• 한국응용과학기술학회지
• /
• 제24권1호
• /
• pp.79-85
• /
• 2007

The diffusion behavior of phenol, toluene and benzoic acid in aqueous SDS solution was examined. It showed a similar experimental results for phenol and toluene. The diffusion coefficients of the solutes were characterized by the presence of two distinct regions: below the cmc and above the cmc. For phenol and toluene, it remained approximately unchanged when the SDS concentration was below the cmc. Above the cmc there was an apparent decrease in the diffusion coefficients of the two solutes with increasing SDS concentration. However, for benzoic acid the diffusion behavior was different from that of phenol and toluene. The diffusion coefficient of benzoic acid decreased slightly with increasing SDS concentration, however the diffusion coefficient was almost constant above the cmc. For benzoic acid the diffusion behavior was dependent on the joint contribution of benzoic acid molecules as well as the benzoate ions.

• 한국전기전자재료학회논문지
• /
• 제13권11호
• /
• pp.954-958
• /
• 2000

The characterization of zinc diffusion processes applied for high-speed avalanche photodiodes has been examined. The different diffusion process conditions for InP test structures were explored. The zinc diffusion profiles, such as the diffusion depth and the zinc dopant concentration, were examined using secondary ion mass spectrometry with varying the process variables and material parameters. It is observed that the diffusion profiles are severly impacted on the process parameters, such as the amount of Zn$_3$P$_2$ source and the diffusion time, as well as material parameters, such as doping concentration of diffusion layer. These results can be utilized for the high-speed avalanche photodiode fabrication.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.731-734
• /
• 2000

The characterization of Zinc diffusion processes applied fur high-speed avalanche photodiodes has been examined. The different diffusion process conditions for InP test structures were explored. The Zinc diffusion profiles, such as the diffusion depth and the Zinc dopant concentration, were examined using secondary ion mass spectrometry with varying the process variables and material parameters. It is observed that the diffusion profiles are severely impacted on the process parameters, such as the amount of Zn$_3$P$_2$source and the diffusion time, as well as material parameters, such as doping concentration of diffusion layer. These results can be utilized for the high-speed avalanche photodiode fabrication.

• 기술혁신연구
• /
• 제11권2호
• /
• pp.71-89
• /
• 2003

Since technological innovation, adoption, and diffusion is a fundamental engine for a company's competitiveness and in turn a nation's industrial development, diffusion of technological innovation has been one of popular research themes to many researchers and scholars for decades. Especially, in today's knowledge-based economy, the IT technology became a fundamental infrastructure for a nation and thus their impact on a nation's economy has grown to be tremendous. This paper investigates the patterns of technological diffusion of 16 telecommunications services. Firstly, we identify the optimal diffusion model which represents the 15 IT innovation best in terms of goodness-of-fit. Secondly, based on the best model identified we cluster the 16 IT innovations according to their diffusion characteristics such as penetration rate and diffusion speed. Lastly, we categorize the innovations in terms of technology (voice-based innovation and data-based innovation) and demand (household-use and business-use) attributes, and compare their diffusion patterns and found some meaningful difference in diffusion patterns. We hope the result helpful to corporate managers as well as policy makers in relevant areas.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2001년도 연료전지심포지움 2001논문집
• /
• pp.179-184
• /
• 2001

The diffusion layer within MEA(membrane electrode assembly) has been evaluated important factor for improvement of cell performance in DMFC. The diffusion layer in MEA structure leads to the reduction of catalyst loss in active catalysts layer as well as prevention of water-flooding in cathode. Cell performance is directly affected by interior properties of diffusion layer materials. Acetylene Black and $RuO_2$ with large pore size and low porosity compared to Vulcan XC-72R gave better performance caused by vigorous methanol diffusion and water removal. And $RuO_2$ as diffusion layer materials showed different behavior in anode and cathode compartment, that is, diffusion layers in anode and cathode side make methanol diffusion and water removal facilitate, respectively.

