• Korean journal of food and cookery science
• /
• v.30 no.4
• /
• pp.454-462
• /
• 2014

This study aimed at the optimization and development of rice snack by response surface methodology (RSM). The effect of rice soaking time and additional ratio of soybean milk on physicochemical properties and sensory evaluation of dried rice flour for non-fried snack was studied. After soaking for 0 to 12 days, Baekjinju rice was milled and then air-dried. A quadratic model was selected for weight, volume, hardness, taste and appearance. Two-factor interaction model was selected for expansibility, color and overall preference. A linear model was selected for yellowness and flavor. Weight, hardness and appearance were increased and decreased thereafter as rice soaking time increased, but the volume was reversed. Expansibility, color, taste and flavor were decreased as rice soaking time increased, but yellowness was reversed. Weight and overall preference decreased as additional ratio of soybean milk increased, but volume, expansibility and yellowness were reversed. Hardness, taste and appearance were increased after initial decrease as additional ratio of soybean milk increased, color and flavor were not changed by additional ratio of soybean milk. The optimum conditions of each factor were set to where the rice soaking time and additional ratio of soybean milk were at their minimum. Weight, volume, expansibility, yellowness, hardness, color, taste, flavor, appearance and overall preference were established at maximum level where the objective of the optimum was in level. Our data indicated the statistically predicted values of the highest desirability was 1.24 day of rice soaking time and 15.80% of additional ratio of soybean milk.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.8
• /
• pp.1172-1180
• /
• 2013

Two experiments were conducted to determine the standardized ileal digestible (SID) lysine (Lys) requirement and the ideal SID threonine (Thr) to Lys ratio for finishing barrows. In Exp. 1, 120 barrows with an average body weight of $72.8{\pm}3.6$ kg were allotted to one of six dietary treatments in a randomized complete block design conducted for 35 d. Each diet was fed to five pens of pigs containing four barrows. A normal crude protein (CP) diet providing 15.3% CP and 0.71% SID Lys and five low CP diets providing 12% CP with SID Lys concentrations of 0.51, 0.61, 0.71, 0.81 and 0.91% were formulated. Increasing the SID Lys content of the diet resulted in an increase in weight gain (linear effect p = 0.04 and quadratic effect p = 0.08) and an improvement in feed conversion ratio (FCR) (linear effect p = 0.02 and quadratic effect p = 0.02). For weight gain and FCR, the estimated SID Lys requirement of finishing barrows were 0.71 and 0.71% (linear broken-line analysis), 0.79 and 0.78% (quadratic analysis), respectively. Exp. 2 was a 26 d dose-response study using SID Thr to Lys ratios of 0.56, 0.61, 0.67, 0.72 and 0.77. A total of 138 barrows weighing $72.5{\pm}4.4$ kg were randomly allotted to receive one of the five diets. All diets were formulated to contain 0.61% SID Lys (10.5% CP), which is slightly lower than the pig's requirement. Weight gain was quadratically (p = 0.03) affected by SID Thr to Lys ratio while FCR was linearly improved (p = 0.02). The SID Thr to Lys ratios for maximal weight gain and minimal FCR and serum urea nitrogen (SUN) were 0.67, 0.71 and 0.64 using a linear broken-line model and 0.68, 0.78 and 0.70 using a quadratic model, respectively. Based on the estimates obtained from the broken-line and quadratic analysis, we concluded that the dietary SID Lys requirement for both maximum weight gain and minimum FCR was 0.75%, and an optimum SID Thr to Lys ratio was 0.68 to maximize weight gain, 0.75 to optimize FCR and 0.67 to minimize SUN for finishing barrows.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.3
• /
• pp.243-250
• /
• 2004

Two cultivars which are glutinous (Hawcheongchalbyeo) and non-glutinous (Hawcheongbyeo) near isogenic line of rice, were used for this study. The objective of this experiment was to gain the basic information for increasing grain yield of waxy rice by means of source and sink size control. In both Hwacheongbyeo and Hawcheongchalbyeo, the trend of decrease in total and average spikelet weight was ranked as follows; removal of penultimate leaf＜ removal of flag leaf＜ removal of flag leaf and 3ya leaf from the top ＜ removal of flag leaf and penultimate leaf ＜ removal of flag leaf, penultimate leaf, and 3rd leaf from the top. The reduction yale of total and average spikelet weight per panicle of Hwacheongbyeo was higher than those of Hwacheongchalbyeo according to the removal of flag leaf, penultimate leaf, and 3rd leaf from the top. In both cultivars, high-density grain ratio and grain filling ratio of the primary branches were higher Hun those of the secondary branches by leaf clipping treatment. The spikelet number and total spikelet weight per pinicle in both Hwacheongbyeo and Hwacheongchalbyeo were decreased by removal of spikelets on branches compared with control, whereas average spikelet weight and grain filling ratio were increased. The increase rate of average spikelet weight of Hwacheongchalbyeo was much higher than that of Hwacheongbyeo by sink size control. High-density grain ratio by removal of spikelets on branches was higher in Hwacheongchalbyeo, but filled grain ratio was higher in Hwacheongbyeo.

