• 한국임상약학회지
• /
• 제9권1호
• /
• pp.15-18
• /
• 1999

Ascertainment of accurate pharmacokinetic parameters for aminoglycoside dosing remains critical, as the serum drug concentration relates directly to both the therapeutic response and toxic effect. In the initial dosing of aminoglycosides, the volume of distribution is especially important because the dosage is calculated by multiplying the volume of distribution by the desired serum concentration. Aminoglycosides distribute into mainly the extracellular fluid and it has been reported that the volume of distribution is 0.25 L/kg. Penetration of polar aminoglycosides into adipose tissue occurs to some extent, but varies according to the degree of obesity. Therefore, dosages may be overestimated or underestimated according to the type of the dosing weight in overweight or underweight patients. Prior investigations have suggested various dosing weights which are multiplied by the popular volume of distribution to calculate the total volume of distribution. Based on other investigations, we calculated a new dosing weight which was applicable to all patients regardless of obesity in order to use the popular volume of distribution. We estimated IBW+$0.414^{\ast}$(TBW-IBW) as a new dosing weight with the SAS program. A new dosing weight is similar to those of other studies which examined in morbidly obese patients. Consequently we suggests that the dosing weight reported in morbidly obese patients can be extended to a broader patients population. But we found that the volume of distribution per kilogram from our patients was significantly larger than that for foreign patients(0.343L/kg vs 0.25 L/kg)(Kor. J. Clin. Pharm. 1999; 9(1): 15-18)

• 소성∙가공
• /
• 제20권2호
• /
• pp.160-166
• /
• 2011

Weight reduction while maintaining functional requirements is one of the major goals in the automotive industry. The use of lightweight magnesium alloys offers great potential for reducing weight because of the low density of these alloys. However, the formability and the surface quality of the final magnesium alloy product for auto-body structures are not acceptable without a careful optimization of the design parameters. In order to overcome some of the main formability limitations in the stamping of magnesium alloys, a new approach, the so-called "hybrid technology", has been recently proposed for body-in-white structural components. Within this approach, necessary level of mechanical joining can be obtained through the use of lightweight material-steel adhesion promoters. This paper presents the development process of an automotive hybrid hood assembly using magnesium alloy sheets. In the first set of material pairs, the selected materials are magnesium alloy AZ31B alloy and steel(SGCEN) as inner and outer panels, respectively. In order to optimize the design of the inner panel, the stamping process was analyzed with the finite element method (FEM). Laser welding by CW Nd:YAG were used to join the magnesium alloy sheets. Based on the simulation results and mechanical test results of the joints, the determination of die design variables and their influence on formability were discussed. Furthermore, a prototype based on the proposed design was manufactured and the static stiffness test was carried out. The results demonstrate the feasibility of the proposed hybrid hood with a weight reduction of 25.7%.

• 한국환경농학회지
• /
• 제27권3호
• /
• pp.279-284
• /
• 2008

We investigated whether carboxylate exudation of Brassica pekinensis Rupr. was affected by nitrate deposition from simulated acid rain. A gas chromatographic (GC) analysis was employed for the determination of low molecular weight organic acids (LOA) in rhizosphere soils, bulk soil, roots and leaves of Brassica pekinensis Rupr.. Rhizosphere soils were collected after 8 weeks of plant growth by first removing the bulk soil from the root system and then by mechanical move off the rhizosphere soil that adhered to the root surface with soft brush. Soil and plant materials were simultaneously extracted with the mixture of methanol and sulfuric acid (100:7, v/v). Seven organic acids, oxalic, malonic, fumaric, succinic, maleic, L-malic and citric acid were identified and quantified by GC equipped with FID. Oxalic, L-malic, and citric acids were found in both the bulk and rhizosphere soils, while most LOAs were not detected in the control treatment. On the contrary, except maleic acid, all other organic acids were detected in the leaves and roots of cabbages treated with nitrate deposition.

