• Journal of the Korean Wood Science and Technology
• /
• 제23권2호
• /
• pp.70-76
• /
• 1995

본 연구는 왁스첨가순서(添加順序), 첨가량(添加量), 왁스종류(種類)가 Isocyanate 접착(接着) PB의 성질(性質)과 내수성(耐水性)에 미치는 영향(影響)을 구명(究明)하기 위해서 실시(實施)되었다. 왁스첨가순서(添加順序)는 PB의 기계적(機械的) 성질(性質) 및 내수성(耐水性)에 유의적(有意的)인 영향(影響)을 미치지는 않았다. 왁스에멀젼 첨가량(添加量)을 증가(增加)시킴으로써 접착력(接着力) 및 휨강도(强度) 내수(耐水) MOR은 감소(減少)되었지만 상태(常態) MOR 및 MOE는 감소(減少)되지 않았다. 상태접착력(常態接着力), 상태(常態) 및 내수(耐水) MOR과 MOE는 솔리드왁스량(量)을 증가(增加)시킴으로써 감소(減少)되지 않았지만 내수접착력(耐水接着力)은 감소(減少)되었다. 1% 및 1.5% 왁스량(量)을 첨가(添加)한 보드는 0.5% 왁스를 첨가(添加)한 보드와 비교(比較)해 보았을 때 내수성(耐水性)이 증가(增加)되지는 않았다. 솔리드왁스를 첨가(添加)한 보드의 접착력(接着力)은 왁스에멀젼을 첨가(添加)한 보드보다 더 좋은 결과(結果)를 나타내었다. 휨강도(强度)의 MOR 및 MOE, 내수성(耐水性)은 솔리드왁스와 왁스에멀젼간에 유의적(有意的)인 차이(差異)를 보이지는 않았다.

• 한국세라믹학회지
• /
• 제13권1호
• /
• pp.35-44
• /
• 1976

The effect of quartz which exists in clays, especially in kaolin used for the production of chamotte sagger, on the strength of refractory was examined. In this study, a mixture of chamotte 50%, kaolin 25%, plastic clay 25% in ternary component system was selected as a batch composition. To this mixture 1%, 3% and 5% of feldspar and sericite were added respectively. The plastic clay used here was separated under 170 mesh by dry process. Feldspar and sericite were separated under 325 mesh by dry process. Feldspar and sericite were separated under 325 mesh by dry process. In order to change the particle size and the content of quartz, the kaolin was separated under 60, 115, 170 and 325 mesh by wet process, substituted quartz for coarse parts of it. Chamotte was classified into three grades, coarse (5-10mesh): medium (10-20mesh): fine(20-115mesh) and the ratio was 1:1:1. Samples were formed in 0.8xIx10cm size with 12.5% water at 160kg/$\textrm{cm}^2$ pressure, and fired at 130$0^{\circ}C$ for 1 hr. The fired samples were ivnestigated by means of x-ray diffraction analysis and microscopic observation, and the physical properties of them were also examined, such as firing shrinkage, apparent specific gravity and bulk specific gravity, apparent porosity, water absorption and modulus of rupture. The obtained results are as follows: 1. When screened kaolin with low content of quartz was added to fixed chamotte-plastic clay system, the sample lowered modulus of rupture and increased apparent porosity as the size of kaolin became finer. 2. When kaolin under 325 mesh with 7.2-15.81% quartz between 60-325 mesh was added to fixed chamotte-plastic clay system, the sample had higher apparent porosity and lower modulus of ruputure as the size and the amount of quartz became larger. 3. The addition of feldspar and sericite to chamotte-plastic clay system improved apparent porosity and modulus of rupture. The effect of feldspar was better when quartz content was low, although that of sericite was better than quartz content was high.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1351-1353
• /
• 1994

High strengh pocelain insulators with 35wt% alumina were manufactured by wet produce technique. The microstructure and crystalline phases of this samples and the effect of CaO addition to insulator bodies were studied. Electrical and mechanical properties (permittivity, dissipation factor, modulus of rupture, Young's modulus etc,) were studied. The relation between microstructure and electrical, mechanical properties were analyzed.

• Journal of the Korean Wood Science and Technology
• /
• 제33권5호통권133호
• /
• pp.66-75
• /
• 2005

Soybean-based adhesives have recently been reconsidered as alternatives to petroleum-based adhesives due to the uncertainty of availability of petrochemical products and the increased demand for wood adhesives. This study was conducted to investigate the adhesive properties of alkaline phenolic soy (APS) resin for hybrid poplar flakeboard. The APS resin was formulated by crosslinking an alkaline soy flour hydrolyzate with lab-prepared PF resin in the soy hydrolyzate to PF resin weight ratios of 70/30, 60/40, and 50/50. The APS resins were used to fabricate homogeneous hybrid poplar flakeboards with different resin solid levels (5%, 7%, and 9%), press temperatures (175 and $200^{\circ}C$), and press times of 8 and 10 minutes. The IB, wet MOR, and dimensional stability properties of board improved with increasing press time, press temperature, and PF level in APS resins. Increasing press time can be used to offset poor IB strength associated with a 9% resin solid level and the excessive moisture content in the mat. The following conditions were concluded to meet the requirements of the CSA standard for exterior-grade flakeboard: a 50% PF level, a 5% resin content, a $200^{\circ}C$ press temperature, and an 8 minute press time.

