• The Research Journal of the Costume Culture
• /
• v.2 no.2
• /
• pp.385-394
• /
• 1994

Data of the body surface is a necessary unit for the measuring of metabolism energy and activity energy. And also, these data are referring to check the degree of retaining warmth of clothes, to find the effect of heat insulation according to body surface, to calculate an average temperature of skin, and to study the several fields of clothing. In measuring of body surface, it si actually impossible to measure a subject's body surface in each experiment. As the experimental method, both gypsum method, by which the shape of body an be copied as it is, and the weighting method from which planed body surface area can be measured with consistent thickness of polyprophylene film as used. In fact, every female subject feels uncomfortable to measure her body surface as a naked body. There, it is providing a simple, accurate regressive equation with weight & height as variable factors in this study. This equation is as=117.02W+77.31H-3344.94 with average error : 0.1%, absolute average error : 2.07%.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.159-163
• /
• 2004

The KNR(Korean National Railroad) has a speed limit regulation(130km/h) for the train passing the turnout to guarantee a safety. Since that speed is set as below the maximum commercial speed(140km/h), it has been regarded as a major factor to obstacle the total efficiency. The crossing rail part of the turnout system is formed into a antisymmetric, furthermore, there are several discontinuous part. Thus, measuring the strain signals of this part is impossible actually and it must be in the most difficult work related the turnout research. In this research, the program that can anticipate the signals at the various conditions with considering its own shape was developed and the preciousness of its results had been examined by comparing analyzed and measured ones at the other parts. The simulation was performed with varying the factors such as train speed and contact depth. As a results, it was proved that the regulation was not useless and very important guide at least up to now.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.9-11
• /
• 1995

In this paper, tile squirrel case induction motors required multi-objective function are designed. As the objective function of the optimization program, we select the linear combination of loss and mass of motors by using weighting factors. Optimization process is performed by using the evolution strategy (ES). ES is the algorithm that can find the global minimum. To verify validity of the proposed method, a sample design is tried.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1244-1254
• /
• 2015

This paper proposes a new method for tuning a linear quadratic - proportional integral derivative controller for second order systems to simultaneously meet the time and frequency domain design specifications. The suitable loop-shape of the controlled system and the desired step response are considered as specifications in the time and frequency domains, respectively. The weighting factors, Q and R of the LQ controller are determined by the algebraic Riccati equation with respect to the limiting behavior and target function matching. Numerical examples show the effectiveness of the proposed LQ-PID tuning method

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.2 s.245
• /
• pp.128-134
• /
• 2006

Topology optimization is an effective scheme to obtain the initial design concept: however, it is hard to apply in case of non-linear or multi-objective problems. In this study, a modified topology optimization method is proposed to generate a structure of a swing arm type actuator satisfying maximum compliance as well. as maximum stiffness using the multi-objective optimization. approach. The multi-objective function is defined to maximize the compliance in the direction of focusing of the actuator and the second eigen-frequency of the structure. The design of experiments are performed and the response surface functions are formulated to construct the multi-objective function. The weighting factors between conflicting functions are determined by the back-error propagation neural network and the solution of multi-objective function is acquired using the genetic algorithm.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.1 s.24
• /
• pp.99-108
• /
• 2006

In this paper, we analyzed the characteristics of emitter geolocation coverage area within which the emitter lies with a specified probability based on the LOBs(Line of Bearing) of sensors. Stansfield and MSD algorithms were applied to calculate BPE(Best Point Estimate), EEP(Elliptical Error Probable) and CEP(Circular Error Probable), They used the weighting factors composed of ${\sigma}_{Phi}$ (bearing error), QF(quality factor), $P_{e}$ (probability being inside) to optimize the performance. The characteristics of EEP was investigated in the change of them and those of CEP was analyzed based on the deployment of sensors.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.221-225
• /
• 2011

현재 그리고, 미래의 지속가능한 수자원 확보를 위해 수자원 계획 및 관리에 관한 제반 문제는 기술적인 측면과 사회적인 측면에서의 위험요소들에 대한 불확실성이 고려되어야 할 뿐만 아니라 이와 관련된 다양한 집단들의 이해관계도 상호작용하기 때문에 문제해결을 위한 다양한 기준과 내재적 갈등이 상존한다. 이에 본 연구는 농업용저수지의 연계운영 및 관리를 위한 다기준 의사결정시스템 구축을 하고자 하였으며 환경여건, 지형여건, 홍수위험도, 주민호응도, 용수수요량을 고려하여 농업용저수지의 연계운영에서 다수의 의사결정 요소들에 대한 가중치를 산출하였다. 이는 기존의 우선순위에 의한 용수배분이 최하순위의 용도나 지역에서 모든 물 부족분에 대한 위험을 부담하는데 반하여 의사결정 요소들의 상대적 가중치에 의한 용수배분은 전체 용도와 지역의 용수배분에 대한 위험이 분산되므로 보다 합리적인 것으로 판단된다.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.46-49
• /
• 2002

This paper presents I-PD controller design using LQR method in a two-inerita motor system to satisfy the design specification in time domain. And to provide a systematic LQ analysis for two-inerita motor system. The tuning parameters of LQ(I-PD) controller are determinated by the relationships between the design parameters of the overshoot and the settling time which are design specifications in time domain, and the weighting factors Q and R in LQR we can achieve the performance-robustness in time domain as well as the stability-robustness.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.24 no.1
• /
• pp.23-34
• /
• 2006

Color reproduction is one of the most important expression factors in digital printing. In this paper, an experiment was done where the characteristics of color reproduction in digital printing. The results could summarized as follows. The printing used device profile showed a color difference of less than printing used default value in digital printing. As a result of weighting color difference, a difference between color gamut of digital original and color gamut of printing, when transforming the RGB color space to CMY color space, a exclusion the gray revision. The solution is to optimize the color transformation by gamut mapping and gray revision.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.481-486
• /
• 1994

An image processing and pattern recognition program was developed in order to recognize the nummerinc displays on gas flow meters. the testing process of the accuracy of gas flow meters are to be automated, using the developed software. There are already many known pattern recognition algorithms for recognition of the letters. To upgrade the recognization accuracy, four different algorithms are applied in sequentially in the software. An calculation method to assign the weighting factors for the result of each algorithm was developed. It showed 98% accuracy by the pattern recognition of displaying numbers of gas mwters of 33 differnt types. This pattern recognition system is to be integrated in a industry.