철원 갈말-김화 지역의 쥐라기 복운모 화강암체 내 페그마타이트에서는 다양한 망간-철 인산염광물의 집합체가 산출되고 있으며, 후기 마그마 단계로부터 열수단계 및 지표 풍화 단계에서 다양한 광물상의 변화가 유도되었다. 철원 복운모 화강암은 낮은 대자율 값을 갖는 전형적인 S-형 화강암으로 중알루미나질~고알루미나질, 후-충돌대 환경을 나타내고 있다. 페그마타이트는 K-Ar 연대가 약 153 Ma로서 복운모 화강암의 K-Ar 연대($151{\pm}4Ma$)와 전반적으로 일치하고 있어 동일 기원의 마그마로 추정된다. 한편 갈말-김화 페그마타이트는 광물조성에 의한 분류기준에 의하면 백운모-희유원소 종, 리튬 세부종, 녹주석 유형에 속하는 녹주석-콜롬바이트-인산염광물으로 구분되며, LCT(Li-Cs-Ta) 계열에 해당한다. 망간 인산염광물 중 트리플라이트는 주로 후기 마그마 단계에 정출되었으며, 열수 단계에서는 망간 인산염광물의 변질광물인 루코포스파이트와 잔사이트로 정출되었다. 풍화 단계에서 트리플라이트는 포스퍼시더라이트와 망간 산화물로 교대되어 산출된다.
본 연구는 두만강 하류 지역에 대규모로 발달한 사구 지형의 분포 및 지표 환경, 퇴적물의 특성, 기원 및 형성과정을 밝히고, 두만강 하류 일대의 하천 및 해안 환경변화를 고찰하고자 한다. 이를 위해, Landsat, Spot 영상을 이용하여 지표피복을 분석하고, 2회의 현지 야외조사를 실시하였으며, 입도분석 및 현미경 관찰을 통해 사구 퇴적물 시료를 분석하였다. 위성영상에서 파악된 사질퇴적지형 요소들은 삼각주, 사취, 이동사구, 정착사구, 사주, 사주피복 수변식생으로 구분되었다. 사구 퇴적물에 대한 입도 분석 결과, 조사 지역 중 가장 상류 쪽에 해당하는 DM3과 DM4에서 하성보다는 해성 모래와의 상관성이 높게 나타났다. 이는 현재 사구를 이루는 모래의 입도 특성이 두만강 하류 지역의 현재 자연환경을 반영하고 있지 않음을 의미하는 것이다. 현미경 분석 결과, 모든 시료에서 풍화에 가장 강한 석영의 비율이 $65{\sim}83%$로 가장 높았다. 그러나 $30{\sim}40%$를 차지하는 광물 입자의 표면은 화학적 풍화를 받아 황색의 물질로 표면이 코팅되어 있으며, 물리 화학적 풍화에 의한 바늘 및 그물 모양의 거친 표면 형태와 에칭 피트가 나타난다.