• Journal of the Korean Wood Science and Technology
• /
• 제29권3호
• /
• pp.36-46
• /
• 2001

This study was to find a way of reusing wood and plastic wastes, which considered as a troublesome problem to be solved in this age of mass production and consumption, in manufacturing wood fiber-polypropylene fiber composite panel. And the feasibility of this composite panel as a substitute for existing headliner base panel of automobile was also discussed, especially based on physical and mechanical performance. Nonwoven web composite panels were made from wood fiber and polypropylene fiber formulations of 50 : 50, 60 : 40, and 70 : 30, based on oven-dry weight, with densities of 0.4, 0.5, 0.6, and 0.7 g/$cm^3$. At the same density levels, control fiberboards were also manufactured for performance comparison with the composite panels. Their physical and mechanical properties were tested according to ASTM D 1037-93. To elucidate thickness swelling mechanism of composite panel through the observation of morphological change of internal structures, the specimens before and after thickness swelling test by 24-hour immersion in water were used in scanning electron microscopy. Test results in this study showed that nonwoven web composite panel from wood fibers and polypropylene fibers had superior physical and mechanical properties to control fiberboard. In the physical properties of composite panel, dimensional stability improved as the content of polypropylene fiber increased, and the formulation of wood fiber and polypropylene fiber was considered to be a significant factor in the physical properties. Water absorption decreased but thickness swelling slightly increased with the increase of panel density. In the mechanical properties of composite panel, the bending modulus of rupture (MOR) and modulus of elasticity (MOE) appeared to improve with the increase of panel density under all the tested conditions of dry, heated, and wet. The formulation of wood fiber and polypropylene fiber was considered not to be a significant factor in the mechanical properties. All the bending MOR values under the dry, heated, and wet conditions met the requirements in the existing headliner base panel of resin felt.

• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.67-78
• /
• 1990

This study was performed to determine the characteristics of physical and mechanical properties of domestic wood based materials; plywood, particleboard, medium density fiberboard. Main items of tested properties were panel size, moisture content, water absorption, linear expansion and thickness swelling, glue bond shear strength, bending properties(stress at proportional limit, modulus of rupture. modulus of elasticity), tensile strength, screw holding strength, and internal bond as neccessary. the results were discussed mainly with Korean Standards. The obtained conclusions are as follows; 1. Length and width of 3mm thin plywood(3-ply) and 12mm thick plywood(7-ply) were satished with KS-standard, but thicknesses of these panels were not- passed tolerance limit except one of eight makers. 2. Length and width of particleboard and medium density fiberboard were greater than the tolerance limit value of KS standard, but the thicknesses of these panels were passed this value. 3. Moisture contents of 12mm thick and 3mm thin plywood were satisfied with KS-standard except one mill made 3mm thin plywood. 4. Moisture absortion of plywood was not passed tolerance limit of KS-standard but particleboard was satisfied with this standard value. 5. Dry and wet shear strengths in glue bond of 3mm thin plywood were not reached to KS-standard, but those of 12mm thick plywood were sufficiently satisfied with KS standrad. 6. Modulus of ruptures, parallel to grain and perpendicular to grain of plywood, and particleboard and medium density fiberboard were satisfied with KS-standard. 7. Tensile strengths, parallel to grain and perpendicular to grain of plywood were satisfied with allowance stress of US product standard PS 1-74. 8. Screw holding strength of particleboard was not reached to KS standard, but internal bond was satisfied with KS standard.

• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.253-264
• /
• 2019

This study characterized the chemical compounds in tannin from mangium (Acacia mangium) bark extract and determined the physical-mechanical properties of glued laminated timber (glulam) made from sengon (Falcataria moluccana), jabon (Anthocephalus cadamba), and mangium wood. The adhesives used to prepare the glulam were based on mangium tannin and phenol resorcinol formaldehyde resin. Five-layer glulam beams measuring $5cm{\times}6cm{\times}120cm$ in thickness, width, and length, respectively, were made with a glue spread of $280g/m^2$ for each glue line, cold pressing at $10.5kgf/cm^2$ for 4 h and clamping for 20 h. Condensed mangium tannin consisted of 49.08% phenolic compounds with an average molecular weight of 4745. The degree of crystallinity was 14.8%. The Stiasny number was 47.22%. The density and the moisture content of the glulams differed from those of the corresponding solid woods with mangium having the lowest moisture content (9.58%) and the highest density ($0.66g/cm^3$). The modulus of rupture for all glulam beams met the JAS 234-2003 standard but the modulus of elasticity and the shear strength values did not. Glulam beams made with tannin had high delamination under dry and wet conditions, but glulam made from sengon and jabon wood met the standard's requirements. All glulam beams had low formaldehyde emissions and were classified as $F^{****}$ for formaldehyde emissions according to the JAS 234 (2003) standard.

