• Journal of the Korean Society for Heat Treatment
• /
• v.27 no.6
• /
• pp.288-294
• /
• 2014

The study on the migration of carbon in T23/T91 dissimilar metal welds for the boiler was conducted at $600^{\circ}C$ with an increase of aging time from 1 to 100 hrs. Following results were obtained. The heavily etched dark band tended to increase from a molten boundary owing to an increase of aging time, which leads to form hard (T91) and soft (T23) zones with different hardness. It was found that carbon was migrated from T23 area to T91 area due to different carbon activities. In addition, soft and hard zones were formed in regional area mainly resulted from carbide dissolutions and precipitates.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.1
• /
• pp.125-134
• /
• 1988

The feasibility for improving the cooling rates and mechanical properties of wet welding process is experimentally investigated by using new developed underwater wet electrodes and H.T. steel plates. Main results of this experimental study can be summarized as follows; 1) By shielding around weld arc surrounding, the cooling rates resulting from wet welds with developed electrodes on TMCP steel plates can be lower than of non-shielded wet welds. 2)A high quality of mechanical properties of wet welds on TMCP steel plates can be obtained with shielded weld arc surrounding.

• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.111-118
• /
• 2006

Underwater wet arc welds were experimentally performed on 11mm thick KR-RA steel plate using six different types of flux coated electrodes of 4.0mm diameter, KSKR, KSKT, USBL, JPUW, UWEA and UWEB. From analysis of bead appearance, detachability of weld slag, spatter occurrence and arc stability, JPUW gives the best result, and UWEB is superior to KSKR and KSKT. By experimental result of hardness distribution on the weld bonds, UWEB weld has the narrowest bond structure which is probable condition to get the best mechanical properties of weld. UWEB and JPUW welds have more even hardness distribution across weld deposit and base metal. Upon polarization test to measure the respondency of corrosion, the electrode of UWEB shows the most excellent degree due to the low open circuit potential difference.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1697-1702
• /
• 2008

The objective of the review is to introduce the evaluation method of welding joint designs by using forces extracted from FE models. This evaluation method is currently being used for the Southeastern Pennsylvania Transportation Authority (SEPTA) project in the United States by request of the customer Engineer. The evaluation method was applied to critical joints connected by Fillet or Partial Joint Penetration (PJP) welds in car body structure for SEPTA project. The additional manual analysis is required based on the fact that Technical Specification in the United States requires the Contractor to apply Complete Joint Penetration (CJP) welds to all structural connections in Car body. However, in the car body design for Septa project there are some areas where CJP welds are not applied due to structural and manufacturing problems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.176-180
• /
• 1996

Continuous wave CO$_{2}$laser beam welding and formability of zinc coated steel shets were investigated. First, optimal welding condition could be obtained in but welding by using the data for heat input and welding velocity. The highest value of Erichsen test is 79.3% compare to that of base matel. Secondly, Formability of laser welds was investigated by using ball punch tester. Finally, the forming results of butt-welded sheets showed that the joing design was important to apply the laser welded blank in the automotive production.

• Proceedings of the KWS Conference
• /
• 1996.05a
• /
• pp.46-50
• /
• 1996

Continuous wave $CO_2$ laser beam welding and formability of zinc coated steel sheets were investigated. First, optimal welding condition could be obtained in butt welding by using the data for heat input and welding velocity. The highest value of Erichsen test is 79.3% compare to that of base metal. Secondly, Formability of laser welds was investigated by using ball punch tester. Finally, the forming results of butt-welded sheets showed that the joining design was important to apply the laser welded blank in the automotive production.

• Journal of Welding and Joining
• /
• v.14 no.3
• /
• pp.93-104
• /
• 1996

This study evaluated relative hot cracking susceptibility of commercial aluminum alloy welds, and then suggested possible mechanisms operated in the weld fusion zone and in the heat affected zone based on the observed cracking morphologies, fractography and microstructural features. The fusion zone solidification cracking was found to be mainly due to a microsegregation of Cu, Si, and Mg in grain boundaries, while liquation cracking in the HAZ was by the incipient melting of the segregated grain boundaries and the consitutional liquation of large aging precipitates and intermetallic compounds in the partially melted zone adjacent to the fusion line which experienced a rapid thermal excursion during welding.

• Proceedings of the KWS Conference
• /
• 2003.05a
• /
• pp.266-268
• /
• 2003

Residual stresses, which can be produced during the manufacturing process, play an important role in an industrial field. Residual stresses of structures by welding process are exerting negative effect on the fatigue behavior and safety of structure. Results from the elasto-plastic finite element analysis of the welds for a nuclear component, the residual stress distribution after welding. In this study, a finite element technique is developed to simulate the relaxation of the residual stresses due to the mechanical loads of welds.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.151-154
• /
• 2005

In this paper, we present a ultrasonic speckle suppression method for centrifugal-casted stainless steel sample by computer simulations of a flaw enhancement algorithm. Because of their practical importance in welds, the ultrasonic signal obtained from heat-affected zone or welds are investigated for computer simulation. The results for computer simulation present the more enhanced flaw-visibility and speckle suppression than the compared two techniques.

• Journal of Welding and Joining
• /
• v.20 no.5
• /
• pp.52-54
• /
• 2002

저온균열은, 대한용접학회에서 발간한 '용접.접합용어사전'에 의하면, '용접 후 용접부의 온도가 대체로 $200^{\circ}C$ 이하의 저온에서 발생하는 균열을 총칭한다. 경우에 따라서는 실온까지 냉각한 후 일정한 기간이 경과한 후에 발생하기도 하며, 이러한 균열을 지연균열(delayed cracking)이라고 한다'로 되어 있다. 이들 저온균열의 발생에는 주로 구속응력과 경화조직 및 확산성수소가 영향을 미치고 있으며, 그 종류는 위에서 언급한 지연균열 외에 라멜라 테어링, 변형균열, 칭균열형 저온균열 등이 있다. 본 기술강좌에서는 용접부의 저온균열에 대하여 지연균열과 그 외의 저온균열로 나누어 2회에 걸쳐 소개하기로 한다.하기로 한다.