• The Research Journal of the Costume Culture
• /
• v.28 no.6
• /
• pp.771-786
• /
• 2020

This study aims to develop a life-friendly, wrap-one-piece style dance sports practice wear considering the physical characteristics of middle-aged, abdominally obese women. These types of practice wear allow people to enjoy exercise easily and to wear these garments as daily wear while meeting the requirements for dance sports wear. The three participants selected for this study were all women with five or more years of dance sports experience and were all average sized on Korea's abdominal obesity scale. In the first phase of the study, practice wear was created in a total of nine styles with three different styles of neckline depths for three different styles of dress skirt lengths. In the second phase of the study, the practice wear was created in 15 styles with five different styles of sleeve lengths for three different styles of waistline heights. After analyzing the design preferences of the participants, the fit preferences of the designs were evaluated and the final appearance was analyzed in order to suggest a pattern. The results of the subjects' first and second preference evaluations showed a preference for a 10 centimeter neckline depth, for high waistlines, and for elbow to wrist-length sleeves. The implementation of this research is expected to be extensive, as its results can be used as basic data for making lifestyle dance sports practice wear that covers the physical insecurities of middle-aged, abdominally obese women and enables them to enjoy their leisure time.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.8 no.1
• /
• pp.95-102
• /
• 1971

Since the fuel oil of the bunker C grade, which is commonly burnt in the large marine diesel engine, causes the corrosive wear of cylinder liners and piston rings, a cylinder oil of high alkality is frequently used to prevent the wear. This practice, however, brings us an another problem to cause the abnormal wear. In this study the author made an investigation of the mechanism of the abnormal wear by the experiments surveying the influences of the alkality of a cylinder oil and the temperature of cylinder wall on the wear. The major results obtained from this study are as follows; A cylinder oil of low alkality is clearly effective for the preventation of the abnormal wear. Therefore, it is recommended that, prio to using a cylinder oil of high alkality, a cylinder oil of low alkality should be used until bringing an end to the initial wear. It is also observed that the abnormal wear depends largely on the temperature of the cylinder wall, that is, the higher the temperature goes up the severer the wear grows.

• The Journal of Korea Robotics Society
• /
• v.19 no.1
• /
• pp.65-70
• /
• 2024

Tool wear is considered an important issue in manufacturing and engineering, as worn tools can negatively impact productivity and product quality. Given that the wear status of tools plays a decisive role in the production process, measuring tool wear is a key task. Consequently, there is significant attention in manufacturing fields on the precise measurement of tool wear. Current domestic methods for measuring wear are limited in terms of speed and efficiency, with traditional methods being time-consuming and reliant on subjective evaluation. To address these issues, we developed a measurement module implementing the DeepContour algorithm, which uses image processing technology for rapid measurement and evaluation of tool wear. This algorithm accurately extracts the tool's outline, assesses its condition, determines the degree of wear, and proves more efficient than existing, subjective, and time-consuming methods. The main objective of this paper is to design and apply in practice an algorithm and measurement module that can measure and evaluate tool wear using image processing technology. It focuses on determining the degree of wear by extracting the tool's outline, assessing its condition, and presenting the measured value to the operator.

• Korean Journal of Human Ecology
• /
• v.5 no.1
• /
• pp.55-64
• /
• 1996

The aim of this study is to get the basic data to design the clothing for the female teachers. In this study, we survey the practice of the wear in the spring and the fall of the 422 female teachers in primary, middle and high school, and their wearing sensation according to clothing construction factors. The results are as follows: first, the female teachers frequently wear blouse and skirt, jacket and blouse, jacket and T-shirts, cardigan and T-shirts in upper wear. Second, most female teachers had troubles in their clothing at work. They had serious troubles in writing on the blackboard, due to the improper form and. length of the sleeves, and the inconvenience of their skirt is due to the improper length, while they go up the strains. Third, the comfortable factors of the female teachers' blouse are as follows; round neck line, soutien and peter pan collar, sleeve attatched bodice with a little loose armhole, $10{\sim}20cm$ under from waist in length, front slit, and fastening bottons. In case of skirt, they perceive A-lined, flared, pleats skirt more convieniently than tight one, which are 10cm under from kneeline in length, side fastening system, back slit.

