• 한국해양공학회지
• /
• 제5권1호
• /
• pp.81-87
• /
• 1991

In this paper, an attempt has been taken for improving the weldability of wer welds of TMCP steel plate by shielding around weld arc surroundings. The principal results of this experimental investigation can be summarized as follows: 1) The cooling rates resulting from wet wlds with the developed electrode on TMCP steel plate could be lower than that of the non-shieled wet welds. 2) The metallurgical characteristics in umderwater wet welds of TMCP steel plate and the developed electrode could be improved by shielding around weld arc surroundings.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.24-29
• /
• 2013

In this study, we investigated the applicability of PCC(precipitated calcium carbonate) as a raw material for the manufacture of duplex-board. Papers were made with white-ledger stock collected from the actual duplex-board mill and PCC in a laboratory, and paper properties including bulk, ash content, tensile strength, burst strength, brightness and opacity were measured. The effect of PCC on the drying energy of duplex-board was also determined by measuring the moisture content of wet web and calculating drying energy reduction. PCC increased bulk and ISO brightness significantly, which means PCC can decrease the use of virgin pulp and recycled fibers. PCC decreased the moisture content of wet web, which means PCC can decrease drying energy consumption. However, paper strength decreased as addition levels of PCC addition increased. Therefore, the addition level of PCC must be determined considering the reduction of paper strengths.

• 펄프종이기술
• /
• 제46권4호
• /
• pp.62-68
• /
• 2014

The application of conifer leave to the papermaking process as a functional organic filler was investigated in this study. The powder of the conifer leave after hot water extraction for the functional extract, such as phytoncide, was applied to OCC stock. The comparison between the commercial wood flour and the conifer leave powder as organic filler for OCC paper were conducted with various wet pressing conditions. The amount of the water removal by the wet pressing process and the bulk of handsheet were increased by the addition of the wood flour and the conifer leave powder, although the tensile strength was decreased. At the higher pressure condition of the wet pressing, the wet pressing efficiency was greatly increased by the wood flour and the conifer leave powder. There was a little difference in the performance of the wood flour and the conifer leave powder as an organic filler. Those results showed the conifer leave powder could be an alternative resource to the wood powder for papermaking organic filler.

• Journal of Ship and Ocean Technology
• /
• 제1권1호
• /
• pp.26-34
• /
• 1997

Under water wet welding is an economically alternative for the repair of offshore structures. In this paper investigations on the fatigue strength of a wet welded pipe structural member have been reported. For the connection a special sleeve patch design has been developed. The joint was fatigue tested. The evaluation of the test was carried out by means of the hot-spot approach with regard to several extrapolation rules of the hot-spot stress. Obtained results have been compared to actual classfication rules and recommendations.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1760-1769
• /
• 2007

The cut slope sliding which has been frequently encountered in Pohang area has been reported due to the rapid reduction of shear strength in mudstone after being exposed to the air. Mudstone has characteristics that it has high enough strength and stiffness in a dry condition, but the strength and stiffness decrease in a wet condition with groundwater infiltration. The case study in this paper shows that mudstone which had enough strength in a boring stage has lost the strength after installing PRD steel pipe pile inducing an insufficient bearing capacity, which has been ascertained by the static load test. Test construction has been performed to investigate the most favorable method for increasing a pile bearing capacity in mudstone with various methods such as MSG (Micro Silica Grouting) around the tip and side of a pile, the perimeter grouting combined with Micro pile reinforcement, and concrete filling after tip reinforcing grouting. From the test construction, MSG has been turned out to be the most favorable method for increasing a pile bearing capacity in mudstone, which has been confirmed by the static load test.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2001년도 추계학술발표논문집
• /
• pp.183-199
• /
• 2001

