• Water Engineering Research
• /
• v.6 no.2
• /
• pp.39-48
• /
• 2005

The Brazos River is one of the longest rivers contained entirely in the state of Texas, flowing over 700 miles from northwest Texas to the Gulf of Mexico. Today, the Brazos River Authority and Texas Commission on Environmental Quality interest in drought protection plan, waterpower project, and allowing the appropriation of water system-wide and water right within the Brazos River Basin to meet water needs of customers like farmers and local civilians in the future. Especially, this purpose of this paper primarily intended to provide the data for the engineering guidelines and make easily geological mapping tool. In the Brazos River basin, many stream-flow gage station sites are not working, and they can not provide stream-flow data sets enough for development of the Probable Maximum Flood (PMF) for use in the evaluation of proposed and existing dams and other impounding structures. Integrated GIS-Spatial Interpolation (GIS-SI) tool are composed of two parts; (1) extended GIS technique (new making interface for hydrological regionalization parameters plus classical GIS mapping skills), (2) Spatial Interpolation technique using weighting factors from kriging method. They are obtained from the relationship among location and elevation of geological watershed and existing stream-flow datasets. GIS-SI technique is easily used to compute parameters which get drainage areas, mean daily/monthly/annual precipitation, and weighted values. Also, they are independent variables of multiple linear regressions for simulation at un gaged stream-flow sites. In this study, GIS-SI technique is applied to the Brazos river basin in Texas. By assuming the ungaged flow at the sites of Palo Pinto, Bryan and Needville, the simulated daily/monthly/annual time series are compared with observed time series. The simulated daily/monthly/annual time series are highly correlated with and well fitted to the observed times series.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.10
• /
• pp.1698-1711
• /
• 2011

Knowledge is often represented as a set of rules or a semantic network in intelligent systems. Recently, ontology has been widely used to represent semantic knowledge, because it organizes thesaurus and hierarchal information between concepts in a particular domain. However, it is not easy to collect semantic relationships among concepts. Much time and expense are incurred in ontology construction. Collective intelligence can be a good alternative approach to solve these problems. In this paper, we propose a collective intelligence approach of Games With A Purpose (GWAP) to collect various semantic resources, such as words and word-senses. We detail how to construct the semantic information model or ontology from the collected semantic resources, constructing a system named FunWords. FunWords is a Korean lexical-based semantic resource collection tool. Experiments demonstrated the resources were grouped as common nouns, abstract nouns, adjective and neologism. Finally, we analyzed their characteristics, acquiring the semantic relationships noted above. Common nouns, with structural semantic relationships, such as hypernym and hyponym, are highlighted. Abstract nouns, with descriptive and characteristic semantic relationships, such as synonym and antonym are underlined. Adjectives, with such semantic relationships, as description and status, illustration - for example, color and sound - are expressed more. Last, neologism, with the semantic relationships, such as description and characteristics, are emphasized. Weighting the semantic relationships with these characteristics can help reduce time and cost, because it need not consider unnecessary or slightly related factors. This can improve the expressive power, such as readability, concentrating on the weighted characteristics. Our proposal to collect semantic resources from the collective intelligence approach of GWAP (our FunWords) and to weight their semantic relationship can help construct the semantic information model or ontology would be a more effective and expressive alternative.

• Journal of Broadcast Engineering
• /
• v.8 no.1
• /
• pp.91-100
• /
• 2003

In this paper, to improve the retrieval Performance, an efficient combination of the MPEG-7 visual descriptors, such as the edge histogram descriptor (EHD), the color layout descriptor (CLD), and the homogeneous texture descriptor (HTD), is proposed in the framework of the relevance feedback approach. The EHD represents spatial distribution of edges in local image regions and it is considered as an important feature to represent the content of the image. The CLD specifies spatial distribution of colors and is widely used in image retrieval due to its simplicity and fast operation speed. The HTD describes precise statistical distribution of the image texture. Both the feature vector for the query image and the weighting factors among the combined descriptors are adaptively determined during the relevance feedback. Experimental results show that the proposed method improves the retrieval performance significantly tot natural images.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.4
• /
• pp.255-265
• /
• 2007