• The korean journal of orthodontics
• /
• v.46 no.1
• /
• pp.36-41
• /
• 2016

Objective: The aim of this study was to evaluate retention practices commonly employed by orthodontists. The objectives were to identify the types of retainer frequently used and to investigate the variations in retention practice. Methods: A total of 97 orthodontists were randomly selected, and a questionnaire consisting of 25 multiple-choice questions sent to them by mail. Upon receiving of the completed questionnaires, the data were statistically analyzed. Results: A total of 32 responses were received; among these, 59.4% of orthodontists' practiced is in a government setting and 40.6% were in private practice. A vacuum-formed retainer was the most commonly used removable retainer for both maxillary (46.9%) and mandibular (46.9%) arches, followed by a Hawley retainer (maxilla, 43.8%; mandible, 37.5%), and a fixed retainer (maxilla, 3.1%; mandible, 9.4%). Of the responding orthodontists, 78.1% prescribed full-time wear (more than 20 h per day) for a duration of 3-9 months for a maxillary arch, compared to 71.9% for the mandibular arch. Only 18.8% of the orthodontists prescribed part-time wear of the retainer for the maxillary arch, compared to 21.9% for the mandibular arch. The majority of orthodontists did not instruct their patients to stop wearing removable retainers (71.9%) or fixed retainers (66.8%) at any specific time and they preferred their patients to continue wearing retainers. Conclusions: Vacuum-formed retainers are the most commonly used retainers among orthodontists. The majority of orthodontists prescribed full-time wear for more than 20 h per day with a duration of 3-9 months and preferred indefinite use of the retainer.

• Journal of the Korean Society of Costume
• /
• v.57 no.2 s.111
• /
• pp.100-114
• /
• 2007

This study reports the dress style of Daesarye ceremony participants in the Yeong-Jo Era. The King Yeong-jo attending the archery practice ceremony wears Ikseonkwan(翼善冠), Golryongpo(袞龍袍), Okdae(玉帶), and Heukpihwa(黑皮靴) while royal family members and officers in the ceremony wear Heukdalryeong(黑團領). Each officer in Sangbok(常服) who shoots arrows wears a ring and a wristlet with an archery case on his waist. King's bodyguards wear Yungbok(戎服) or Sangbok(常服). Especially, Muyaebyeolgam(武藝別監) wears Hong-geon(紅巾) and a green Jikryeong(直領). Yujiang-gun(儀位軍) wear Pirip(皮笠) and Hongjuryi(紅紬衣) while Hyeopryeongun(狹輦軍) and Hyeopryeogun(狹輦軍) wear Hong-geon(紅巾), Hongyui((紅衣), Cheonghaengjeon(靑行纏), Hakchang(鶴雲), Hongmokdae(紅木帶), and Unhye(雲鞋). Gyeonmabae(牽馬陪) wear Hwangchorip(黃草笠) and Hwangyui(黃衣). Seupjeongun(拾箭軍) and Hwaekja(獲子) wear Jageon(紫巾), Jayui(紫衣), and Unhye(雲鞋). Jeonak(典樂) wears Mora- bokdu and Noksayui(綠抄衣), while Ak-kong(樂工) wear Hwahwabokdu, Hongjuyui(紅紬衣), Ojeongdae, and Heukpihwa(黑皮靴). Lastly, Hyeopryulrang(協律郎) wears Heukdalryeong(黑團領).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.3
• /
• pp.137-146
• /
• 2018