• 농업과학연구
• /
• 제13권1호
• /
• pp.113-122
• /
• 1986

옥수수 수확(收穫)의 기계화(機械化) 사업(事業)을 촉진(促進)시키기 위(爲)하여, 옥수수립(粒)의 제반압축특성(諸般壓縮特性)을 규명(糾明)하며 모든 기계화(機械化) 작업도정(作業過程)에서 손상율(損傷率)이 최소(最小)로 되는 기계(機械)의 설계자료(設計資料)를 얻고자 함수율(含水率)이 옥수수립(粒)의 압축특성(壓縮特性)에 미치는 영향(影響)을 구명(究明)하기 위(爲)하여 국내재배(國內栽培)한 3품종(品種)의 옥수수를 공시재료(供試材料)로 압축방향(壓縮方向)은 평면(平面), 측면(側面), 직립(直立)의 3 수준(水準), 함수율(含水率)은 약(約) 13, 17, 21, 25%(w.b)의 4수준(水準)으로 하고 재하속도(載荷速度) 1.125mm/min의 준(準) 정하량(靜荷重)에서 Straingage system을 이용(利用), 평판축시험(平板縮試驗)을 실시(實施)하여 옥수수의 강복점(降伏點) 및 파괴점(破壞點)에 대(對)한 압축응력(壓縮應力), 변형(變形), 에너지 및 강성계수(剛性係數)를 측정(測定), 분석(分析)하였으며 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 옥수수의 함수율(含水率)이 약(約)12.5~24.5%(w.b)의 범위(範圍)일 때 평면위치(平面位置)의 강복하중(降伏荷重)은 13.63~26.73kg, 최대압축강도(最大壓縮强度)는 21.55~47.65kg 으로 함수율(含水率)이 약(約) 17% 일 때 최소(最小), 약(約) 21% 일 때 최대(最大)였으며, 측면(側面) 강복하중(降伏重荷)은 13.58~6.70kg 이었고, 측면(側面)의 최대압축강도(最大壓縮强度) 16.42~7.82kg은 직립(直立)의 최대압축강도(最大壓縮强度)인 18.55~9.05kg 보다 약간 작게 나타났다. 2. 함수율(含水率)이 약(約) 12.5~24.5%의 범위(範圍)에서, 강복변형(降伏變形)은 0.43~1.37mm, 파괴변형(破壞變形)은 0.70~2.66mm로 함수율(含水率)에 비례(比例) 변형(變形)하였으며 함수율(含水率)이 높을수록 변형율(變形率)도 증가(增加)하였다. 3. 옥수수의 함수율(含水率)이 약(約) 12.5~24.5%일 때, 탄성(彈性)에너지는 $2.60{\sim}8.57kg{\cdot}mm$, 인성에너지는 $6.41{\sim}34.36.kg{\cdot}mm$로 함수율(含水率)이 증가(增加)할수록 측면(側面)의 인성에너지는 증가(增加)하였고, 직립(直立)의 경우에 감소(減少)하여 22~23%의 함수율(含水率) 구간(區間)에서 측면(側面)과 직립(直立)에 압축(壓縮)에 관(關)한 인성에너지의 값은 동일(同一)하였다. 4. 강성계수(剛性系數)는 함수율(含水率)의 증가(增加)에 따라 감소(減少)하였고, 측면(側面)의 32.07~5.86kg/mm 보다 평면압축(平面壓縮)에서 42.12~18.68kg/mm로 컸으며 수원(水原)19호(號)가 부여계통(扶餘系統)보다 크게 나타났다. 5. 옥수수는 평면(平面)에 관(關)한 압축특성(壓縮特性)이 각종(各種) 기계(機械) 설계(設計)의 자료(資料)로 가장 중요(重要)하며, 함수율(含水率)이 약(約) 12.5~17%(w.b)일 때 최소(最少)의 분쇄(粉碎)에너지가 소요(所要)되며, 약(約) 19~24%(w.b)의 함수율(含水率)에서 옥수수를 조작(操作)할 때 곡립손상(穀粒損傷)을 감소(減少)시킬 수 있을 것으로 사료(思料)된다.