• Laser Solutions
• /
• v.6 no.3
• /
• pp.29-35
• /
• 2003

In semiconductor processing, there are two types of particle contaminated onto the wafer, i.e. dry and wet state particles. In order to evaluate the cleaning performance of laser shock wave cleaning method, the removal of 1 m sized alumina particle at different particle conditions from silicon wafer has been carried out by laser-induced shock waves. It was found that the removal efficiency by laser shock cleaning was strongly dependent on the particle condition, i.e. the removal efficiency of dry alumina particle from silicon wafer was around 97％ while the efficiencies of wet alumina particle in DI water and IPA are 35％ and 55％ respectively. From the analysis of adhesion forces between the particle and the silicon substrate, the adhesion force of the wet particle where capillary force is dominant is much larger than that of the dry particle where Van der Waals force is dominant. As a result, it is seen that the particle in wet condition is much more difficult to remove from silicon wafer than the particle in dry condition by using physical cleaning method such as laser shock cleaning.

• Transactions of Materials Processing
• /
• v.14 no.9 s.81
• /
• pp.785-790
• /
• 2005

High-speed multi-pass wet wire drawing has become very common for production of high-carbon steel cord because of the increase in customer demand and production rates in real industrial fields. Although, the wet wire drawing process is performed at a high speed usually above 1000m/min, greater speed is required to improve productivity. However, in the high-carbon steel wire drawing process, the wire temperature rises greatly as the drawing speed increase. The excessive temperature rise makes the wire more brittle and finally leads to wire breakage. In this study, the variations in wire temperature during the multi-pass wet wire drawing process were investigated. A multi-pass wet wire drawing process with 21 passes, which is used to produce steel cord, was redesigned by considering the increase in temperature. Through a wet wire drawing experiment, it was possible to increase the maximum final drawing speed to 2000m/min.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2005.11a
• /
• pp.122-127
• /
• 2005

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2002.11a
• /
• pp.81-85
• /
• 2002

• The Korean Journal of Food And Nutrition
• /
• v.31 no.4
• /
• pp.511-519
• /
• 2018

The baking properties of rice bread with different percentages of butter and oil in wet and dry rice flour were investigated. The moisture, damaged starch, mean diameter, pasting properties by amylogram and RVA (Rapid Visco Analyzer), as well as thermal properties by DSC (Differential Scanning Calorimetry) of wet and dry rice flour were analyzed. The specific gravity and color (L, a, b) of the dough, as well as the appearance, color (L, a, b) and texture of the rice bread with different percentages of butter and oil in wet and dry rice flour were also analyzed. As a result, the wet rice flour were composed of a noted higher content in moisture, compared to the dry rice flour (p<0.001). The wet rice flour had lower values of damaged starch, higher values of mean diameter and a higher peak viscosity than was noted in the dry rice flour (p<0.001). The wet rice flour showed a higher degree of hydration and gelatinization than was seen in the dry rice flour (p<0.001). The prevailing principle to utilize the replacement of wet rice flour with oil had a significant effect on the volume, specific volume and hardness of the rice bread (p<0.001). The hardness of the rice bread also showed a decreasing trend as the amount of the added oil was increased into the mixture. These results suggest that the replacement of wet rice flour with 5.8% oil is effective for the production of rice bread.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.3
• /
• pp.501-505
• /
• 2020

Objective: The purpose of this study was to investigate the effects of aging methods (AM) i.e. dry-aging (DA) and wet-aging (WA) on the physicochemical properties and in vitro digestibility of proteins in beef short loin. Methods: Short loins (M. longissmus lumborum), were trimmed and boned-out on the fifth day postmortem, from a total of 18 Hanwoo, which were purchased from a commercial slaughterhouse. Short loins were separated randomly grouped into one of the three treatments: control, WA (1℃, 7 days), and DA (1℃, 0.5 m/s, 85% relative humidity [RH], 30 days). Results: Dry-aged beef (DAB) exhibited higher pH, water holding capacity (WHC), myofibrillar fragmentation index (MFI), and digestibility, however lower lightness, redness, and yellowness values, cooking loss, and shear force (SF), than those of wet-aged beef (WAB) (p<0.05). The myosin light chain band intensity of DAB was higher than that of control and WAB in sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The in vitro digestibility of aged beef was highly (p<0.001) correlated to physicochemical properties except WHC. The correlation coefficient between AMs and WHC was higher than that between AM and SF (p<0.05) or MFI (p<0.001). A high correlation was observed between SF and MFI (p<0.001). Conclusion: Thus, we believe that DAB is more advantageous than WAB owing to its high digestibility and WHC and low SF.