구조지형은 기반암 단층과 암석의 경연차와 같은 약대를 따라 풍화, 침식의 프로세스의 영향을 받아 만들어진 지형이다. 지구 조지형은 현재 활동하고 있는 지진, 화산, 단층과 같은 지구조운동으로 인해 만들어진 지형이다. 우리나라와 같이 판의 내부에 위치하여 지구조운동의 영향이 상대적으로 적고 기후적 특성을 고려하면 실제 현장에서 이 둘을 명확하게 구분하는 것은 어렵다. 최근 활성단층 연구의 증가에 따라 지구조지형에 초점을 맞추어 연구가 진행되고 있으나 더 명확한 지구조지형을 분류하기 위해서는 기반암의 특성에 따른 구조지형의 발달 양상에 대한 이해가 필요하며 기반암의 특성만을 따로 비교분석하기에는 현재 지형은 지구조운동과 기후의 영향을 동시에 받았기 때문에 구조적 요인만을 대상으로 하기에는 한계가 있다. 본 연구는 2차원 수치지형발달모형을 이용하여 기후와 지구조운동에 의한 요인을 제한하고, 기반암의 차이에 따른 지형의 시공간적 발달특성에 대해 연구하였다. 기반암 차이에 따른 지형특성을 구분하기 위해 사면·하천과 관련된 지형분석을 하였다. 연구결과 침식가능성이 높은 지형은 평균고도, 기복량, 경사도, 하천차수, 하천경사도지수 모두 낮게 나왔다. 또한 기반암 하천분석 결과 기반암 경계부분에서 천이점이 나왔다. 실제 지형을 연구할 때 지금까지는 지구조운동으로 인한 것인지, 구조적 요인을 받은 것인지 구분할 때 천이점에 있는 기반암의 차이만 고려하였다. 본 연구는 지구조지형과 구조지형을 분류할 때 구조지형으로 분류하기 위해서는 기반암의 차이뿐만 아니라 다양한 지형인자들을 고려하여 종합적으로 판단하여야 할 것임을 시사한다.
이 논문에서는 원각사지 십층석탑 표면에 발생한 오염물의 형성과정을 연구하였다. 연구결과, 흑색오염물은 석탑의 화학적인 풍화로 인해 석고가 일차적으로 형성되고 공기 중의 탄소화합물이 석탑표면에 고착되면서 생성된 흑연에 의해 발생한 것으로 판단되며, 발생시기는 1933년 이전으로 확인되었다. 백색오염물은 보호각 상부 마감재의 노후화 및 구조물의 훼손으로 발생한 방해석이 석탑표면에 재결정화 되면서 형성되었으며, 발생시기는 보호각이 설치된 1998년에서 2013년 사이에 발생한 것으로 판단된다. 원각사지 십층석탑의 장기적인 보존을 위해서는 보호각 상부에 형성된 오염물의 제거, 구조물의 방청처리 및 지속적인 모니터링이 요구된다.
This study considers the proper repair techniques by examining the most representative repair cases of the Korean arch bridges and proposes the constructional manual which can apply similar occasions. The cases are Seonamsa Seungseongyo and Songgwangsa Geukrockgyo where this researcher had taken part in the repair works. This Study proposes the maintenance construction manual about the performance degradation drew by performance degradation of the both Korean arch bridges in the maintenance process. First, arch bridge maintenance should be carried out in the dry season, when water is impermeable in the bottom surface of the bridge. Moreover, risk factors of the maintenance should be excluded to secure the water vally flow, the bypass and the temporary bridge. Second, prior to repair, it has to precede (1)3D shooting (2)formal examination (3)structure safety test (4)geological and lithic surveys (5)arch curvature establishment and makeshift frame settlement before transformation (6)relationship expert comments. Third, if the baduk and the foundation stones are inevitable to replace due to performance degradation on the foundation, it should use the high quality stones and secure greater stress by extending the standard range. The foundation on irregular rock needs to be flattened and underside on the replaced materials require Grengyijil to deliver the equal loads. Fourth, In the process of dismantling the stones of the arched bridge, it could make heavy weathering degree and not reuse the materials. Charge should converge the expert advices to choose the reuseable, the conservate and the alternative materials, and increase the reutilization of the raw materials by preservation and reinforcement treatments. Fifth, the side wall should be repaired by the rubble work technique which is not able to pile compost satiety, so it must use long depth of masonary stones for reinforcement. It is considered to reinforce the stone wall in shore as much as possible and protect the abutment and the side wall on the upstream for the arch bridge maintenance works.
