• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1067-1069
• /
• 1999

This paper presents a network reduction using weak coupling method. Weak coupling method of identifying coherent generator groups are proposed. The partitioning technique used in this paper is based on a property of sparse matrix factorization. When a matrix has been factorized, a system is divided into study area, boundary buses and external area. A reduction process for external system starts with the load bus elimination and coherent generator aggregation. An identification of coherent generator group, network partitioning and network reduction are presented.

• 한국자기학회지
• /
• 제12권4호
• /
• pp.143-148
• /
• 2002

일축이방성을 부여한 NiO/NiFe 박막을 제작하고 이들의 강한 교환결합력과 약한 교환결합력의 분포에 대하여 조사하였다. 제작된 시편들의 교환결합력의 크기는 VSM 측정과 이방성자기저항측정을 통하여 확인하였으며, 회귀분석법을 통하여 두 교환결합력의 상호관계를 조사하였다. NiO(60nm)/NiFe(10nm)시편의 경우 전체 교환결합력 중에서 차지하는 약한 교환결합력의 크기는 외부인가자장의 크기에 관계없이 일정한 비율($\alpha$=0.2~0.4)을 나타내었고 이는 약한 교환결합을 하는 영역이 일정하게 존재함을 보여준다. 교환결합력의 크기가 서로 다른 시편의 경우는 교환결합력의 크기가 작을수록 전체 교환결합력 중에서 차지하는 약한 교환결합력의 크기가 컸으며, 교환결합력의 크기가 증가할수록 그 비율이 감소하였다. 이는 약한 교환결합을 하는 영역이 일정하게 존재한다고 가정할 경우 전체의 평균 교환결합력의 크기가 감소함에 따라 그 비율이 증가한 것으로 해석할 수 있다. 따라서 NiO/NiFe 박막에서 강한 교환결합을 하는 영역과 약한 교환결합을 하는 영역이 일정하게 존재함을 알 수 있다.

• 한국전자파학회논문지
• /
• 제11권5호
• /
• pp.738-747
• /
• 2000

본 논문에서 낮은 주파수 영역에서는 약 결합된 meander line은 근사적으로 단일 전송선으로 취급할 수 있음을 증명하였다. 이 때 meander line의 특성 impedance는 이 meander line에서 coupling을 무시할 때 단일전송선의 특성 impedance와 같으며, 반면 이것의 등가길이는 coupling없이 계산된 길이에 비해서는 수축되는 것을 보았다. 얻어진 해석적 결과는 회로 simulation 결과와 비교되었으며 또한 EM simulation 결과와 비교결과 결과식은 약 결합시에는 잘 일치하는 것을 알 수 있었다.

• ETRI Journal
• /
• 제44권2호
• /
• pp.339-345
• /
• 2022

This article presents an investigation of the effects on a grounding system of wireless power transfer (WPT) when transmitting over relatively far distances, that is, up to 1.25 m. Conventional two-coil WPT systems are sufficiently commercialized in strong coupling range, but it is important to accomplish the long-range WPT in weak coupling range for further various applications. This system depends on the coupling effect between the two coils that the grounds of the transmitting and receiving coils should be completely separated. However, when evaluating the performance of two-coil systems with the instrument consisting of two ports and one common ground, undesirable problems occur in weak coupling ranges, for example, obtaining disagreeable transmission efficiency and degrading system stability/reliability. We investigate the problems of the leakage power from common ground systems and provide a practical solution to obtain a reliable WPT system by using an isolation transformer. The usefulness of this approach is that it is possible to achieve the stability of the system with relatively far transmitting distances and to determine the exact transmission efficiency.

• Journal of Magnetics
• /
• 제8권1호
• /
• pp.13-17
• /
• 2003

The longitudinal magnetooptical Kerr effect was used to analyse magnetic domains in soft magnetic ${(Fe_{97}A1_3)}_{85}N_{15}$/$Al_{2}O_{3}$ multilayers in order to get microscopic understanding of interlayer exchange coupling. The measuring system consists of a Kerr microscope, a CCIR camera (with an 8-bit framegrabber), 16 bit digital camera and computer system for real-time image processing and to control external magnetic field and cameras. The strength of ferromagnetic (EM) coupling as a function of the spacer thickness of $Al_2O_3$ was investigated. It was found that strong FM-coupling, strong uniaxial anisotropy and coherent rotation of the magnetization have been observed for the spacer thickness in the range of 0.2 nm $\leq$ t $\leq$ 1 m, however, weak FM-coupling, patch domains and $360^{\circ}$-walls occur for the spacer thickness of t = 2.5 nm. At a spacer thickness of t $\geq$ 5 nm transition takes place from weak FM-coupling to the decoupled state where complex interlayer interactions and different types of the domain walls were observed.

• 전자공학회논문지D
• /
• 제34D권1호
• /
• pp.41-48
• /
• 1997

Design rules of directional coupler optical switches are discussed in consideration of parasitic couplings in the bending section. The parasitic coupling phenomenon is analyzed based on the coupled-mode theory and the solutions are represented in the form of the transfer matrix. The modified switching conditions due to the parasitic coupling are derived and the resultant switching diagrams are illustrated. It is revealed that the parallel section's length needs to be adjustd less than the coupling length $l_c(=\pi/2\textsc{k}o)$ to obtain the desired crosstalk and that the adjustment depends on the strength of the parasitic coupling. However, it is discovered that, for weak parasitic coupling, the switching voltage does not need to be altered but may maintain the same value as if no parasitic coupling is taken into account.

