• 한국해안해양공학회지
• /
• 제13권4호
• /
• pp.263-272
• /
• 2001

최근 우리나라에서는 slit형 케이슨을 적용한 방파제 건설이 시도되고 있다. slit 케이슨 방파제는 수심이 비교적 깊은 해역에 적절하며, 다수의 실험적.이론적 연구가 수행되었다. 본 연구에서는 불규칙파를 적용한 2차원 수리모형실험을 실시하여 종 slit형 케이슨 방파제의 반사특성을 검토하였다. 실험은 단일 유수실과 이중 유수실을 가지는 종 slit형 케이슨 방파제에 대해 유공율, 유수실의 폭 및 slit의 수 등을 달리한 여러 가지 실험안을 설정하여 수행하였다. 실험결과에 의하면, 파형경사가 작을수록 반사율은 크게 나타남을 알 수 있다. 그리고 규칙파를 적용한 기존 연구결과에 의하면 상대유수실 폭 (B/L)이 0.2-0.25 부근에서 최소 반사율을 보였으나, 불규칙파를 적용한 본 연구에서는 B/L$_{s}$ ,=0.13~0.15 범위에서 최소의 반사율을 보였다. 또한 동일한 유공율 조건에서 slit의 폭이 클수록 반사율이 낮게 나타났으며, 전체적으로 단일 유수실보다 이중 유수실의 경우가 소파효과가 우수하였다.

• 대한토목학회논문집
• /
• 제14권3호
• /
• pp.619-633
• /
• 1994

천해역(淺海域)에서 굴절(屈折), 회절(回折) 및 쇄파(碎波)를 고려한 범용성(汎用性)있는 파랑변형모형(波浪變形模型)을 개발하였다. 기존(旣存)이 완경사방정식(緩傾斜方程式)으로부터 고차(高次)의 회절항(回折項)을 고려한 포물형근사방정식(抛物形近似方程式)을 유도하였으며, 난류모형(亂流模型)을 도입하여 저면마찰(底面摩擦) 및 쇄파(碎波)에 의한 에너지 감쇠항(減衰項)을 정식화(定式化)하였다. 본 모형(模型)의 수치해(數値解)는 Crank-Nicolson의 음해법(陰解法)으로 계산하였으며, 계산결과(計算結果)는 원형천퇴(圓形淺堆), 타원형천퇴(楕圓形淺堆) 및 쇄파대(碎波帶)에서의 여러가지 수리실험결과(水理實驗結果)와 비교하였다. 쇄파대(碎波帶)에서 파고감쇠양상(波高減衰樣相)은 입사파(入射波)의 파형경사(波形傾斜)에 따라 민감(敏感)하게 반응(反應)하였으며, 타원형천퇴(楕圓形淺堆) 주변(周邊)에서 비선형분산관계(非線型分散關係)와 에너지 감쇠효과(減衰效果)는 파고변화(波高變化)를 잘 설명하였다. 그리고 본 모형(模型)을 현지해안(現地海岸)에 적용하여 타당성(妥當性)있는 계산결과(計算結果)를 얻었다.

• 대한조선학회논문집
• /
• 제55권6호
• /
• pp.490-496
• /
• 2018

The consistency of the initially designed waves in the domain is essential for accurate calculation of the added resistance in waves through CFD. In particular, unwanted reflected waves at domain boundaries can cause incorrect numerical solutions due to the superposition with initially designed waves. Euler Overlay Method(EOM) is one of the methods for reducing wave reflections by adding an additional source term to momentum and phase conservation equations, respectively. In this study, we apply the Euler Overlay Method(EOM) to the open-source CFD library, OpenFOAM(R), to simulate the accurate free-surface waves in the domain and the parametric study is performed for efficient implementation of Euler Overlay Method(EOM). Considering that the damping efficiency depends on the selection of the overlay parameter in the added source terms, the size of overlay zone and the wave steepness, the influences of these factors are tested through the wave elevation measured at constant time intervals in the 2D numerical wave tank. Through this process, guidelines for selection of optimal overlay parameter and overlay zone size that can be applied according to the scaling law are finally presented.