• Journal of Periodontal and Implant Science
• /
• v.42 no.6
• /
• pp.212-216
• /
• 2012

Purpose: The aim of this study was to evaluate the relationship between maternal periodontal disease and the health status of newborns using Apgar scores. Methods: One hundred pregnant women with periodontal disease were included in the case series and 100 pregnant women without periodontal disease were placed in the control group, respectively. The periodontal parameters of bleeding on probing (BOP), clinical attachment loss (CAL), probing depth (PD), birth weight, and Apgar scores were recorded in both groups. T-tests and Pearson's correlation coefficient were used to determine the birth weight odds ratio to analyze the relationship between the periodontal parameters of BOP, CAL, and PD on the one hand and an Apgar score of less than 7. An unpaired Student's t-test was used to analyze differences in means between the case and control groups using SPSS ver. 13. Results: The means of the ages, periodontal pocket depths, attachment loss, areas with BOP, Apgar score in the first 5 minutes and infant birth weight exhibited statistically significant differences between the case and control groups. The ratio of an Apgar score of <7 to periodontal disease was 3.14; the ratio of low birth weight risk in mothers with periodontal disease to that in mothers without periodontal disease was 2.74. Pearson's correlation coefficient revealed a significant correlation between the infant birth weight and BOP, CAL, and PD of the mother. In addition, there was a significant correlation between the Apgar score and BOP, CAL, and PD and also between the Apgar score and infant birth weight. Conclusions: The results of this study showed a significant relationship between periodontal disease and infant birth weight; in addition, there was a significant relationship between the periodontal indexes of BOP, CAL, and PD on the one hand and the Apgar score on the other.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.2
• /
• pp.255-260
• /
• 1994

Calving records of 107 heifers from two breed groups were used to identify the major factors contributing to calving difficulty (dystocia) and compare the influence of pelvic diameters, weight and height of heifers measured after breeding and before calving on dystocia. The horizontal and vertical pelvic diameters, hip height and weight of heifers were measured two months after breeding and again two months before calving. Snell transformed calving difficulty scores (0 = normal to 100 = surgical intervention) were used in analyzing the data by analysis of covariance. Body condition score of the heifer, sire birth weight of the calf, birth weight of the calf, and ratio of calf birth weight to pelvic area all had significant effects on dystocia. Calf birth weight, ratio of calf birth weight to pelvic area, and heifer's condition score were especially important. However, sex of calf did not have a significant influence on dystocia. Generally, the variables measured before calving accounted for a higher proportion of variation in dystocia than those measured after breeding. Thus, based on the relative importance of the major factors affecting dystocia, it is suggested that selection of bulls with low birth weight for breeding on normal size heifers with optimum body condition score, and well developed pelvic opening, would be effective in reducing the incidence and severity of dystocia in beef heifers.

• Journal of Korean Biological Nursing Science
• /
• v.10 no.1
• /
• pp.19-24
• /
• 2008

Purpose: The purpose of this study was to identify the factors that influence on the weight control diet experience of the female nursing students in an university. Method: The data were collected by measuring weight, height, body mass index (BMI), waist and hip circumferences, and body satisfaction. The subjects of this research were 119 nursing students of K University in Kangwondo. And the mean age of the subjects was 20.38. Result: 67.7% of subjects had an weight control diet experience. The mean BMI of the subjects was $21.39\;kg/m^2$. There were lower BMI and higher waist/hip ratio in the weight control diet experience group. There were significant correlations between body satisfaction and BMI, waist/ hip ratio. The factor that influenced significantly on weight control diet experience was BMI. Conclusion: It is necessary to develop an educational program for reducing the risk factors due to an inadequate weight control diet for female nursing students in university.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.4
• /
• pp.207-210
• /
• 2008

It is very important factors to control optimal light transmission ratio and soil moisture content in order to produce good quality of ginseng seedling. To study the effect of light transmission ratio (LTR) and soil moisture content(SMC) on growth characteristics and yield of ginseng seedling, LTR was controlled by three level such as 21.2, 24.8% and 30.3%, and SMC was plotted by four level of 11.0%, 12.5%, 15.3% and 18.9% at the greenhouse. Chlorophyll content was gradually decreased in the low LTR (21.2%), while it was distinctly decreased by the decrease of SMC in excessively high LTR (30.3%). The decrease of SMC in the high LTR increased heat injury ratio distinctly, while heat injury ratio in the low LTR was only increased when SMC was very low such as 11.0%. All of fresh root weight per Kan (3.3$m^2$), root weight per plant, and the number of usable seedling were distinctly decreased by the increase of LTR and the decrease of SMC. Excessive increase of LTR in optimal SMC (18.9%) hadn't a great effect on the decrease of root weight, while root weight in low SMC was distinctly decreased by the increase of LTR. Ratio of rusty root was distinctly increased in the condition that both of LTR and SMC were high. Ratio of rusty root in the excessively high LTR was gradually fallen off by decrease of SMC, but its ratio in low SMC didn't changed distinctly by the decrease of SMC.

