• The Journal of Korean Association of Computer Education
• /
• v.8 no.6
• /
• pp.103-111
• /
• 2005

This paper presents a novel automated threshold-decision algorithm that uses the mean and standard-deviation values obtained from the difference values of consecutive frames. At first, the calculation of difference values is obtained by the weighted ${\chi}^2$-test algorithm which was modified by joining color histogram to ${\chi}^2$-test algorithm. The weighted ${\chi}^2$-test algorithm can subdivide the difference values by imposing weights according to NTSC standard. In the first step, the proposed automatic threshold-decision algorithm calculates the mean and standard-deviation value from the total difference values, and then subtracts the mean value from the each difference values. In the next step, the same process is performed on the remained difference values, and lastly, the threshold is detected from the mean when the standard deviation has a maximum value. The proposed method is tested on various video sources and, in the experimental results, it is shown that the proposed method efficiently estimates the thresholds and reliably detects scene changes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8A
• /
• pp.679-688
• /
• 2012

In this paper, performance improved hole-filling algorithm including boundary noise removing pre-process which can be used for an arbitrary view synthesis with given two views is proposed. Boundary noise usually occurs because of the boundary mismatch between the reference image and depth map and common-hole is defined as the occluded region. These boundary noise and common-hole created while synthesizing a virtual view result in some defects and they are usually very difficult to be completely recovered by using only given two images as references. The spiral weighted average algorithm gives a clear boundary of each object by using depth information and the gradient searching algorithm is able to preserve details. In this paper, we combine these two algorithms by using a weighting factor ${\alpha}$ to reflect the strong point of each algorithm effectively in the virtual view synthesis process. The experimental results show that the proposed algorithm performs much better than conventional algorithms.

• Journal of the Korean Society of School Health
• /
• v.10 no.2
• /
• pp.169-178
• /
• 1997

In order to investigate the complaint rates of subjective fatigue symptoms and study the relationship between them and body type, health awareness in middle school students, we carried out a survey of 1,209 students (654 boy students and 555 girl students) at a middle school in Taejon City by a self-recorded questionnaire. The survey was conducted in June, 1997. The results obtained were as follows: 1. Among complaints of fatigue, "feel like lying down" was the highest, followed by "feel anxious about things", "feel drowsy", "yawning a lot", "eye strain" and "whole body feels tired" in descending order. 2. In the average weighted score of fatigue complaint, dullness and sleepiness (I) was the highest, followed by a difficulty in concentration (II) and bodily projection of fatigue (III) in descending order. Fatigue seems to create mental stress rather than physical burdens. 3. In the classification of body type based on the $R\ddot{o}hrer$ index, the obesity type (145 and above) was 11.0%, standard type (110~144) was 64.7% and leptosomic type (l09 and below) was 24.3%. Comparison between both sexes revealed that the rate of obesity and leptosomic types were significantly higher in boy students than in girl students. 4. In terms body type awareness, the statistics are the following: those who consider themselves to be standard type, 44.3%, slightly obese 24.5%, leptosomic, 23.5% and obese 7.8%. However, the level of obesity awareness was significantly higher in girl students than in boy students. 5. As for health awareness, 36.5% considered themselves healthy, 5.4% generally healthy and 10.1% a little unhealthy, but the level of unhealthy awareness was higher in girl students than in boy students. 6. In the relationship between body type and health awareness, most students thought that they were obese in spite of their standard body type. Also, many students who were obese and leptosomic tended to consider themselves to be a little unhealthy. 7. The more the students were obese or felt unhealthy, the more the average weighted score of fatigue complaints was high.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.9
• /
• pp.739-744
• /
• 2014

Space exploration project usually consists of so many fields of sub projects that it has a diverse ripple effect throughout the economy. Further studies could not consider the complexity of the space exploration project because they regarded it as one project in spite of the diversity. This study found a way to consider complexity of space exploration project using the concept of WAC(weighted average coefficient). The moon exploration project (2014~2020) is the subject of this study. We classified the moon exploration project into 8 industries and calculated the WAC of production inducement coefficient, value added inducement coefficient, and employment inducement coefficient. The result of analysis using these WACs is that production inducement effect amounts to 1,229.6 billion won, value added inducement effect 324.6 billion won, employment inducement effect 4,844 men. And the linkage effect analysis shows that moon exploration project has more backward linkage effect than forward linkage effect.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.565-573
• /
• 2008

This paper proposes noise reduction methods to improve the channel estimation performance in Equalization On-Channel Repeater (E-OCR) for Terrestrial-Digital Multimedia Broadcasting (T-DMB) system. In the E-OCR for T-DMB system, the channel estimation is performed by the pilot signal extraction and the channel coefficient estimation. Since the performance of the channel estimation highly depends on the estimated channel coefficients whose accuracy is associated with the received signal-to-noise ratio (SNR), it is important to reduce noise existing at the estimated channel coefficients. To reduce such noise components, various noise reduction methods of the estimated channel coefficients based on the M -point weighted moving average are proposed. Computer simulations show that the proposed methods improve the estimation performance by more than 2 to 3 dB in terms of the symbol error rate after equalization.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.39-43
• /
• 2007