In case of wavelet coefficients have correlation, in image signal denoising using wavelet shrinkage denoising method, the denoising effect for the image signal is reduced when the wavelet shrinkage denoising method is used. The coefficients of multiwavelet transform have correlation by pre-filters. To solve the degradation problem in multiwavelet transform, V Sterela suggested a new pre-filter for the Universal threshold or weighting factors to the threshold. In this paper, to improve the denoising effect in the multiwavelet transform, the coefficient normalizing method that the coefficient are divided by estimated noise deviation is adopted to the transformed multiwavelet coefficients in the course of wavelet shrinkage technique. And the thresholds of universal, SURE and GCV are estimated using normalized coefficients and tried to denoise by the wavelet shrinkage technique. We compared PSNRs of denoised images for each thresholds and confirmed the efficiency of the proposed method.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.5
• /
• pp.61-69
• /
• 2008

In general, it has been usually used the method that assess rock slope stability using stereographic projection method, limit equilibrium analysis, numerical analysis and slope stability evaluation table. Several methods for assessing the stability of rock slopes has been proposed on the basis of site investigation data. These method adopted different evaluation items and weighting factors by researchers, organization and nation. But the researches for each evaluation items were insufficient. So the effectiveness of rock slope stability evaluation items for geometrical configuration (slope height, slope direction and angle, dip and dip direction of major discontinuity, absolute value for the direction difference for slope and major discontinuities) and topographical characteristic (possibility of topographical water concentration, upper natural slope angle, slope configuration) using 315 failure and stable highway rock slope analysis data, AV (abnormal value) analysis and NMAV (normalized maximum abnormal value) analysis were evaluated.

• Imaging Science in Dentistry
• /
• v.38 no.1
• /
• pp.7-15
• /
• 2008

Purpose: This study provides comparative measurements of absorbed and effective doses for newly developed cone beam computed tomography (CT) in comparison with these doses for conventional CT. Materials and Methods: Thermoluminescent dosimeter rods (TLD rod: GR-200, Thermo Fisher Scientific Inc., Waltham, MA, USA) were placed at 25 sites throughout the layers of Male ART Head and Neck Phantom (Radiology Support Devices Inc., Long Beach, USA) for dosimetry. Implagraphy, DCT Pro (Vatech Co., Hwasung, Korea) units, SCT-6800TXL (Shimadzu Corp., Kyoto, Japan), and Crane x 3+(Soredex Orion Corp., Helsinki, Finland) were used for radiation exposures. Absorption doses were measured with Harshaw 3500TLD reader (Thermo Fisher Scientific Inc., Waltham, MA, USA). Radiation weighted doses and effective doses were measured and calculated by 2005 ICRP tissue weighting factors. Results: Absorbed doses in Rt. submandibular gland were 110.57 mGy for SCT 6800TXL (Implant), 24.56 mGy for SCT 6800TXL (3D), 22.39 mGy for Implagraphy 3, 7.19 mGy for DCT Pro, 5.96 mGy for Implagraphy 1, 0.70 mGy for Cranex 3+. Effective doses $(E_{2005draft)$ were 2.551 mSv for SCT 6800TXL (Implant), 1.272 mSv for SCT 6800TXL (3D), 0.598 mSv for Implagraphy 3, 0.428 mSv for DCT Pro and 0.146 mSv for Implagraphy 1. These are 108.6, 54.1, 25.5, 18.2 and 6.2 times greater than panoramic examination (Cranex 3+) doses (0.023mSv). Conclusion: Cone beam CT machines recently developed in Korea, showed lower effective doses than conventional CT. Cone beam CT provides a lower dose and cost alternative to conventional CT, promising to revolutionize the practice of oral and maxillofacial radiology.

• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.303-308
• /
• 2012

The Geant4 based Monte Carlo code for the application of stereotactic radiosurgery was developed. The probability density function and cumulative density function to determine the incident photon energy were calculated from pre-calculated energy spectrum for the linac by multiplying the weighting factors corresponding to the energy bins. The messenger class to transfer the various MLC fields generated by the planning system was used. The rotation matrix of rotateX and rotateY were used for simulating gantry and table rotation respectively. We construct accelerator world and phantom world in the main world coordinate to rotate accelerator and phantom world independently. We used dicomHandler class object to convert from the dicom binary file to the text file which contains the matrix number, pixel size, pixel's HU, bit size, padding value and high bits order. We reconstruct this class object to work fine. We also reconstruct the PrimaryGeneratorAction class to speed up the calculation time. because of the huge calculation time we discard search process of the ThitsMap and used direct access method from the first to the last element to produce the result files.

• Journal of Radiation Protection and Research
• /
• v.36 no.3
• /
• pp.154-159
• /
• 2011

To evaluate the radiation exposure of workers participating in task where high radiation exposure is expected, two-dosimeter is typically provided radiation workers, one on the chest and the other on the back, at Korean nuclear power plants (NPPs). In a previous study, the NCRP (55:50) algorithm was selected as the optimal two-dosimeter algorithm (TDA) with various field tests and this TDA has been applied to all Korean NPPs since 2006. In 2007, the International Commission on Radiological Protection (ICRP) published the new ICRP recommendation, ICRP 103, which provides the revised weighting factors for both radiation and tissues and the new reference phantom. In this study, the applicability of current NCRP (55:50) algorithm at Korean NPPs for ICRP 103 was analyzed. As a result, it was found that the NCRP (55:50) algorithm is still effective to estimate the effective dose of workers under ICRP 103.

• Journal of Korea Water Resources Association
• /
• v.39 no.12 s.173
• /
• pp.1067-1080
• /
• 2006

In empirical evaluations of public projects and public provided goods, MCDA(multicriteria decision-making analysis) has helped decision makers with an adequate policy decision-making tool since it allows taking into account a wide range of assessment criteria. As a tool for decision-making of conflict management, MCDA has demonstrated its usefulness in many public projects such as road, dam and harbor construction. In this study, to use this merit of MCDA, dam project assessment indicators from points of social, economic, environmental and practical views are developed based on sustainable development of water resources, and weighting factors are also estimated by means of questionnaire survey. In order to decide project investment rank, developed evaluation indicators are applied to 6 existing dams under investigation for a rehabilitation project. In addition to, it is recognized that the project practicability has become more important indicator as well as environmental and social issues. This is because cooperation and support from a local government and people are regarded as one of the most important problems in public projects recently.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.7
• /
• pp.1032-1038
• /
• 2017

Recently, regulation on carbon emissions has been strengthened according to the new climate change convention (COP21) held in Paris, and then Korea has decided to reduce CO2 emissions by 37% until 2030. As one of countermeasures, the government has energetically performed demonstration projects of island micro-grid including solar power, wind power and energy storage system. However, in order to smoothly introduce island micro-grid, it is a critical issue to carry out the economic evaluation for power utility aspect and independent power producer aspect. Therefore, this paper proposes economic evaluation algorithms of island micro-grid which are based on the present worth method, considering cost and benefit factors in the aspect of both sides. Firstly, in case of power utility this paper proposes algorithm to estimate a period of return on investment according to the introduction capacity of distributed generators replacing diesel generator. And also, in case of independent power producer, this paper proposes evaluation algorithm to estimate weighting factor of SMP and benefit rate based on break-even point related with cost and benefit. From a case study result on real island micro-grid model, it is confirmed that proposed algorithms are useful and practical for the economic evaluation of island micro-grid.