Kim, Byung-Gon;Shin, Hyunjin;Lee, Seunghak;Park, Junboum
한국지하수토양환경학회지:지하수토양환경
/
제21권2호
/
pp.1-7
/
2016
Ferrous slag is a by-product from steel making process and waste concrete is generated from construction activities. Large part of ferrous slag and waste concrete are recycled as construction materials. However, Ca2+ leaching out of ferrous slag and waste concrete in the water-contacting environment can cause a strength change. Strength can be reduced due to the dissolution of solid form of CaO which is one of the main contents of ferrous slag and waste concrete. On the other hand, strength can be enhanced due to the pozzolanic reaction of cementitious components with water. In this study, steelmaking slag, blast furnace slag, and waste concrete were aged by exposure to raining events, and the change of their compaction and shear strength characteristics was investigated. Optimum moisture content of all materials used in this study increased with aging period while maximum dry unit weight slightly decreased, implying that the relative contents of fine particles increased as the CaO solid particles were dissolved. Internal friction angle and shear strength of recycled materials also increased with aging period, indicating that the materials became denser by the decrease of void ratio attributed to the fine particles generated during the weathering process and the development of cementitious compounds increasing the bonding and interlocking forces between the particles. The results of this study demonstrated that mechanical strength of recycled materials used as construction materials has little chance to be deteriorated during their service life.
동구릉은 세계문화유산인 조선왕릉의 대표적인 곳으로, 봉분과 관계된 석조물 979점과 능과 봉분 주위에 석물, 석인상, 석수 등 310점으로 총 1,289점(일부 능의 지대석 제외)이 배치되어 있다. 동구릉 내 석조물은 대부분 흑운모화강암으로 구성되어 있지만 일부 능에서는 담홍색화강암으로 구성되어 있다. 전암대자율 측정결과 천장한 현릉(왕후)을 제외한 건원릉부터 목릉까지 범위 및 평균값이 유사하여, 동일한 채석지에서 산출된 돌을 사용한 것으로 판단된다. 숭릉, 수릉, 경릉의 경우 대자율 범위가 넓게 분포하는데, 조성 당시 석조물과 능을 옮기는 과정에서 새롭게 제작된 석조물이 섞이거나, 채석산지가 다른 석재를 사용하였기 때문이라 판단된다. 보존상태 조사결과 봉분부재와 능상 석조물 모두 표면풍화 중 박리박락과 입상분해에 의한 손상비율이 가장 높았으며, 표면변색의 경우 봉분부재는 황색과 토사, 능상 석조물은 황색, 흑색, 토사 등 복합적인 변색이 확인된다. 생물영향은 동구릉 내 손상양상 중 주된 요인으로 상대적으로 4~5등급 점유율이 높게 확인되었다. 이는 왕릉의 환경이 생물이 정착할 수 있는 토양형성이 용이하고 지속적으로 수분을 얻을 수 있는 조건이 갖춰져 있기 때문이라 판단된다. 구조상태의 경우 비교적 양호한 상태를 보이고 있다. 각 능별 종합훼손등급을 산출한 결과 전체적으로 양호한 상태를 보이고 있으나 이른 시기에 조성된 건원릉과 현릉의 경우 상대적으로 높은 풍화등급을 보였다. 동구릉 내 석조물은 표면풍화로 인해 부재 조각이나 문양 등 상당부분이 손실되었으며 2차 손상이 진행 중이다. 또한 각각의 손상요인이 단독적으로 발생하기보다는 복합적으로 작용하여 다양한 손상이 지속적으로 진행되고 있다. 따라서 왕릉 석조물의 보존처리뿐만 아니라 처리 이후에도 효율적인 관리를 위한 석조물의 정기적 보존현황관리와 자료 확보가 필요하며, 구체적인 관리 매뉴얼과 시스템이 갖춰져야 한다. 이번 연구는 세계문화유산 동구릉 내 석조물의 보존현황을 조사하고 체계적으로 분류하여 보존처리의 우선순위 및 필요성을 제공하였을 뿐만 아니라 향후 동구릉 보존관리 방안을 수립하는데 기초자료로 활용할 수 있을 것으로 판단된다.