Alternative way of shaping fibers suitable for papermaking was introduced. Impact refining, which was done simply by hitting wet fibers with a metal weight vertically, was intended to keep the fibers from shortening and to cause mostly internal fibrillation. Virgin chemical pulp, its recycled one and OCC were used in the experiment. It was noticed from the experiment that impact refining on virgin chemical pulp kept the fiber length and Increased bonding properties greatly, However, in the recycled fibers from the chemical pulp, fiber length and bonding properties were decreased. In OCC, which seems to contain fractions of semi-chemical pulp and mechanical pulp (GP), and which is recycled pulp from corrugated boxes, fiber length and bonding properties were decreased disastrously. We believe recycled cellulosic fibers (recycled chemical pulp and OCC in this case), which went through hornification, were less resistant to the mechanical impact than virgin chemical pulp. For virgin chemical pulp, impact refining allowed no significant fiber length shortening, high WRV, and high mechanical strength.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2009년도 춘계학술발표회 논문집
• /
• pp.23-28
• /
• 2009

The purpose of this study was to improve not only wet-end performances but also paper characteristics by the modification of various factors like molecular design and ionic characteristics of polyacrylamides First of all physical characteristics were observed after modify molecular design of the cationic polyacrylamides to linear, branched and cross-linked. In addition it was found analysis method to confirm branch degree of cationic polyacrylamides to combine ionic titration characteristics and spectroscopic behavior, After application of these structure modified polyacrylamides to the multiple retention systems with inorganic microparticles, it was found adjusting of branch degree of polyacrylamides was very important to optimize wet-end improvement. Second, After polymerization of amphoteric polyacrylamide to have both of cationic and anionic functional group in the polymer, we observed not only physical characteristics but also wet-end improvement to apply recycled pulp and found that the improvement of solution stability to prevent hydrolysis and increase of ash retention dramatically to compare traditional cationic polyacrylamide retention aid, Finally, After polymerization of anionic polyacrylamide, we observed not only wet-end improvement but also paper characteristics to apply preflocculation of PCC and it was found the improvements of flocculation efficiency, retention, ash retention, optical properties of the paper and bursting strength to compare traditional preflocculant of cationic polyacrylamide.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.34-37
• /
• 2008

The composite materials are widely used in the many applications of industry as well as aerospace field because of their high specific stiffness and strength which benefits the material and provides potential energy savings. However, composite materials also have a low property about external applied impact. In this paper, impact tests were conducted on different sample types(glass, carbon and kevlar composite) to obtain information such as absorbed energy and composite deformation using an instrumented impact test machine (DYNATUP 8250). 3 type samples were compared to experimental results. The data from impact test provided valuable information between the different type samples by wet lay up. This paper shows results of that kevlar composite has larger absorption energy and deformation than others.

• 대한가정학회지
• /
• 제34권5호
• /
• pp.41-48
• /
• 1996

The purpose of this paper was to identify bonding strength by laundering methods(dry and wet) of the after laundering of the adhesive interlining. The results of this study were as fallows. 1.As laundery repeated it revealed that the bonding strength was decreased to some degree regardless of the kinds of face cloth, laundering methods & adhesive interlining. 2. Bonding strength of woven adhesive interlining after and before ironing is different by its weave: A1>A3>A2. 3. Bonding strength before cleaing is smaller than that after laundering with ironing. 4. As for laundering methods, while dry cleaning is excellent with little influence on bonding strength. It doesn't deform the shapes of dress, in cases of woven adhesive interlining.

• Journal of the Korean Wood Science and Technology
• /
• 제25권1호
• /
• pp.50-55
• /
• 1997

This study was carried out to utilize old newspaper(ONP) and paper sludge more effectively, and also to elucidate the influences of pressing conditions on the medium density fiberboard(MDF) properties. MDFs were made from ONP and low grade of paper sludge by wet process with change of pressing time, temperature and pressure. MDFs of ONP were more affected by pressing conditions, especially pressing pressure, but temperature and pressing time were also important. According to mixing paper sludge to ONP tensile and bending strength of MDF were decreased, but density and dimensional stability were improved. These results indicated that some physical properties of MDF can be improved by paper sludge and it is possible to use it in MDF.