• 한국해양공학회지
• /
• 제35권3호
• /
• pp.191-202
• /
• 2021

Studies on very large offshore structures are increasing owing to the development of deep sea, large-scale energy generation using ocean resources, and so on. The enlargement of offshore structures makes the hydroelastic effect and low natural frequency related responses important. Numerical analyses and model tests for hydroelastic and higher-order springing responses of fixed cylindrical structures are conducted in this study. The panel methods with and without the hydroelastic effect with shell elements, and the Morison analysis method with beam elements are applied. To observe the hydroelastic effect for structural strength, two structures are considered: bottom-fixed cylindrical structures with high and low bending stiffnesses, respectively. The surge motions at the top of the structure and bending stresses on the structure are observed under regular and irregular wave conditions. The regular wave conditions are generated considering the ratios of the cylindrical outer diameter to the wave lengths, and keeping the wave steepness constant. The model tests are performed in the three-dimensional ocean engineering basin in the KRISO (Korea Research Institute of Ships and Ocean Engineering). From the numerical and experimental results, in which the hydroelastic responses are only observed in the case of the structure with a low bending stiffness, it is confirmed that the hydroelastic responses are highly dependent on the structural stiffness. Additionally, the higher-order phenomenon on the specified wave condition is analyzed by observing the higher-order springing responses when the incident wave frequency or its multiples with the high wave height coincides with the natural frequency of the structure.

• 한국해안해양공학회지
• /
• 제16권4
• /
• pp.233-240
• /
• 2004

도파고를 산정하는 경험식을 도출하기 위하여 도파지점에서의 수리조건을 대표하는 수치를 적용한 새로운 무차원수인 파활동경사 $S_x$를 도입하였다. Saville(1958)의 실험자료에 기초하여 사면경사, 파형경사 등과 도파고비와의 관계를 도출하여 수심 구간별로 도파고를 산정할 수 있는 경험식을 제시하였다. 한편 Ahrens(1988) 관측자료와 Mase(1989) 실험자료를 이용하여 조도 영향을 고려하며 광범위한 경사조건에 적용할 수 있는 보다 일반성이 확보된 경험식을 도출하였다. Mase(1989)가 시도한 바와 같이 Iribarren 수를 도입한 경우에는 비선형관계가 유도되어 지수형 산정식이 도출된다. 이에 반하여 지점 파활동경사를 도입하였을 경우에는 단순히 선형 비례하는 간단한 일차식의 형태로 광범위한 수심과 경사 구간에 적용할 수 있는 경험식을 도출할 수 있었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권1호
• /
• pp.1-10
• /
• 2017

Various offshore structures such as FPSO, FSO, Semi-submersible, TLP and Spar are operated to develop offshore oil and gas fields. Most of the offshore structures shall be operated over 20 years under the harsh environments at sites so that the offshore structures should be designed to endure the harsh environments. In this study, the effect of the impact load (so called slapping load) by the steep waves acting on the FPSO bow is investigated through the model test. For measurement of the impact pressures on the frontal area, a bow-shaped panel was fabricated, and installed the pressure sensors on the bow starboard side of the model FPSO. During the model test campaign, the impact load was investigated using the steep waves with $Hs/{\lambda}$ greater than 1/16 of the representative wave condition. Consequently, it is confirmed through the model test that the impact loads acting on the FPSO bow are significantly increased with the steep waves ($Hs/{\lambda}$ > 1/16) than the representative wave conditions of a maximum significant wave height and a pitch forcing period. Therefore, for safe design of North Sea FPSO, it is necessary to consider the steep waves in addition to the representative wave conditions and to be applied as proper structural load. Also, the effect of random seeds in irregular waves should be considered to build the safe FPSO.

