• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.63-70
• /
• 2002

In tunnel construction, the information on the rock quality and the location of fault or fracture are crucial for economical design of support pattern and for safe construction of the tunnel. The grade of rock is commonly estimated through the observation with the naked eye of recovered cores in drilling or from physical parameters obtained by their laboratory test. Since drilling cost is quite expensive and terrains of planned sites for tunnel construction are rough in many cases, however, only limited information could be provided by core drilling Electrical resistivity and EM surveys may be a clue to get over this difficulty. Thus we have investigated electrical resistivity and EM field data providing regional Information of the rock Quality and delineating fault and fracture over a rough terrain. In this paper, we present some case histories using electrical resistivity and EM survey for the site investigation of tunnel construction. Through electrical resistivity and EM survey, the range and depth of coal seam was clearly estimated, cavities were detected in limestone area, and weak zones such as joint, fault and fracture have been delineated.

• 화약ㆍ발파
• /
• 제8권4호
• /
• pp.3-22
• /
• 1990

The $\varphi{4.5}$ meters pilot tunneling work is almost done to the $\varphi{11.3}$ meters twin tunnel of NAM SAN No1. The south side pit of 400 meters is weak zone of Rock status, so client request us to allow the cautious blasting pattern for drilling on the condition of 0.2 kine vibration allowance limited for the safety of side running tunnel. The pattern of cautious blasting carried out by 6 time divided fiving on the round drilling depth of 1.20 meters(1.10) and also applied control blasting method with line drilling due to the reduction of vibration.

• 미생물학회지
• /
• 제19권3호
• /
• pp.121-127
• /
• 1981

The constituents of molasses and effect of pH precipitate formation in molasses solution, vary according to its producing districts. The formation of precipitation is not so changeable in the range of buffering zone of molasses solution(pH4.3-6.3) in philippine molasses according to the change of pH value. On lower or higher than the range of buffering zone, the precipitation is increased from pH 4.3 to 2.8 and from 6.3 to 8.1, it is decreased when pH value is lower or higher than the pH value range. For molasses clarifying, it had better adjust the pH of molasses solution to neutral or weak alkali range out of the alkai side of the buffering zone, with lime solution. And then, add the calcium super phosphate solution to pH value of alkali side in buffering zone, as much as the pH of clarified molasses solution can reach to middle value in buffering zone. For the equilibrium of pH value on clarifying molasses, it takes plenty of time more than 6 hours.

• Steel and Composite Structures
• /
• 제26권1호
• /
• pp.31-44
• /
• 2018

This paper reports a novel steel beam-to-column connection suitable for use in the weak axis of I-section column. Monotonic and cyclic loading experimental investigations and numerical analysis of the proposed weak-axis connection were conducted, and the calculation procedure of the beam-column relative rotation angle and plastic rotation angle was developed and described in details. A comparative analysis of mechanical property and steel consumption were employed for the proposed I-section column weak-axis connection and box-section column bending connection. The result showed that no signs of fracturing were observed and the plastic hinge formed reliably in the beam section away from the skin plate under the beam end monotonic loading, and the plastic hinge formed much closer to the skin plate under the beam end cyclic loading. The fracture of welds between diaphragm and skin plate would cause an unstable hysteretic response under the column top horizontal cyclic loading. The proposed weak-axis connection system could not only simplify the design calculation progress when I-section column is adopted in frame structural design but also effectively satisfy the requirements of 'strong joint and weak member', as well as lower steel consumption.

• 한국터널지하공간학회 논문집
• /
• 제8권2호
• /
• pp.101-113
• /
• 2006

안정된 암반에 터널을 굴착하는 경우 아칭효과에 의해 막장주변에 응력재배치가 발생하고 터널 막장 전방에 연약대가 존재하는 경우 응력재배치가 충분히 이루어지지 않아 막장과 연약대 사이의 응력집중으로 인해 변위가 발생하게 된다. 만일 막장에 근접하여 측점에서 종방향, 횡방향, 연직방향의 3차원 절대좌표가 측정되는 경우 막장전방의 지반거동이 반영된 3차원 절대변위가 산정되고, 이러한 3차원 절대변위의 분석을 통해 막장전방의 지반조건을 예측할 수 있게 된다. 본 연구에서는 4개 현장에서 측정된 3차원 변위비의 경향선과 천단침하의 영향선/경향선 분석을 실시하여 연약대 위치를 추정하였고, 3차원 절대변위의 분석에 의해 추정된 연약대 위치를 동일한 구간에서의 TSP탐사로 추정된 연약대 위치와 비교함으로써 3차원 절대변위 해석기법의 현장 적용성을 검증하였다.

• 한국지반환경공학회 논문집
• /
• 제17권7호
• /
• pp.5-13
• /
• 2016

본 연구는 투수계수가 큰 취약대가 제방에 존재할 경우의 침투거동에 관한 것이다. 침하계, 간극수압계, 수직 토압계 및 FDR 센서로 구성된 지점형 센서와 분포형 TDR 센서를 이용하여 제방의 침투특성 및 제방거동을 계측하였다. 계측결과들은 2차원 및 3차원 수치해석결과들과 비교 분석되었다. 모형제방은 길이 7m, 폭 5m, 높이 1.5m의 크기이며 제외지 수위는 1.3m인 세립질 모래로 조성된 제방이다. 계측 및 수치해석의 침투거동이 거의 유사하여 적절한 계측시스템으로 제방의 안정성을 실시간 모니터링할 수 있음을 알 수 있었다. 수치해석의 경우 정상단면에서는 2차원 및 3차원 해석결과가 거의 동일하나, 취약단면을 고려할 경우 2차원 해석의 침윤선이 3차원 결과보다 빠르게 진행된 후 두 결과가 수렴되었다.