• Fashion & Textile Research Journal
• /
• v.15 no.3
• /
• pp.444-451
• /
• 2013

This paper surveys the physical properties of aramid and aramid/nylon hybrid air-jet textured yarns(ATY) for protective garments according to wet and dry texturing conditions. Aramid and nylon filaments were used to make two kinds of para-aramid ATY and four kinds of aramid/nylon hybrid ATY with dry and wet treatments. The analyzed physical properties of six specimens (made on the ATY machine) are as follows. The tenacity and initial modulus of aramid and aramid/nylon hybrid ATY decreased with the wetting and breaking strain; however, the yarn linear density of aramid and hybrid ATY increased with wetting treatment. The dry and wet thermal shrinkage of the hybrid ATY increased with wetting. The stability of aramid and hybrid ATY also increased with wetting. The physical properties of core/effect type hybrid ATY showed significantly more change than the core type hybrid ATY and the physical properties of nylon/aramid core/effect hybrid ATY showed significantly more change than the of aramid/nylon core/effect hybrid ATY. A higher bulky and breaking strain of hybrid ATY require ATY processing conditions of nylon on the core part with wetting and aramid on the effect part. ATY processing conditions for nylon and aramid on the core part with wetting are required for a higher tenacity and modulus. ATY processing conditions of nylon and aramid on the core with no wetting are required for a low thermal shrinkage.

• Journal of Biomedical Engineering Research
• /
• v.26 no.1
• /
• pp.49-54
• /
• 2005

This paper presents a design of 1-channel active dry electrode module for EEG from one's forehead. The IA(instrumentation amplifier) circuit inside the module is based on the configuration sown on the paper MettingVanRijn et al. We analyze the IA circuit to find out the related equation, and then compare its simulated characteristic with the result obtained from the real active dry electrode circuit. With the active dry electrode and the wet(Ag/AgCI) electrode connected to the separated analog processing module on one's forehead at the same time, their real time and FFT outputs of EEG are examined for comparison. The active dry electrode module has advantages over the wet electrode and its analog processing module: 1) The size of the analog processing circuit of the active dry electrode module is smaller than that of existing EEG analog processing module; 2) the total cost required to make the proposed analog processing circuit is much lower than that of the existing circuit, since the designed circuit needs smaller parts; 3) the electrical characteristic is comparable to the general EEG analog processing module even if the designed module has simpler circuit configuration.

• Journal of Powder Materials
• /
• v.21 no.2
• /
• pp.142-146
• /
• 2014

Fundamental experiences have been studied for development of pre-treatment process of Sn by-products such as solders. Dry and wet separation/recovery processes were considered by the differences of physical properties. The by-products, which are analyzed by solder metal and oxides. The metal and oxide were simply separated by dry ball-milling process for 12 hours, after that recovery metal powder might be reusable as lead or lead-free solders. In terms of wet separation process, samples were dissolved in $HNO_3+H_2O_2$ and the precipitation were analyzed by $SnO_2$. Overall efficiency of recovery might be increasing via developing simple pre-treatment process.

• Fibers and Polymers
• /
• v.6 no.2
• /
• pp.162-168
• /
• 2005

A methodology for the objective evaluation of water repellency is studied using image analysis of the sprayed pattern on woven fabrics according to a standard spray test (AATCC Test Method 22-2001). The wet area ratio obtained from the spray standard test ranking is found to be exponentially related with its water repellency rating. Mean filtering is used to remove the effect of weave texture and the transmitted light through interyarn spaces. The ring frame of the instrument and wet region are recognized using Otsu thresholding technique. And Hough transform and outline operation are used to obtain the size and position of the ring frame. The objective assessment of the water repellency using image processing can reduce unnecessary confusion in the subjective determination of the water repellency.