• 제목/요약/키워드: well losses

검색결과 624건 처리시간 0.026초

HAI 제어기에 의한 SynRM 드라이브의 효율 최적화 제어 (Efficiency Optimization Control of SynRM Drive with HAI Controller)

  • 정동화;최정식;고재섭
    • 조명전기설비학회논문지
    • /
    • 제20권4호
    • /
    • pp.98-106
    • /
    • 2006
  • 본 논문은 동손과 철손을 최소화 하는 SynRM을 위하여 효율 최적화 알고리즘을 제시하였다. 속도 제어기의 설계는 퍼지제어와 신경회로망을 사용한 적응 퍼지-신경회로망(AFNN) 제어기에 기반을 두었다. 특정 토크는 d와 q축의 전류성분의 다양한 합성으로 얻을 수 있다. 효율최적화 제어는 정상상태에 일정한 동작점에서 최소 손실을 제공하는 d와 q축 전류 성분의 조합을 찾는다. 직접 조절되는 토크 발생은 효율최적화 제어 설계에 의하여 매우 잘 조절되어지는 전류 성분이다. 제시된 알고리즘은 속도변화와 양호한 토크제어를 위해 전자기적 손실을 허용한다. HAI 제어기의 제어성능은 다양한 동작상태 분석을 통하여 평가한다. 분석된 결과는 제시된 알고리즘의 타당성을 보여준다.

강교의 생애주기비용 최적설계 (Optimum Life-Cycle Cost Design of Steel Bridges)

  • 조효남;이광민;김정호;최영민;봉연종
    • 한국강구조학회 논문집
    • /
    • 제15권4호통권65호
    • /
    • pp.341-358
    • /
    • 2003
  • 본 논문에서는 강교의 실용적인 생애주기비용 (LCC) 최적설계를 위한 일반화된 정식화와 LCC 설계시스템 모델을 제안하였다. 강교 최적설계를 위한 LCC는 초기비용, 직접 복구 (rehabilitation) 비용과 인적 혹은 물적 손실비용의 직접비용, 도로이용자비용, 그리고 사회-경제 손실비용을 포함한 간접비용의 현재가치의 합으로 정식화하였다. 특히 본 논문에서는 교량이 속해 있는 도로의 네트워크를 고려한 도로이용자비용과 사회-경제 손실비용 산정을 위한 새로운 모델을 제안하였다. 본 연구에서 제안된 LCC 정식화 모델은 실제 강박스 거더교와 강상판형교의 LCC 최적설계 문제에 적용하였고, 다양한 경우에 대한 LCC의 효율성에 대해 비교 고찰하였다. LCC를 고려한 강교량의 최적설계는 설계시방서에 기초한 설계방법뿐만 아니라 초기비용 절감을 위한 최적설계 방법과 비교할 때 더욱 합리적이고, 경제적이며, 안전한 설계를 유도할 수 있으리라 판단된다.

인터리브 방식 삼상 절연형 고효율 부스트 컨버터 (Three-Phase Interleaved Isolated High Efficiency Boost Converter)

  • 최정완;차한주
    • 전력전자학회논문지
    • /
    • 제14권6호
    • /
    • pp.496-503
    • /
    • 2009
  • 이 논문은 새로운 인터리브 방식 삼상 절연형 고효율 부스트 컨버터를 제안한다. 이 컨버터는 삼상 전력변환 방식을 채택하여 보다 큰 전력전송 능력을 갖으며 각 상의 rms 전류값이 작으므로 전도손실도 작다. 이에 더하여, 삼상 부스트 컨버터의 인터리브 동작으로 인하여 입력 전류 리플이 줄어들고, 실효 동작 주파수의 증가로 필터소자의 크기가 작아져서 높은 전력밀도를 갖는다. 부스트 컨버터 출력의 각 상 전류는 제안된 3 상 PWM 구동방식에 따라 전류 연속모드로 동작하여 3 상 변압기로 통합된다. 이 컨버터는 전도손실이 작아 96% 이상의 효율로 동작하며 능동클램프의 작용으로 스위칭 손실도 역시 작다. 제안된 컨버터와 PWM 구동방식을 분석 및 시뮬레이션 하고 하드웨어로 제작하였다. 제작된 시제품을 500 W 급으로 실험하여 모든 설계검증 및 해석을 실시하였다.