• 한국해양환경ㆍ에너지학회지
• /
• 제14권2호
• /
• pp.138-145
• /
• 2011

이 논문에서는 Monte Carlo method를 이용하여 주어진 파랑스펙트럼에서 위상차를 임의의 수 (random number)를 발생시켜 파형의 시계열 자료를 시뮬레이션하여 freak wave의 발생 특성을 살펴보았다. 여러 가지 상태의 해상상태를 스펙트럼법에서 정의한 유의파고 $H_s$와 유의파첨도 $S_s$의 조합을 이용해서 표시하였다. 유의파첨도가 동일한 경우에는 $H_s$가 커질수록 freak wave 발생 확률이 낮아지며 $H_s$가 동일한 경우 유의파첨도가 커질수록 freak wave 발생확률이 높아진다. 주어진 해상상태에서 최대파고 $H_{max}$의 평균은 $S_s$의 값이 증가함에 따라 조금씩 증가한다. 그러나 freak wave의 평균파고는 $S_s$에 관계없이 일정한 값을 가지며 freak wave 파고의 평균은 $H_s$의 2배가 된다. $S_s$가 일정한 경우 $H_s$가 증가하면 파형의 평균 첨도(kurtosis)가 증가한다. 그러나 $H_s$가 일정한 경우 $S_s$가 증가하면 첨도의 평균은 감소한다. Freak wave 발생 기준인 이상지수(Abnormality index, AI)의 평균값은 $H_s$와 $S_s$에 관계없이 2.11 정도의 값을 가지며 AI의 최대값은 2.5-3.0 사이의 값을 가진다. 따라서 Linear focusing에 의해서 발생한 freak wave의 AI의 상한 값은 3.0 정도라고 추정할 수 있다.

• International Journal of Ocean System Engineering
• /
• 제3권4호
• /
• pp.188-208
• /
• 2013

The motion response of floating structures should be adequately low to permit the operation of rigid risers along with dry well heads. Though Spar platforms have low heave responses under lower sea state, could become unacceptable in near resonance region of wave periods. Hence the hydrodynamic response, heave in particular, must be examined to ensure that it is minimized. To reduce heave motions, external damping devices are introduced and one such effective damping device is heave plate. Addition of heave plate can provide additional viscous damping and additional added mass in the heave direction which influence the heave motion. The present study focuses on the influence of heave plate on the hydrodynamic responses of Classic Spar in regular waves. The experimental investigation has been carried out on a 1:100 scale model of Spar with single and double heave plates in regular waves. Numerical investigation has been carried out to derive the hydrodynamic responses using ANSYS AQWA. The experimental results were compared with those obtained from numerical simulation and found to be in good agreement. The influence of disk diameter ratio, wave steepness, pretension in the mooring line and relative spacing between the plates on the hydrodynamic responses of Spar are evaluated and presented.

• Ocean Systems Engineering
• /
• 제5권2호
• /
• pp.109-123
• /
• 2015

In the present study, the coupled dynamic response of a Submerged Floating Tunnel (SFT) and mooring lines under regular waves is solved by using two independent numerical simulation methods, OrcaFlex and CHARM3D, in time domain. Variations of Buoyancy to Weight Ratio (BWR), wave steepness/period, and water/submergence depth are considered as design and environmental parameters in the study. Two different mooring-line configurations, vertical and inclined, are studied to find an optimum design in terms of limiting tunnel motions and minimizing mooring-line tension. The numerical results are successfully validated by direct comparison against published experimental data. The results show that tunnel motions and tether tensions grow with wave height and period and decrease with submergence depth. The inclined mooring system is more effective in restricting tunnel motions compared to the vertical mooring system. Overall, the present study demonstrates the feasibility of this type of structure as an alternative to traditional bridges or under-seabed tunnels.

• Ocean Systems Engineering
• /
• 제10권1호
• /
• pp.1-23
• /
• 2020

Hydrodynamic Drag of Surface combatants pose significant challenges with regard to fuel efficiency and exhaust emissions. Stern flaps have been used widely as an energy saving device, particularly by the US Navy (Hemanth et al. 2018a, Hemanth Kumar and Vijayakumar 2018b). In the present investigation the effect of flap turning angle on drag reduction is numerically and experimentally studied for a high-speed displacement surface combatant fitted with a stern flap in the Froude number range of 0.17-0.48. Parametric investigations are undertaken for constant chord length & span and varying turning angles of 5° 10° & 15°. Experimental resistance values in towing tank tests were validated with CFD. Investigations revealed that pressure increased as the flow velocity decreased with an increase in flap turning angle which was due to the centrifugal action of the flow caused by the induced concave curvature under the flap. There was no significant change in stern wave height but there was a gradual increase in the stern wave steepness with flap angle. Effective length of the vessel increased by lengthening of transom hollow. In low Froude number regime, flow was not influenced by flap curvature effects and pressure recovery was marginal. In the intermediate and high Froude number regimes pressure recovery increased with the flap turning angle and flow velocity.