• 한국대기환경학회지
• /
• 제32권5호
• /
• pp.513-525
• /
• 2016

To propose an effective ensemble methods in predicting $PM_{10}$ concentration, six experiments were designed by different ensemble average methods (e.g., non-weighted, single weighted, and cluster weighted methods). The single weighted method was calculated the weighted value using both multiple regression analysis and singular value decomposition and the cluster weighted method was estimated the weighted value based on temperature, relative humidity, and wind component using multiple regression analysis. The effects of ensemble average methods were significantly better in weighted average than non-weight. The results of ensemble experiments using weighted average methods were distinguished according to methods calculating the weighted value. The single weighted average method using multiple regression analysis showed the highest accuracy for hourly $PM_{10}$ concentration, and the cluster weighted average method based on relative humidity showed the highest accuracy for daily mean $PM_{10}$ concentration. However, the result of ensemble spread analysis showed better reliability in the single weighted average method than the cluster weighted average method based on relative humidity. Thus, the single weighted average method was the most effective method in this study case.

• 한국유체기계학회 논문집
• /
• 제11권1호
• /
• pp.52-60
• /
• 2008

Staggered dimples printed on opposite walls of an internal cooling channel are formulated numerically and optimized to enhance heat transfer performance. Nusselt number and friction factor based objectives are considered and a weighted average surrogate model is used to approximate the data generated by numerical simulation. The dimpled channel shape is defined by three geometric design variables, and the design point within design space are selected using Latin hypercube sampling. A weighted-sum method for multi-objective optimization is applied to integrate multiple objectives into a single objective. By the optimization, the objective function value is improved largely and heat transfer rate is increase much higher than pressure loss increase due to shape deformation. Channel with vertically non-symmetric optimum dimples is tested and found that the best appears if dimples on opposite wall are displaced by one quarter of dimple spacing.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2440-2443
• /
• 2008

This paper presents a three dimensional shape optimization procedure for a low-speed axial flow fan blade with a weighted average surrogate model. Reynolds-averaged Navier-Stokes equations with shear stress transport turbulence model are discretized by finite volume approximations. Six variables from airfoil profile and lean are selected as design variables. 3D RANS solver is used to evaluate the objective functions of total pressure efficiency. Surrogate approximation models for optimization have been employed to find the optimal design of fan blade. A search algorithm is used to find the optimal design in the design space from the constructed surrogate models for the objective function. The total pressure efficiency is increased by 0.31% with the weighted average surrogate model.

• Genomics & Informatics
• /
• 제14권4호
• /
• pp.173-180
• /
• 2016

The meta-analysis has become a widely used tool for many applications in bioinformatics, including genome-wide association studies. A commonly used approach for meta-analysis is the fixed effects model approach, for which there are two popular methods: the inverse variance-weighted average method and weighted sum of z-scores method. Although previous studies have shown that the two methods perform similarly, their characteristics and their relationship have not been thoroughly investigated. In this paper, we investigate the optimal characteristics of the two methods and show the connection between the two methods. We demonstrate that the each method is optimized for a unique goal, which gives us insight into the optimal weights for the weighted sum of z-scores method. We examine the connection between the two methods both analytically and empirically and show that their resulting statistics become equivalent under certain assumptions. Finally, we apply both methods to the Wellcome Trust Case Control Consortium data and demonstrate that the two methods can give distinct results in certain study designs.

• 한국정보시스템학회지:정보시스템연구
• /
• 제25권2호
• /
• pp.153-171
• /
• 2016

Purpose This study suggests the development of forecasting model for local cable TV advertisement. In order to verify the expected effect of the suggestion, using the causal loop map of System Dynamics, the factors affecting the prospects of cable TV commercial market were divided into 5 groups. Then targeting 97 people involved in the cable TV commercial market in Busan, Ulsan, and Gyeongnam, a survey was conducted on their perception of the current status of local advertisement market and future prospect. Design/methodology/approach The analysis of the collected data shows that workers in advertising and advertisers perceive the influence of cable TV as an advertising media to be high, while clearly understanding the problems of cable TV commercial market. Based on this the effects on the prospects of cable TV commercial market were analyzed and a forecasting method called Weighted Moving Average was applied. In order to improve accuracy of the added value of Weighted Moving Average, the 5 factors were divided into qualitative factors and quantitative factors, and using Multi-attribute Decision Making method, all the factors were normalized and weighting factors were deduced. The result of simulating the prospects of cable TV commercial market using Weighted Moving Average, both qualitative and quantitative factors showed downward turn in the market prospect for the following 10 years. Findings The result reflects generally negative perception of advertisement viewers about the prospects of cable TV commercial market. Compared to the previous studies on domestic cable TV commercials that focused on policy suggestions and surveys on perception of current status, this study has its significance in that it used scientific method and simulation for verification.