Distinguishing the Effects of Environmental Stress and Forest Succession on Changes in the Forest Floor

  • Arthur, Mary A.;Ruth D. Yanai
    • The Korean Journal of Ecology
    • /
    • 제23권2호
    • /
    • pp.83-88
    • /
    • 2000
  • When interpreting change over time in forest ecosystems, distinguishing the effects of forest succession from the effects of environmental stress can be difficult. The result may be a simplistic interpretation. citing a specific successional or environmental cause of forest change when both types may be occurring. We present two case studies of changes in the forest floor in northern hardwoods. First, the belief that 50% of soil organic matter is lost in the first 20 years after logging was based on a study comparing northern hardwood stands of different ages. We resampled a series of 13 such stands after an interval of 15 years, and found that the young stands were not, in fact. losing organic matter as rapidly as predicted from the original chronosequence study. The pattern of higher organic matter content in the forest floors of older stands compared to young stands could be equally well explained by changes in logging practices over the last century as by the aging of the stand. The observed pattern of forest floor organic matter as a function of stand age was previously interpreted as a successional pattern, ignoring changes in treatment history. In the second case study, observed losses of base cations from the forest floor were attributed to cation depletion caused by acid rain and declining calcium deposition. We found that young stands were gaining base cations in the forest floor; losses of base cations were restricted to older stands. Differences in litter chemistry in stands of different ages may explain some of the pattern in cation gains and losses. In this case, the contribution of successional processes to cation loss had been overlooked in favor of environmental stress as the dominant mechanism behind the observed changes. Studies of environmental stress use repeated measures over time. but often don't consider stand age as a factor. Studies of successional change often assume that environmental factors remain constant. We were able to consider both forest succession and external factors because we repeatedly sampled stands of different ages.

  • PDF

개선된 SNOOP 기법을 이용한 무선 TCP 성능향상 방안 (Wireless TCP Enhancement by Modifying SNOOP)

  • 문영성;강인석
    • 한국정보과학회논문지:정보통신
    • /
    • 제32권1호
    • /
    • pp.12-19
    • /
    • 2005
  • 현재 가장 널리 쓰이는 수송계층 프로토콜인 TCP는 패킷 손실의 원인을 망의 혼잡 때문에 일어난다고 가정하고 있으므로 기존의 유선망과 고정 호스트로 이루어진 전통적인 네트워크에 적합하다. 그러나 무선 링크에서의 패킷 손실은 대부분 혼잡에 의해서가 아니라 높은 에러율과 핸드오프에 의해 발생하게 되므로 기존의 TCP를 그대로 사용하게 되면 불필요한 혼잡제어 메커니즘의 호출로 성능의 저하를 가져온다. 현재까지 무선환경에 적합한 TCP를 위한 많은 방안이 제시되고 있다. 이 가운데 SNOOP 기법은 무선링크에서 패킷 손실이 생겼을 경우 송신측에서 재 전송하는 것이 아니라, 지역 재전송에 기반을 두고 있기 때문에 무선 링크의 손실로 인해 유선 링크가 영향을 받는 것이 아니므로 매우 적절한 해결책이다. 하지만 SNOOP은 캐쉬에 재전송할 데이타가 없으면 성능의 저하를 초래하는 것이 단점이다. 본 논문에서는 SNOOP의 단점을 보완하는 기법을 제안한다. 제안하는 기법은 패킷손실의 원인을 판별하여 불필요한 혼잡제어 메커니즘의 호출을 줄여 성능을 개선한다.

무선 환경에서 802.11 MAC의 MIB 정보를 이용한 TCP 성능 개선 방법 (TCP Performance Improvement Scheme Using 802.11 MAC MIB in the Wireless Environment)

  • 신광식;김기원;윤준철;김경섭;장문석;최상방
    • 한국통신학회논문지
    • /
    • 제33권7B호
    • /
    • pp.477-487
    • /
    • 2008
  • TCP에서의 혼잡제어는 패킷 손실이 발생하면 이를 네트워크의 혼잡상황으로 판단해서 전송률을 줄인다. 무선 네트워크에서는 채널 에러로 인해 패킷 손실이 발생하는데, 기존의 유선환경에서의 TCP는 이를 혼잡으로 인한 손실로 착각하여 성능을 떨어뜨리는 결과를 초래한다. 그러므로 유 무선 통합네트워크에서의 TCP 성능 저하를 막기 위해 혼잡손실과 무선손실을 구별하는 연구가 진행되고 있다. 기존의 무선 TCP에 대한 연구는 주로 패킷이 전달되는 시간의 변화를 통해 네트워크의 혼잡상황을 유추해서 패킷 손실 시 혼잡손실과 무선손실을 예측하지만, 패킷의 전송시간은 여러 가지 다른 요인에 영향을 받기 때문에 정확한 손실구분은 불가능하다. 그러므로 본 논문에서는 IEEE 802.11 MAC에서 정의하고 있는 MIB(Management Information Base)의 무선손실 정보를 이용하여 유선손실과 무선손실을 구별하는 알고리즘을 제안한다. MAC 계층의 MIB를 수집하여 사용하는 제안된 알고리즘과 패킷의 지연 시간을 이용하는 기존의 알고리즘을 시뮬레이션을 통하여 비교하고 분석한 결과 무선 채널에서의 에러율이 10%인 경우에, Spike 알고리즘에 비해 12%, mBiaz 알고리즘에 비해 32%의 성능 향상을 보였다.