• Coupled systems mechanics
• /
• 제5권2호
• /
• pp.145-156
• /
• 2016

An efficient and general numerical strategy for fluid-structure interaction problems is presented where either the fluid or the structure part are represented by nonlinear models. This partitioned strategy is implemented under the form of code coupling that allows to (re)-use previous made developments in a more general multi-physics context. This strategy and its numerical implementation is verified on classical fluid-structure interaction benchmarks, and then applied to the impact of tsunamis waves on submerged structures.

• 한국재료학회지
• /
• 제5권7호
• /
• pp.786-793
• /
• 1995

Ag를 $Y_1$Ba$_2$Cu$_3$O$_{7-y}$에 첨가하여 고상반응법으로 시료를 제작, Ag가 $Y_1$Ba$_2$Cu$_3$O$_{7-y}$의 고온초전도성과 그의 미세구조에 미치는 영향을 조사하였고 그에 따른 기계적 특성을 연구하였다. Ag의양이 증가함에 따라 결정립의 크기가 증가하였고 연결성이 향상되어 시료의 결정구조가 치밀해지고 단단해졌으며 결정립간의 weak link와 weak coupling을 줄이고 균일한 초전도 상을 형성시킨다는 것을 알 수 있었다. 또한 $Y_1$Ba$_2$Cu$_3$O$_{7-y}$결정구조의 이방성을 줄였고 $Y_1$Ba$_2$Cu$_3$O$_{7-y}$의 열적 안정성을 향상 시켰음을 알 수 있었다. 그리고 Ag의 첨가에 따라 시료의 기계적 강도가 증가함을 보였다.가함을 보였다.

• Journal of electromagnetic engineering and science
• /
• 제9권2호
• /
• pp.85-97
• /
• 2009

As operating frequency is raised and as more integration with active and passive elements is required, it becomes difficult to fabricate more than 120 ${\Omega}$ characteristic impedance of a mierostrip line. To solve this problem, an equivalent high impedance transmission-line section is suggested, which consists mainly of a pair of coupled-line sections with two shorts. However, it becomes a transmission-line section only when its electrical length is fixed and its coupling power is more than half. To have transmission-line characteristics(perfect matching), independently of coupling power and electrical length, two identical open stubs are added and conventional design equations of evenand odd-mode impedances are modified, based on the fact that the modified design equations have the linear combinations of conventional ones. The high impedance transmission-line section is a passive component and therefore should be perfectly matched, at least at a design center frequency. For this, two different solutions are derived for the added open stub and two types of high impedance transmission-line sections with 160 ${\Omega}$ characteristic impedance are simulated as the electrical lengths of the coupled-line sections are varied. The simulation results show that the determination of the available bandwidth location depends on which solution is chosen. As an application, branch-line hybrids with very weak coupling power are investigated, depending on where an isolated port is located, and two types of branch-line hybrids are derived for each case. To verify the derived branch-line hybrids, a microstrip branch-line hybrid with -15 dB coupling power, composed of two 90$^{\circ}$ and two 270$^{\circ}$ transmission-line sections, is fabricated on a substrate of ${\varepsilon}_r$= 3.4 and h=0.76 mm and measured. In this case, 276.7 ${\Omega}$ characteristic impedance is fabricated using the suggested high impedance transmission-line sections. The measured coupling power is -14.5 dB, isolation and matching is almost perfect at a design center frequency of 2 GHz, showing good agreement with the prediction.

• Advances in nano research
• /
• 제13권3호
• /
• pp.259-267
• /
• 2022

Two-dimensional (2D) transition metal carbides/nitrides or "MXenes" belong to a diverse-class of layered compounds, which offer composition- and electric-field-tunable electrical and physical properties. Although the majority of the MXenes, including Ti₃C₂T_x, are metallic, they typically show semiconductor-like behaviour in their percolated thin-film structure; this is also the most common structure used for fundamental studies and prototype device development of MXene. Magnetoconductance studies of thin-film MXenes are central to understanding their electronic transport properties and charge carrier dynamics, and also to evaluate their potential for spin-tronics and magnetoelectronics. Since MXenes are produced through solution processing, it is desirable to develop deposition strategies such as inkjet-printing to enable scale-up production with intricate structures/networks. Here, we systematically investigate the extrinsic negative magnetoconductance of inkjetprinted Ti₃C₂T_x MXene thin-films and report a crossover from weak anti-localization (WAL) to weak localization (WL) near 2.5K. The crossover from WAL to WL is consistent with strong, extrinsic, spin-orbit coupling, a key property for active control of spin currents in spin-orbitronic devices. From WAL/WL magnetoconductance analysis, we estimate that the printed MXene thin-film has a spin orbit coupling field of up to 0.84 T at 1.9 K. Our results and analyses offer a deeper understanding into microscopic charge carrier transport in Ti₃C₂T_x, revealing promising properties for printed, flexible, electronic and spinorbitronic device applications.