• Journal of applied mathematics & informatics
• /
• 제31권5_6호
• /
• pp.695-709
• /
• 2013

Calcium is well known role for signal transduction in a neuron cell. Various processes and parameters modulate the intracellular calcium signaling process. A number of experimental and theoretical attempts are reported in the literature for study of calcium signaling in neuron cells. But still the role of various processes, components and parameters involved in calcium signaling is still not well understood. In this paper an attempt has been made to develop two dimensional finite element model to study calcium diffusion in neuron cells. The JRyR, JSERCA and JLeak, the exogenous buffers like EGTA and BAPTA, and diffusion coefficients have been incorporated in the model. Appropriate boundary conditions have been framed. Triangular ring elements have been employed to discretized the region. The effect of these parameters on calcium diffusion has been studied with the help of numerical results.

• 한국자기공명학회논문지
• /
• 제16권2호
• /
• pp.122-132
• /
• 2012

The effects of the sample viscosity and volume on the convective flows induced by temperature gradient in PGSE-NMR self-diffusion measurements at high temperature have been investigated. The experimental results showed that the viscosity of the liquid sample strongly affects the magnitude of the convective flows as well as the diffusion coefficient itself. It was also found that the convective flows increase as the sample volume increase.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 춘계학술발표논문집
• /
• pp.319-324
• /
• 2009

Lately, knowledge-based society comes, it is important for enterprises to creatively utilize knowledge of technology for technological innovation. So, Technological innovation capacity of enterprises is important factor of business success. To improve technological innovation capacity, enterprises should well utilize their internal knowledges and external knowledges which come from technological diffusion. To well utilize external knowledges of enterprises they should well understand external knowledge flow. Especially knowledge flow also occurs frequently between nations, understanding of knowledge flow which occurs between nations is important to improve nation`s technological innovation capacity. So this paper presents comparison of technological innovation capacity and knowledge diffusion flow between nations.

• 공업화학
• /
• 제9권5호
• /
• pp.689-697
• /
• 1998

가교도와 희석제량을 변화시켜 제조한 인산기를 갖는 MR형 양이온 교환수지(RGP)에 대하여 우라늄의 흡착평형, 흡착속도 및 흡착 율속 단계를 고찰하였다. RGP 수지에 대한 우라늄의 흡착 평형은 가교도, 희석제량 및 흡착온도 변화 모두 Freundlich 등온식과 Langmuir 등온식으로 잘 나타났다. RGP수지에 대한 우라늄의 흡착량과 흡착속도는 흡착 온도가 증가함에 따라 증가하였으며 이때 흡착열은 ${\Delta}H=11kcal/mol$ 이었다. RGP 수지에 대한우라늄의 흡착속도는 가교도의 영향인 경우 RGP-10(50)>RGP-1(50)>RGP-2(50)>RGP-5(50)RGP-0(50)>이며, 희석제량의 영향인 경우 RGP-2(75)>RGP-2(100)>RGP-2(50)>RGP-2(30)>RGP-2(0) 순으로 증가하였다. RGP수지에 대한 우라늄의 확산저항은 분자확산<세공확산<표면확산 순이었으며, 수지내의 우라늄의 확산 율속은 세공 확산보다 표면 확산이 율속이었다.

• 한국안광학회지
• /
• 제16권4호
• /
• pp.403-408
• /
• 2011

목적: 확산법칙을 이용하여 착색렌즈에서의 농도분포와 확산깊이에 대한 연구를 하였다. 방법: Fick의 제2확산법칙을 바탕으로 유도된 이론적 맞춤곡선을 측정값에 맞춤한다. 결과: 맞춤곡선은 측정값과 매우 잘 일치하였으며, 그 결과로서 착색렌즈의 내부로 확산되어 들어간 단위면적당 착색용액의 질량과 착색시간 사이의 관계, 착색렌즈 내 착색염료에 대한 농도분포, 확산깊이 등을 평가할 수 있었다. 결론: 착색렌즈의 착색기전은 확산법칙으로 잘 설명될 수 있다.