FNPI 제어기예 의한 SynRM의 효율 최적화 제어 (Efficiency Optimization Control of SynRM with FNPI Controller)

  • 강성준;고재섭;최정식;장미금;백정우;정동화
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
    • /
    • pp.29-31
    • /
    • 2009
  • Optimal efficiency control of synchronous reluctance motor(SynRM) is very important in the sense of energy saving and conservation of natural environment because the efficiency of the SynRM is generally lower than that of other types of AC motors. This paper is proposed an efficiency optimization control for the SynRM which minimizes the copper and iron losses. The design of the speed controller based on fuzzy-neural networks (FN)-PI controller that is implemented using fuzzy control and neural networks. There exists a variety of combinations of d and q-axis current which provide a specific motor torque. The objective of the efficiency optimization control is to seek a combination of d and q-axis current components, which provides minimum losses at a certain operating point in steady state. It is shown that the current components which directly govern the torque production have been very well regulated by the efficiency optimization control scheme. The proposed algorithm allows the electromagnetic losses In variable speed and torque drives to be reduced while keeping good torque control dynamics. The control performance of the proposed controller is evaluated by analysis for various operating conditions. Analysis results are presented to show the validity of the proposed algorithm.

  • PDF

비구조요소의 내진 설계를 위한 기존 층응답스펙트럼의 평가 (A Study on Evaluation of Floor Response Spectrum for Seismic Design of Non-Structural Components)

  • 최경석;이원호;양원직;김형준
    • 한국지진공학회논문집
    • /
    • 제17권6호
    • /
    • pp.279-291
    • /
    • 2013
  • The seismic damage of non-structural components, such as communication facilities, causes direct economic losses as well as indirect losses which result from social chaos occurring with downtime of communication and financial management network systems. The current Korean seismic code, KBC2009, prescribes the design criteria and requirements of non-structural components based on their elastic response. However, it is difficult for KBC to reflect the dynamic characteristics of structures where non-structural components exist. In this study, both linear and nonlinear time history analyses of structures with various analysis parameters were carried out and floor acceleration spectra obtained from analyses were compared with both ground acceleration spectra used for input records of the analyses and the design floor acceleration spectrum proposed by National Radio Research Agency. Also, this study investigates to find out the influence of structural dynamic characteristics on the floor acceleration spectra. The analysis results show that the acceleration amplification is observed due to the resonance phenomenon and such amplification increases with the increase of building heights and with the decrease of structure's energy dissipation capacities.

SIMULINK$\circledR$를 이용한 터보프롭 엔진의 성능모사 (Performance Simulation of Turboprop Engine using SIMULINK$\circledR$)

  • 공창덕;노흥석
    • 한국추진공학회지
    • /
    • 제5권2호
    • /
    • pp.44-50
    • /
    • 2001
  • SIMULIINK$\circledR$를 이용하여 항공기용 터보프롭 엔진을 모델링한 후 현재 KT-1의 추진기관인 PT6A-62 분리축 터보프롭엔진의 성능을 해석하였다. SIMULIINK$\circledR$ 모델의 검증을 위하여 상용해석 프로그램인 GSTURB 와 비교한 결과 최대오차율 1.07% 이내로 확인되었다. 지상정지 조건에서 블리드 공기유량을 0에서 5%, 보기류 구동에 따른 출력손실을 0에서 20 hp로 가정하고 해석한 결과 축마력은 최대 0.68%감소하며 비연료소모율은 거의 영향을 받지 않음을 알 수 있었다.

  • PDF

무효전력을 고려한 한계송전손실계수 산정 방법론 개발 및 현물시장에의 적용 (The Development of the Transmission Marginal Loss Factors with Consideration of the Reactive Power and its Application to Energy Spot Market)

  • 박종배;이기송;신중린;김성수
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제52권7호
    • /
    • pp.429-436
    • /
    • 2003
  • This paper presents a new approach for evaluating the transmission marginal loss factors (MLFs) considering the reactive power. Generally, MLFs are represented as the sensitivity of transmission losses, which is computed from the change of the generation at reference bus by the change of the load at the arbitrary bus-i. The conventional evaluation method for MLFs uses the only H matrix, which is a part of jacobian matrix. Therefore, the MLFs computed by the existing method, don't consider the effect of the reactive power, although the transmission losses are a function of the reactive power as well as the active power. To compensate the limits of the existing method for evaluating MLFs, the power factor at the bus-i is introduced for reflecting the effect of the reactive power in the evaluation method of the MLFs. Also, MLFs calculated by the developed method are applied to energy spot markets to reflect the impacts of reactive power. This method is tested with the sample system with 5-bus, and analyzed how much MLFs have an effect on the bidding/offer price, market clearing price(MCP), and settlement in the competitive energy spot market. This paper compared the results of MLFs calculated by the existing and proposed method for the IEEE 14-bus system, and the KEPCO system.