• 한국대기환경학회지
• /
• 제17권3호
• /
• pp.251-258
• /
• 2001

Indoor and outdoor nitrogen dioxide(NO$_2$) concentrations of 122 houses were measured and compared with measurements of personal NO$_2$ exposure simultaneously . Time activity patterns were used to determine the impacts on NO$_2$ exposure assessment and time weighed average model to estimate the personal NO$_2$ exposure. Most people spent their times more than 80% of indoor and more than 50% in home, respectively. Personal NO$_2$ esposure was found to be significantly associated with both indoor NO$_2$ concentration(r=0.70) and outdoor NO$_2$ concentration (r=0.68). Using time weighted average model, personal NO$_2$ exposure was estimated with NO$_2$ measurements in indoor home, indoor workplace and outdoor home. The estimated NO$_2$ measurements were significantly correlated with measured personal exposures(r=0.69, N=122). For the difference between measured and estimated NO$_2$ exposures by multiple regression analysis showed that NO$_2$ concentrations in near workplace and other outdoors of no NO$_2$ measurements affected the personal NO$_2$ exposures(p=0.023).

• 한국환경보건학회지
• /
• 제33권5호
• /
• pp.359-364
• /
• 2007

The aim of this study were to assess the personal exposure to volatile organic compounds (VOCs) and to estimate the personal exposure using time-weighted average model. Three target VOCs (benzene, toluene, xylene) were analyzed in personal exposure samples and residential indoor, residential outdoor and workplace indoor microenvironments samples in the iron mill 30 workers during working 5 days. Personal exposure to VOCs significantly correlated with workplace concentration p<0.05), suggesting workplace had strong source and major contribution to personal exposure. Personal exposure could be estimated with time activity pattern and time weighted average (TWA) model of residential indoor and workplace concentrations measured. Time weighted mean microenvironments concentrations were close approximately of personal exposure concentrations. Total exposure for participants can be estimated by TWA with microenvironments measurements and time activity pattern.

• Communications for Statistical Applications and Methods
• /
• 제19권3호
• /
• pp.367-379
• /
• 2012

야구경기에서 순위를 예측하는 것은 야구팬들에게 관심의 대상이 된다. 이러한 순위를 예측하기 위해서 2011년 한국프로야구 기록 자료를 바탕으로 산술평균방법, 가중평균방법, 주성분분석방법, 주성분회귀분석 방법을 제시한다. 표준화를 통한 산술평균, 상관계수를 이용한 가중평균과 주성분 분석을 이용해서 순위를 예측하고, 최종모형으로 주성분회귀분석 모형이 선택되었다. 주성분 분석으로 축약된 변수를 이용해서 회귀분석을 실시하여, 투수부분, 타자부분, 투수와 타자부분의 순위예측 모형을 제안한다. 예측된 회귀모형을 통해서 2012년도 순위 예측이 가능하다.

• Water Engineering Research
• /
• 제5권2호
• /
• pp.55-68
• /
• 2004

The GLEAMS (Groundwater Loading Effects of Agricultural Management System, version 3.0) water quality model was used to predict hydrology and water quality and to evaluate the effects of soil types from a cattle-grazed pasture field of Bermuda-Rye grass rotation with poultry litter application as a fertilizer in North Alabama. The model was applied and evaluated by using four years (1999-2002) of field-measured data to compare the simulated results for the 2.71- ha Summerford watershed. $R^2$ values between observed and simulated runoff, sediment yields, TN, and TP were 0.91, 0.86, 0.95, and 0.69, respectively. EI (Efficiency Index) of these parameters were 0.86, 0.67, 0.70, and 0.48, respectively. The statistical parameters indicated that GLEAMS provided a reasonable estimation of the runoff, sediment yield, and nutrient losses at the studied watershed. The soil infiltration rates were compared with the rainfall events. Only high intensity rainfall events generated runoff from the watershed. The measured and predicted infiltration rates were higher during dry soil conditions than wet soil conditions. The ratio of runoff to precipitation was ranging from 2.2% to 8.8% with average of 4.3%. This shows that the project site had high infiltration and evapotranspiration which generated the low runoff. The ratio of runoff to precipitation according to soil types by the GLEAMS model appeared that Sa (Sequatchie fine sandy loam) soil type was higher and Wc (Waynesboro fine sandy loam, severely eroded rolling phase) soil type relatively lower than the weighted average of the soil types in the watershed. The model under-predicted runoff, sediment yields, TN, and TP in Wb (Waynesboro fine sandy loam, eroded undulating phase) and Wc soil types. General tendency of the predicted data was similar for all soil types. The model predicted the highest runoff in Sa soil type by 105% of the weighted average and the lowest runoff in Wc soil type by 87% of the weighted average

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권3호
• /
• pp.1377-1389
• /
• 2016

This paper presents a target model update scheme for the mean-shift tracking with background weighted histogram. In the scheme, the target candidate histogram is corrected by considering the back-projection weight of each pixel in the kernel after the best target candidate in the current frame image is chosen. In each frame, the target model is updated by the weighted average of the current target model and the corrected target candidate. We compared our target model update scheme with the previous ones by applying several test sequences. The experimental results showed that the object tracking accuracy was greatly improved by using the proposed scheme.