Tooth wear is a multifactorial condition, leading to the loss of dental hard tissues. While for many years, tooth wear was a condition of little interest in daily clinical practice, nowadays this is changed. Tooth wear is becoming increasingly significant in maintaining the long-term health of the dentition. This becomes especially important when the dentition is kept relatively intact in the contemporary ageing population, and edentulism is decreasing. There is also evidence that the prevalence of tooth wear is growing. It is a natural consequence of the unidirectionality of tooth wear that it is frequently used as a means of individual age estimation. Tooth wear was very serious in ancient populations up to the medieval period. Tooth wear is thus studied in a wide variety of areas. The purpose of this paper is to summarize and analyze the many issues surrounding tooth wear through recent studies in various fields and to search for future research direction.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.26 no.3
• /
• pp.129-143
• /
• 2024

This study aims to develop yoga wear for active senior women aged 50-60 who engage in social activities based on time and economic availability. With the rapid growth of the elderly population, active seniors have become prominent consumers, showing a keen interest in cultural and sports activities, particularly yoga, which suits their physical structure and characteristics. Despite the increased interest in home training and healthcare post-pandemic, research on active senior's athleisure wear remains insufficient compared to younger demographics. This study conducted a literature review to understand the characteristics of active seniors and their needs for yoga wear, followed by a survey of 24 women aged 50 and above who practice yoga. The survey was conducted to assess yoga participation, current yoga wear usage, and design preferences. Results indicated that most respondents practiced yoga for less than a year, primarily for health and stress relief. While 65.2% were aware of specialized yoga brands, only 50% wore them, citing high prices and size mismatches as barriers. Functionality was the most critical factor affecting yoga wear purchase decisions, followed by design, material, and color/pattern preferences. Preferred top designs included V-neck, crew neck, and cowl neck with three-quarter sleeves, while leggings with a full-band waist were favored for bottoms. The study highlights the need for affordable, functional, and size-diverse yoga wear for active senior women, suggesting that modern, sophisticated designs are more appealing to this demographic. These findings provide essential guidelines for developing yoga wear that meets the specific needs of active senior women. As a result, this research has suggested three different yoga wear designs for active seinor women, using 3D Clo.

• Tribology and Lubricants
• /
• v.30 no.4
• /
• pp.199-204
• /
• 2014

Various heat-treated and surface coating methods are used to mitigate abrasion in sliding machine parts. The most cost effective of these methods involves hard coatings such as diamond-like carbon (DLC). DLC has various advantages, including a high level of hardness, low coefficient of friction, and low wear rate. In practice, a supporting layer is generally inserted between the DLC layer and the steel substrate to improve the load carrying capacity. In this study, an indentation and sliding contact problem involving a small, hard, spherical particle and a DLC-coated steel surface is modeled and analyzed using a nonlinear finite element code, MARC, to investigate the influence of the supporting layer thickness on the coating characteristics and the related coating failure mechanisms. The results show that the amount of plastic deformation and the maximum principal stress decrease with an increase in the supporting layer thickness. However, the probability of the high tensile stress within the coating layer causing a crack is greatly increased. Therefore, in the case of DLC coating with a supporting layer, fatigue wear can be another important cause of coating layer failure, together with the generally well-known abrasive wear.

• Tribology and Lubricants
• /
• v.15 no.2
• /
• pp.131-140
• /
• 1999

This study dealt with some problems occurred in spectrometric oil analysis that has been popularly used for a machine condition monitoring in various fields of industry. One of the problems is that spectrometric technique could not analyze contaminants of large particle (larger than 10 $\mu\textrm{m}$) in lubricating oils. This limitation caused a serious problem in analyzing lubricated machine conditions since wear debris of large size represents better critical machine conditions. In this work, this problem was found to be solved by using a filtration method prior to spectrometric analysis. Another problem could be that spectrometric analysis is incapable of identifying contaminants. This nay mislead the result seriously in practice. This problem was surveyed by analyzing both various types of industrial lubricants and laboratory simulation tests, and the solutions to the problem were suggested in this work.