• Advances in concrete construction
• /
• 제1권4호
• /
• pp.319-340
• /
• 2013

This paper presents a comparative study on the double-K fracture parameters of concrete obtained using four existing analytical methods such as Gauss-Chebyshev integral method, simplified Green's function method, weight function method and simplified equivalent cohesive force method. Two specimen geometries: three point bend test and compact tension specimen for sizes 100-500 mm at initial notch length to depth ratios 0.25 and 0.4 are used for the comparative study. The required input parameters for determining the double-K fracture parameters are derived from the developed fictitious crack model. It is found that the cohesive toughness and initial cracking toughness determined using weight function method and simplified equivalent cohesive force method agree well with those obtained using Gauss-Chebyshev integral method whereas these fracture parameters determined using simplified Green's function method deviates more than by 11% and 20% respectively as compared with those obtained using Gauss-Chebyshev integral method. It is also shown that all the fracture parameters related with double-K model are size dependent.

• 한국산업보건학회지
• /
• 제15권3호
• /
• pp.176-182
• /
• 2005

American Conference of Governmental Industrial Hygienists (ACGIH) adopted the Lifting Threshold Limit Values ($TLVs^{(R)}$) in 2005 as a guideline for protecting the workers from work-related low back and shoulder disorders associated with repetitive lifting tasks. The TLVs consist of three tables with recommended weight limits for lifting tasks and their determination procedures are simple. The TLVs sans the material weight/the recommended values (LITLVs) were obtained from 45 lifting tasks in ship engine manufacturing factories. These values were compared and correlated with the Recommended Weight Limits (RWLs) and lifting indices (LIs) determined by the Revised Lifting Equation (LE) of the National Institute for Occupational Safety and Health (NIOSH). The average ratio, LITLVs/LIs, was 0.8 (LITLVs: $1.3{\pm}0.8$, LIs: $1.6{\pm}0.7$). Thus, the TLVs underestimated the risk than the LE. The LITLVs were highly correlated with LIs (r=0.82). The predicted value of LITLVs when LIs=1 wa 0.76. Using the predicted TLVs the higher risk ones of a large number of tasks can be screened to be further investigated.

• 분석과학
• /
• 제8권4호
• /
• pp.865-868
• /
• 1995

The method of matrix-assisted laser desorption ionization mass spectrometry has been used to solve some bioanalytical problems, which is difficult to analyse by general methods. For the selection of proper laser wavelength and matrices, eight matriees was used with laser wavelength of 226 and 355nm. The result shows that with wavelength of 355nm better results could be obtained with most of the matrices. The molecular weight of eytochrome C, which was seperated by gel electrophoresis and electro-blotted onto NC membrane is determined by MALDI. The accuracy is better than 0.1%, which is much higher than that of SDS-PAGE. Protein mixture extracted from crude peanut oil is directly determined by MALDI. The molecuiar weight of its three components are determined, and the result also demonstrated that these proteins are in free manner. As proteins arc in 2S bond, with the traditional method, SDS-PAGE, it is not able to decide whether protein exists in combination mode or in free manner. In the technique of two phase aquesous solution, which is used for separating biomaterials, water soluble polymers stained with dyes are used in this technique. By the use of MALDI the number or the dye molecules react with the polymer PEG molecule are determined, and that is difficult to determined by other methods.

• Journal of Microbiology and Biotechnology
• /
• 제23권7호
• /
• pp.1015-1022
• /
• 2013

We recently showed that polylysine, the polymer of lysines, retains anti-prion activity. Although the effectiveness of prion inhibition by polylysine was demonstrated with the regimen tolerated in mice, a determination of quantitative polylysine toxicity is necessary to precisely address the in vivo toxicity level of polylysine. In this communication, we report the results of body weight monitoring and hematologic tests performed in CD-1 mice that received two different tolerable dosages of polylysine for an either 5-day or 4-week period. We found that there was no significant alteration in overall serum chemistry, blood cell count, and body weight gain compared with controls. The only notable quantitative change with statistical significance was the decrease of platelet numbers in mice subchronically administered with polylysine. Our results suggest that polylysine is harmless in mice if administered for a short period, but administrations of polylysine in mice may require considerate attention for safety in future investigations as mice chronically receive tolerable doses of polylysine.

