Three experimental adhesives were prepared by dissolving two hydrophobic monomers, bisphenol-A-glycidylmethacrylate (Bis-GMA) and triethyleneglycol dimethacrylate (TEGDMA), into acetone, ethanol or methanol. After an etching and rinsing procedure, the adhesives were applied onto either wet dentin surfaces (wet bonding) or dentin surfaces primed with the same solvent (solvent-primed bonding). Microtensile bond strength (MTBS) was measured at 48 hrs, 1 month and after 10,000 times of thermocycles. The bonded interfaces were evaluated using a scanning electron microscope (SEM). Regardless of bonding protocols, well-developed hybrid layers were observed at the bonded interface in most specimens. The highest mean MTBS was observed in the adhesive containing ethanol at 48 hrs. With solvent-primed bonding, increased MTBS tendencies were seen with thermo cycling in the adhesives containing ethanol or methanol. However, in the case of wet bonding, no increase in MTBS was observed with aging.

• Korean Journal of Agricultural Science
• /
• 제24권2호
• /
• pp.132-137
• /
• 1997

Effective storage facilities are required to stabilize the price of agricultural and marine products to preserve their qualities due to the big fluctuation of shrimp price in Korea. It is easy to make the cave because of good conditions of the land configuration, soil and convenient transportation. The cave storage can save the cost about 40% in building site and equipment, and about 50% in maintenance comparing to existing low temperature storage facilities. The cave storage provide to improve the quality of their stored products with the low heat conductivity, the constant temperature and humidity year round. Therefore, more low temperature storage facilities are required because the items are expanded from potatoes, sweet potatoes, onions, garlics, apples and chestnuts to tangerines, grapes, cabbages, radishes, and wet ginsengs. The demands of the low temperature storage facilities can be substituted into the cave storage facilities. Thus, studies are conducted to observe the changes of the components of the pure and the seasoned salted shrimps with fermentation period during stored at room temperature in cave and to establish the storing at underground facilities to produce high quality salted fish to make profit.

• International Journal of Highway Engineering
• /
• 제6권3호
• /
• pp.1-7
• /
• 2004

Roads, like bikeways, parkways and walks, are to be just capable of supporting light traffic and traveling public, but they are required to be human friendly and environmental-oriented. Lately soil-solidifier mixture, a kind of soil-cement, has developed and has been applied to the recycling and environment-oriented pavement as the surfacing material. Soil-solidifier pavement structure has been designed by only experience. To design this pavement mechanically, it is necessary to find out basic engineering properties of soil-solidifier mixture. This study focuses on finding out mechanical characteristics of the mixture according to mixture proportions and aging. Test molds with various mixture proportions are made, and then unconfined strength tests are performed for test molds with aging of the mixture. As the result of this study, it is found that the strength of the mixture increases with amount of cement and that maximum strength is achieved at 6%$\sim$8% of the ratio of solidifier and water. The strength increase rapidly until 14 days, after then slowly. After 28 days the strength of the mixture approaches to the constant value. The heat of hydration during curing of the mixture is measured no significantly. It also shows that temperature characteristics of the mixture is similar to that of soil. Since this mixture is mixed with soil and is able to improve engineering problems in pavement due to temperature, this mixture is expected to use effectively in the environment-oriented pavement for light traffic.

• Journal of Nutrition and Health
• /
• 제41권5호
• /
• pp.439-447
• /
• 2008

There is a limitation to estimate vitamin $B_{12}$ intake due to lack of data on vitamin $B_{12}$ content in many Korean foods. In this study, vitamin $B_{12}$ content was determined in some soybean or vegetable-fermented foods, edible seaweeds and other frequently consumed foods in Korea by microbioassay using Lactobacillus delbruecki ATCC 7830. The traditional type of Doenjang and Chungkookjang contained 1.85 ${\mu}g/100$ g and 0.69 ${\mu}g/100$ g of vitamin $B_{12}$, respectively, while the factory-type of Doenjang and Chungkookjang contained 0.04-0.86 ${\mu}g/100$ g and 0.06-0.15 ${\mu}g/100$ g. Vitamin $B_{12}$ was not detected in steamed soybeans and Tofu which is a not-fermented soybean product, indicating that vitamin $B_{12}$ in Doenjang and Chungkookjang might be produced during the fermentation process. The Korean-style soy sauce contained 0.04 ${\mu}g$ vitamin $B_{12}$/100 mL, but vitamin $B_{12}$ was not detected in Japanese-style soy sauce and white miso. Commercial Kimchi, a representative Korean vegetable- fermented food, made of Korean cabbage, Yeolmu, or Mustard leaves contained 0.013-0.03 ${\mu}g$ vitamin $B_{12}$/100 g, while Kimchi without red pepper and fermented fish sauce (White Kimchi) did not. Vitamin $B_{12}$ content was very high in some edible seaweeds such as laver (66.76 ${\mu}g/100$ g dry weight) and sea lettuce (84.74 ${\mu}g/100$ g dry weight), and it was 17.12 ${\mu}g/100$ g of dried small anchovy, 1.07 ${\mu}g/100$ g of whole egg, and 0.02 ${\mu}g/100$ g of coffee mix. From these results, it is assumed that Koreans take substantial amount of vitamin $B_{12}$ from plant-origin foods. And, with these data, we will be able to calculate dietary vitamin $B_{12}$ content more correctly than before. In conclusion, soybean-fermented foods, Kimchi, laver and sea lettuce are recommendable as good sources of vitamin $B_{12}$ for vegetarians or Korean elderly on grain and vegetable based diet.