In high speed communication networks, the determination of a transmission rate is critical for the stability of a closed-loop network system with the congestion control scheme. In ATM networks, the available bit rate (ABR) service is based on a feedback mechanism, i.e., the network status is transferred to the ABR source by a resource management (RM) cell. RM cells contain the traffic information of the downstream nodes for the traffic rate control. However, the traffic status of the downstream nodes can not be directly transferred to the source node in the IP based networks. In this paper, a new rate-based congestion control scheme using an exponential weighted moving average algorithm is proposed to build an efficient feedback control law for congestion avoidance in high speed communication networks. The proposed congestion control scheme assures the stability of switch buffers and higher link utilization of the network. Moreover, we note that the proposed congestion scheme can flexibly work along with the increasing number of input sources in the network, which results in an improved scalability.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.147-153
• /
• 2017

The mortality rate in industrial accidents in South Korea was 11 per 100,000 workers in 2015. It's five times higher than the OECD average. Economic losses due to industrial accidents continue to grow, reaching 19 trillion won much more than natural disaster losses equivalent to 1.1 trillion won. It requires fundamental changes according to industrial safety management. In this study, We classified the risk of accidents in industrial complex of Ulju-gun using spatial analytics and data mining. We collected 119 data on accident data, factory characteristics data, company information such as sales amount, capital stock, building information, weather information, official land price, etc. Through the pre-processing and data convergence process, the analysis dataset was constructed. Then we conducted geographically weighted regression with spatial factors affecting fire incidents and calculated the risk of fire accidents with analytical model for combining Boosting and CART (Classification and Regression Tree). We drew the main factors that affect the fire accident. The drawn main factors are deterioration of buildings, capital stock, employee number, officially assessed land price and height of building. Finally the predicted accident rates were divided into four class (risk category-alert, hazard, caution, and attention) with Jenks Natural Breaks Classification. It is divided by seeking to minimize each class's average deviation from the class mean, while maximizing each class's deviation from the means of the other groups. As the analysis results were also visualized on maps, the danger zone can be intuitively checked. It is judged to be available in different policy decisions for different types, such as those used by different types of risk ratings.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.6
• /
• pp.1171-1180
• /
• 2010

It is well known that the asymptotic convergence rates of nonparametric regression estimator gets worse as the dimension of covariates gets larger. One possible way to overcome this problem is reducing the dimension of covariates by using single index models. Two coefficient estimation methods in single index models are introduced. One is semiparametric least square estimation method, which tries to find approximate solution by using iterative computation. The other one is weighted average derivative estimation method, which is non-iterative method. Both of these methods offer the parametric convergence rate to normal distribution. However, practical comparison of these two methods has not been done yet. In this article, we compare these methods by examining the variances of estimators in various models.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.8
• /
• pp.763-771
• /
• 2011

An optimization procedure for the design of a ventilation axial-flow fan is presented in this paper. Flow analyses of the preliminary fan are performed by solving three-dimensional Reynolds-averaged Navier-Stokes equations via a finite-volume solver with the shear-stress transport turbulence model as a turbulence closure. Three variables, the hub-to-tip ratio and the stagger angles at the mid and tip spans, are selected for the optimization. The Latin-hypercube sampling method as a design-of-experiments technique is used to generate twenty-five design points within the design space. and the weighted average surrogate models, WTA1, WTA2, and WTA3, are applied for find optimal designs. The results show that the efficiency is considerably enhanced.

• Korean Journal of Agricultural Science
• /
• v.41 no.3
• /
• pp.169-175
• /
• 2014

Objective of this study was to investigate effects of pre-processing method and number of sampling leaves on stability of the reflectance measurement for Chinese cabbage and kale leaves. Chinese cabbage and kale were transplanted and cultivated in a plant factory. Leaf samples of the kale and cabbage were collected at 4 weeks after transplanting of the seedlings. Spectra data were collected with an UV/VIS/NIR spectrometer in the wavelength region from 190 to 1130 nm. All leaves (mature and young leaves) were measured on 9 and 12 points in the blade part in the upper area for kale and cabbage leaves, respectively. To reduce the spectral noise, the raw spectral data were preprocessed by different methods: i) moving average, ii) Savitzky-Golay filter, iii) local regression using weighted linear least squares and a $1^{st}$ degree polynomial model (lowess), iv) local regression using weighted linear least squares and a $2^{nd}$ degree polynomial model (loess), v) a robust version of 'lowess', vi) a robust version of 'loess', with 7, 11, 15 smoothing points. Effects of number of sampling leaves were investigated by reflectance difference (RD) and cross-correlation (CC) methods. Results indicated that the contribution of the spectral data collected at 4 sampling leaves were good for both of the crops for reflectance measurement that does not change stability of measurement much. Furthermore, moving average method with 11 smoothing points was believed to provide reliable pre-processed data for further analysis.