• Journal of the Korean Society for information Management
• /
• 제16권2호
• /
• pp.49-80
• /
• 1999

This study analyses the researches on automatic query modification, expansion and combination based on search results of natural language queries and gives a conceptual framework for the factors affecting the effectiveness of the relevance feedback. The operating and experimental systems based on the vector space model, the binary independence model and the inference net model are reviewed, and it is found that the effectiveness of query expansion is affected by conceptual models, algorithms for weighting terms and documents and selecting query terms to be added, size of relevant and non-relevant documents to be used and size of terms to be added in relevance feedback, query length, type and size of DBs, etc.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.521-523
• /
• 1999

In this paper, we propose the hybrid fuzzy controller(HFC) and the hybrid auto-tuning algorithm. The proposed HFC combined a PID controller with a fuzzy controller concurrently produces the better output performance such as sensitivity improvement in steady state and robustness in transient state than any other controller. In addition, a hybrid auto-tuning algorithm which consists of genetic algorithm and complex algorithm to automatically generate weighting factor, scaling factors and PID control gains optimizes the output of HFC. As an typical example of non-linear system in control theory an inverted pendulum will be controlled by the suggested HFC and illustrated the performance and applicability of this proposed method by simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.512-517
• /
• 1994

The control system of a precise positioning mechanism with resonance and Coulomb friction has been designed using H$_{\infty}$ control theory, and the control performance has been verified by computer simulation and experimental analysis. The DGKF type H$_{\infty}$ control theory with scalar weighting factors was utilized for designing the control system. The followings have been confirmed from the present study: (1) The system with H$_{\infty}$ control presents better convergence and stability than the system with conventional control (PI-notch filter control). (2) The H$_{\infty}$ control system have good robustness properties for a wide range of operating conditions in the presence of external disturbances such as Coulomb friction and changing mechanical resonant frequency.ncy.

• Journal of architectural history
• /
• 제11권3호
• /
• pp.53-68
• /
• 2002

Since the 17th century, the finance for the government construction was demanded unlike the early chosun dynasty. It was consequent upon a transition in the supply method of materials and labors for the construction. The government construction being enforced in chronic financial difficulties had to undergo lack of funds. Especially, a rising construction cost by purchasing lots of materials including wood, and by employing labors weighted the difficulties. In order to put forward a construction, new and various efforts besides diversification in sources of finance ad been looked for. The efforts were driven in three parts which were to be the management of labor and materials, and the way of construction execution. As a result of spending a great effort to save cost, an extinguished improvement in the way of construction execution came out with 'Injungjeon-yeongkweon' in the year 1805.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제6권4호
• /
• pp.307-316
• /
• 2001

In this paper, the multiple output forward converter forPC power supply with weighted voltage mode control which improves the characteristics of DC and transient responses is analyzed and designed. The power stage model of this converter including all the major parasitic components is derived and the small signal model is also derived. Determination of the weighting factors and a design procedure for the loop compensation are presented. Finally, the proposed controller is verified through the simulation of three output forward converter with SABER, and the experiment.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• 제39권6호
• /
• pp.638-648
• /
• 1990

An effective resolved motion control method of redundant manipulators is proposed to minimize the energy consumption and to increase the dexterity while satisfying the physical actuator constraints. The method employs the neural optimization networks, where the computation of Jacobian matrix is not required. Specifically, end effector movement resulting from each joint differential motion is first separated into orthogonal and tangential components with respect to a given desired trajectory. Then the resolved motion is obtained by neural optimization networks in such a way that 1) linear combination of the orthogonal components should be null 2) linear combination of the tangential components should be the differential length of the desired trajectory, 3) differential joint motion limit is not violated, and 4) weighted sum of the square of each differential joint motion is minimized. Here the weighting factors are controlled by a newly defined joint dexterity measure as the ratio of the tangential and orthogonal components.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.706-708
• /
• 1999

In this study, a seesaw system is used as an example to demonstrate effectiveness of the control theory. This problem which keeps a seesaw's balance is corresponded to one of regulating problems. In this regard, a controller is designed by LQ techniques and an observer is implemented and applied to estimate states which cannot be actually measured in this system. And the genetic algorithm is utilized to systematically choose weighting factors in the given cost function. The performance of the controller is verified through the experiment results.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• 제34C권10호
• /
• pp.51-58
• /
• 1997

In this paper, a technique ot estimate center positions of the circular parts under noisy condition is presented. The circle chords are segmented from the circle with successively varying angle and weighted to reduce the center estimation errors effected by the orientations of the circle chords. The weighting factors for variable length chords are adaptively detemined according to the error contribution of each chord in center estimation. Robust estimation of the center positions of the circular parts are possible even though the edge informations are partially contaminated by the non-uniform lighting or the background textures. Computer simulations for several images which are obtained for same object under real environment y camera, show that the proposed techniqeu yields 1.85 and 2.77 of estimated error-distribution for center position and radius in mean square error, that the proposed has more robust estimation than those of the conventional methods.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• 제16권1호
• /
• pp.69-74
• /
• 2007

Topology optimization of the inner reinforcement for a vehicle's hood has been performed by evolutionary structural optimization(ESO) using a smoothing scheme. The purpose of this study is to obtain optimal topology of the inner reinforcement for a vehicle's hood considering the static stiffness of bending and torsion simultaneously. To do this, the multiobjective optimization technique was implemented. Optimal topologies were obtained by the ESO method. From several combinations of weighting factors, a Pareto-optimal solution was obtained. Also, a smoothing scheme was implemented to suppress the checkerboard pattern in the procedure of topology optimization. It is concluded that ESO method with a smoothing scheme is effectively applied to topology optimization of the inner reinforcement of a vehicle's hood considering the static stiffness of bending and torsion.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• 제24권5호
• /
• pp.548-552
• /
• 2015

In this paper, we describe the quadruped walking-control algorithm of the complete full-size humanoid DARPA Robotics Challenge-HUBO (DRC-HUBO) robot. Although DRC-HUBO is a biped robot, we require a quadruped walking function using two legs and two arms to overcome uneven terrains in the DRC. We design a wave-type quadruped walking pattern as a feedforward control using several walking parameters, and we design zero moment point (ZMP) controllers to maintain stable walking using an inverted pendulum model and an observed-state feedback control scheme. In particular, we propose a switching algorithm for ZMP controllers using supporting value and weighting factors in order to maintain the ZMP control performance during foot switching. Finally, we verify the proposed algorithm by performing quadruped walking experiments using DRC-HUBO.