• Ocean and Polar Research
• /
• 제26권1호
• /
• pp.33-42
• /
• 2004

Effect of freshwater discharge on the long-term salt balance in the Northern and Central Indian River Lagoon (IRL) is successfully simulated by a new analytical solution to a water balance-based one-dimensional salt conservation equation. Sensitivity tests show that the salinity levels drop abruptly even during the dry season (November to May) due to the high surface runoff discharge caused by tropical storms, depressions, and passage of cold fronts. Increasing surface runoff and direct precipitation has risen by ten times, lowering the salinity level down to 12psu in the Northern Central zone, and to 17 psu in the Northern zone. However, the salinity level in the Southern Central zone has decreased to 25 psu. High sensitivity of the Northern Central zone to freshwater discharge can be partially explained by a rapid urbanization in this zone. During the dry season, less sensitivity of the Southern Central zone to the increased surface runoff is attributed to the proximity of the zone to the Sebastian Inlet and a strong diffusion condition possibly resulting from the seawater intrusion to the surficial aquifer at the Vero Beach. During the wet season, however, the whole study area is highly sensitive to freshwater discharge due to the weak diffusion conditions. High sensitivity of the IRL to the given diffusion conditions guarantees that the fresh-water release occurs during strong wind conditions, achieving both flood control in the drainage basin and a proper salinity regime in the IRL.

• Steel and Composite Structures
• /
• 제18권5호
• /
• pp.1177-1195
• /
• 2015

Six specimens are tested to investigate the cyclic behavior of beam-to-column abnormal joints in steel moment-resisting frames, which are designed according to the principle of strong-member and weak-panel zone. Key parameters include the axial compression ratio of column and the section depth ratio of beams. Experimental results indicate that four types of failure patterns occurred during the loading process. The $P-{\Delta}$ hysteretic loops are stable and plentiful, but have different changing tendency at the positive and negative direction in the later of loading process due to mechanical behaviors of specimens. The ultimate strength tends to increase with the decrease of the section depth ratio of beams, but it is not apparent relationship to the axial compression ratio of column, which is less than 0.5. The top panel zone has good deformation capacity and the shear rotation can reach to 0.04 rad. The top panel zone and the bottom panel zone don't work as a whole. Based on the experimental results, the equation for shear strength of the abnormal joint panel zone is established by considering the restriction of the bottom panel zone to the top panel zone, which is suitable for the abnormal joint of H-shaped or box column and beams with different depths.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.528-532
• /
• 1997

The structure of satellite was of six parts of control system, power system, thermal control system, remote measurement command system, propellant system and thrust system. In these parts, propellant system consists of propellant tank and thrust device. What we want to perform is optimum design to minimaize the weight of propellant tank. In order to design optimal propellant tank, several parameters should be adopted form the tank geometry like the relative location of the lug and variation of the wall thickness. So the analysis was executed by finite element analysis for finding optimal design parameters. The structure was devided into 3 parts, the initial thickness zone, the transitional zone, and the weak zone,whose effects on the pressure vessel strength was investigated. Finally the optimal lug location and the three zone thickness were obtained and the weight was compared with the uniform thickness vessel.

• 지질공학
• /
• 제30권3호
• /
• pp.289-302
• /
• 2020

2016년 경상남도 하동군 땅밀림 지역의 지하구조와 미끄럼사면을 파악하기 위해 지구물리탐사(전기비 저항, 탄성파 굴절법, 시추공 영상촬영)와 사면안정해석을 실시하였다. 시추조사와 탄성파속도로 해석된 사면의 지층 및 지하구조는 20여 m의 두터운 퇴적층 밑에 구간에 따라 1 m보다 얇은 풍화암 및 연암이 각각 분포한다. 지표지질조사를 통하여 관찰된 인장균열의 지표흔적을 기준으로 시추공 BH-2에서 영상촬영을 수행하여 확인된 집중 파쇄대의 분포는 지하수면과 쌍극자배열 전기비저항 단면에서 해석된 활동연약대의 깊이와 잘 부합한다. 기반암 표면의 고비저항 돌출부는 연약대의 하부 진행을 막는 일종의 자연적인 받침대 역할을 하여 이것을 경계점으로 활동면이 미끄러지고 약간 위로 올라가는 휘어진 파괴면을 수반하는 땅밀림의 특성을 설명해준다. 활동연약대에 대한 사면안정해석에서 지하수면의 변동시켜가며 건기와 우기의 안전율을 계산한 결과 우기에 해당되는 0.89의 낮은 값은 지하수로 완전포화된 물질에 기인하는 바 조사지역의 사면은 호우 시 불안정한 사면으로 해석된다.