• 한국수자원학회논문집
• /
• 제37권11호
• /
• pp.959-967
• /
• 2004

충북 청주시에 위치한 충북대학교에서 강수에 따른 습성강하물 중의 TN, TP 및 COD의 농도와 오염부하를 조사하였다 강수사상에 대한 샘플은 1998년에서 2003년까지 채집되었다. 오염물질의 강수량가중평균 농도는 TN이 0.60mg/L, TP가 0.014mg/L, COD는 4.8mg/L이었는데, 이는 각각의 산술평균보다 26, 18, 14% 작게 나타났다. TN, TP 및 COD의 농도는 강수량이 증가함에 따라 감소하는 경향을 나타냈다. 모든 수질항목은 됨에 가장 많이 나타났는데, 이는 풍식 및 황사에 의한 먼지, 꽃가루 등 때문으로 생각된다. 습성강하물의 평균 연간부하는 TN 7.9kg/ha$\cdot$yr, TP 0.19kg/ha$\cdot$yr, COD 53.9ka/ha$\cdot$yr로 나타났는데, 이를 일본에서 보고된 각각의 연간부하와 비교하면 TN과 TP는 비슷했으나, COD는 약간 놀게 나타났다.

• 한국환경과학회지
• /
• 제27권3호
• /
• pp.179-193
• /
• 2018

Nitrogen budgets in Sihwa-ho in 2010 were estimated using a mass balance approach. Major nitrogen fluxes sources can be divided into three sections: cities, agricultural area, and forest. Surplus nitrogen 2,030~2,214 ton/yr (2,123 ton/yr in average) was discharged to Sihwa Lake. 20% of the surplus nitrogen is removed from the wetland and 60% is removed tidal flats. Therefore net nitrogen discharge from Sihwa basin is estimated to be 650~708 ton/yr (679 ton/yr in average). Wet and dry nitrogen deposition and load from non-point sources ware estimated to be 97 ton/yr and 69 ton/yr, deposition is using CAMx model. So estimated total nitrogen discharge into Sihwa-ho was 817~875 ton/yr (846 ton/yr in average). The atmospheric load explains 11.1~11.9% (11.5% in average) of the total nitrogen load Sihwa-ho.

• Tribology and Lubricants
• /
• 제35권2호
• /
• pp.87-93
• /
• 2019

This work aims to develop a dry lubricant for oilless bush, especially a solid lubricant, thereby creating a coating method with improved properties of anti-friction and load-carrying capacity without oil lubrication. In this work, spherical-shaped powders of thermosetting resin such as polyimide (PI) are mixed with a binder matrix obtained by mixing a fluorocarbon compound resin such as Polytetrafluoroethylene (PTFE) or Ethylene tetra fluoro ethylene (ETFE) with itself or with a non-fluorocarbon thermoplastic resin such as Polyether ether ketone (PEEK). And these dry lubricant mixtures are thickly coated (200-300 mm in the thickness) on the inner surface of the bush by using a wet-typed air-spray deposition method. It was found that the load-carrying capacity of the solid lubricant for excavator bush (60 mm in diameter) that operates under a high load condition (at 40 MPa) is greatly improved owing to the spherical-shaped powders of thermosetting resin. In addition, the coefficient of friction at the sliding surface is also reduced less than 0.1. Thick coating also lowers the contact stress at the edge of a bush that results in better tribological performances. The result suggests that the lubrication performance and durability life of the bush can be remarkably improved even without lubrication (oil or grease).