• Corrosion Science and Technology
• /
• 제21권3호
• /
• pp.171-183
• /
• 2022

The performance and inhibitory action of the aqueous extract of Cyperus Conglomeratus's leaves against corrosion of XC70 steel in a 1M HCl acid medium are studied by the determination of the weight loss, the potentiodynamic polarization curves analysis, and electrochemical impedance measurements (electrochemical techniques). The corrosion inhibitory efficiency of XC70 steel increases with the increasing concentration of the green inhibitor, however, the corrosion rate of the steel decreases. Weight loss measurements show that the maximum percentage corrosion inhibition efficiency is approximately 61.86%, while the analysis of the mixed character polarization curves shows that the inhibitor could achieve an inhibition efficiency of 86.96%. The electrochemical impedance study confirmed that the value of the charge transfer resistance (R_ct) increases and the value of the double layer capacity (C_dl) decreases with increasing concentration of the aqueous extract of Cyperus Conglomeratus's leaves, thus increasing the inhibition efficiency. The study showed that this aqueous extract acts by adsorption on the metal surface; this adsorption follows the Langmuir isotherm. This research work showed that Cyperus Conglomeratus leaves extract acts as an effective and eco-friendly inhibitor on mild steel in an acid medium.

• Fisheries and Aquatic Sciences
• /
• 제26권4호
• /
• pp.256-267
• /
• 2023

The suitability of any fish species for successful aquaculture requires basic information on its reproduction and growth. This study investigated some facets of the reproductive biology of Synodontis shall (Mochokidae) from River Siluko in Nigeria. Fish samples were collected forth-nightly for a duration of fourteen (14) months-March 2015 to April, 2016 with the assistance of artisanal fishermen. Fishes were identified using taxonomic guides and standard techniques were used for determination of sex ratio, gonad maturation and fecundity. Linear regression method was used to define the correlation between fecundity and fish length, body weight and ovary weight. Results showed that sex ratio did not indicate a significant divergence (p > 0.05) from the 1 male to 1 female distribution ratio (1:1.41). Gonad morphology revealed paired gonads. Testes and ovaries were classified into four maturity stages: immature, resting, ripening and ripe. Gonadosomatic index ranged from 0.04 to 5.68 (males) and 0.03 to 20.19 (females). Absolute fecundity ranged from 1,014 to 4,520 eggs (mean = 2,592 eggs) and did not correlate significantly (p > 0.05) to ovary weight. This study has contributed to existing data on the biology of freshwater fish species in Nigeria and provided valuable information for fishery management tools in the conservation and utilization of this valuable freshwater fish species.

• 생태와환경
• /
• 제57권2호
• /
• pp.111-122
• /
• 2024

Zooplankton biomass is essential for understanding the quantitative structure of lake food webs and for the functional assessment of biotic interactions. In this study, we aimed to propose a biomass (dry weight) estimation method using the body length of cyclopoid copepods. These copepods play an important role as omnivores in lake zooplankton communities and contribute significantly to biomass. We validated several previously proposed estimation equations against direct measurements and compared the suitability of prosomal length versus total length of copepods to suggest a more appropriate estimation equation. After comparing the regression analysis results of various candidate equations with the actual values measured on a microbalance-using the coefficient of variation, mean absolute error, and coefficient of determination-it was determined that the Total Length-DW exponential regression equation [W=0.7775×e^2.0183L; W (㎍), L (mm)] could be used to calculate biomass with higher accuracy. However, considering practical issues such as the morphological similarity between species and genera of copepods and the limitations of classifying copepodid stages, we derived a general regression equation for the pooled copepod community rather than a species-specific regression equation.