• Journal of Preventive Medicine and Public Health
• /
• v.17 no.1
• /
• pp.251-257
• /
• 1984

Low birth weight baby, defined as the baby born with less than or equal to 2,500g of body weight by WHO has been a great concern in the fold of maternal and child health since the low birth weight is a major cause of high perinatal mortality. Any measure to prevent the low birth weight baby is most desirable not only for saving the life of a baby but also for levelling up the health of the whole society. The authors attempted to figure out how some known maternal risk factors are related to the low birth weight and to measure their strengh of associations in terms of relative risk using hospital birth records. For this study, hospital birth records of 66 low birth weight cases and sex-parity matched 198 normal controls were chosen from Kangnam St. Mary's Hospital, Catholic Medical Center, and the data were analyzed in regards to several maternal factors. The risk factors studied were mother's age, mother's ABO blood type, previous histories of abortion, low birth weight baby, fetal wastage, and maternal diseases represented by anemia, hypertension, proteinuria, and glucosuria. The results obtained in this study were as follows: 1. The mean body weight of the cases and controls were 1,955g and 3,251g, respectively, and the heights were 41cm for cases and 50cm for controls. Mean gestation periods of cases and controls were 34 weeks and 39 weeks, respectively. 2. Young mother(less than or equal to 20 years of age) or old mother(more than or equal to 30 years of age) experienced more frequently the delivery of low birth weight babies than mothers in between 21 and 29 years of age. But the difference was not statistically significant. 3. Mothers whose blood type was O tended to have slighty higher frequency of low birth weight babies while B mothers have lower frequency. But the difference was not statistically significant too. 4. Those mothers who had experienced low birth weight baby in the past tended to give more births of low birth weight babies. This factor is even statistically significant and the relative risk of the prior experience of low birth weight was 6.7. 5. Mothers with experience of fetal losses and mothers of more than two pregnancies had higher frequency of low birth weight than the mothers with no fatal losses and of first pregnancy, but the difference was not statistically significant. 6. Statistically significant higher frequency of low birth weight were found in mothers with hypertension(odds ratio=4.07), anemia(odds ratio=22,33), and proteinuria(odds ratio=2.79). In summary, these study results strongly suggest that in order to prevent the low birth weight, special care should be made when the mother is too young or too old, and when the mother has experienced deliveries of low birth weight and fetal deaths. Medical control for the maternal diseases such as anemia and hypertension is also needed before or during the pregnency.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.11 s.188
• /
• pp.103-107
• /
• 2006

It is well-known that the mechanical properties of MMT(montmorillonite) nanocomposites are better than those of conventional composites. In this study, tensile tests were performed to determine the effect of silane modification of MMT and its weight ratio on the tensile properties of MMT/epoxy nanocomposites. It was found that the tensile strength and the elastic modulus of MMT/epoxy nanocomposites increased with increasing weight ratio of MMT. The elastic modulus of silane-modified MMT/epoxy nanocomposites was higher than that of untreated MMT/epoxy nanocomposites, irrespective of weight ratio.

• Journal of the Korean Home Economics Association
• /
• v.27 no.1
• /
• pp.1-8
• /
• 1989

In order to investigate the mechanical properties such as tensile, bending, shearing, thickness and weight of the wool fabrics were measured by KES-F system. Samples were classified into blend ratio, weave type, fabric count. Blend ratio was classified into two groups, which are P/W blended fabric (p=63~65%, w=35~37%) and all wool fabric. Weave type was classified into four groups, which are plain, 3 harness twill, 4harness twill, satin. Cloth count was classified into three groups, which are loose, medium, tight. Statistical analysis was performed using T-test, F-test. The results were as follows; 1. There was significant difference in the thickness, tensile, bending, shearing according to the blend ratio. 2. According the weave, there was significant difference in the bending, weight and thickness in the P/W blended fabrics. There was significant difference in the tensile, weight, thickness, bending, shearing, shearing hysterisis (2HG) in the all wool fabrics. 3. There was significant difference in the shearing properties according to the fabric count.