본 연구에서는 춘천 고성리 백자가마터에서 출토된 백자 편, 백토 적치장 수습 백토 원료, 수비공 1호 내 태토 침전물 등 총 3그룹을 대상으로 재료학적 분석을 진행하였다. 연구목적은 도자기 제조과정에서 최초로 적치된 백토, 수비를 거친 태토, 최종 제작된 도자기 태토원료의 화학적 특성을 비교하고자 하였으며, 제작 완료된 춘천 고성리 가마터 백자의 특성을 살펴보고자 하였다. 분석방법으로는 주성분 분석, 미량성분 분석, 광물상 분석을 실시하였다. 주성분 분석결과 분석대상 백자의 태토는 RO2 4.04~4.28, RO + R2O 0.30~0.31 몰의 영역에서 군집하며, 수비공 1호 내 태토 침전물과 비교적 유사한 함량을 나타내었다. 하지만, 백토 적치장 수습 백토 원료와는 큰 차이가 확인되었으며, 이는 보다 양질의 도자기를 제작하기 위해 태토의 수비과정을 거치면서 발생한 결과로 확인되었다. 태토의 광물상에서는 백토 적치장 수습 백토 원료 및 수비공 1호 내 태토 침전물의 광물상은 거의 일치하지만, 출토 백자 완성품의 태토에서는 소성과정을 거치면서 소성온도에 의해 상전이 된 결과로 Quartz와 Mullite이 검출되었다. 도자기의 제작과정 및 태토 원료의 풍화과정에 영향을 받지 않는 희토류 원소는 3그룹 모두 일정한 경향성을 나타내어 동일기원임을 알 수 있었다.
본 연구에서는 ${\bigcirc}{\bigcirc}$지역에서의 터널 간섭사례에 따른 적정 지반 구역화 및 각 구역별 특성치 분석을 수행하였다. 본 대상 지역은 호상흑운모 편마암 및 흑운모 편암, 화강 편마암이 심도와 평면상에서 불규칙하게 분포하고 있는데, 전반적으로 풍화대가 깊게 분포하고 있으며, 단층대 및 파쇄대가 깊은 심도에서도 대규모로 분포하고 있었다. 본 사례에서와 같이 특정 간섭부분의 공간적 지층특성 구분이 향후 안정성 분석 및 설계반영에 매우 중요하게 작용하는 경우, 기존 터널설계시의 지층구분 및 대표 특성치 산정 방식은 적정 지층특성 분석에 많은 한계점을 지니고 있었다. 본 연구결과, 각종 지반조사 결과의 종합 및 분석을 통해 공간적 지층구분 및 적정 특성치 산정이 향후 안정성 검토 등에 있어 매우 유효하게 적용됨을 알 수 있었다.
As the world wind energy market grows rapidly, the productions of wind power generation equipment have recently increased, but manufacturers are not able meet this requirement. Particularly offshore wind energy industry is one of the most popular renewable energy sectors. To generalize welding processes, the welding automation is considered for steel structure manufacturing in offshore wind energy to get high quality and productivity. Welding technology in construction of the wind towers is depended on progress productivity. In addition, the life of wind tower structures should be considered by taking account of the natural weathering and the load it endures. The root passes are typically deposited using Gas Tungsten Arc Welding(GTAW) with a specialized backing gas shield. Not only the validation consists of welders experienced in determining the welding productivity of the baseline welding procedure, but also the standard testing required by the ASME section IX and API1104 codes, toughness testing was performed on the completed field welds. This paper presents the welding characteristics of the root-pass welding of high tensile steel in manufacturing of offshore wind tower. Based on the result from welding experiments, optimal welding conditions were selected after analyzing correlation between welding parameters(peak current, background current and wire feed rate) and back-bead geometry such as back-bead width(mm) and back-bead height performing root-pass welding experiment under various conditions. Furthermore, a response surface approach has been applied to provide an algorithm to predict an optimal welding quality.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.