• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.568-572
• /
• 2000

This paper describes the experimental results of a transient impedance characteristics of grounding rods to a square pulse and standard lightning impulse current. The test were performed on single grounding rod($\phi$ 10mm, 1m) and triple-grounding rods( $\phi$ 10mm, 1m) of equilateral triangles with 5m spacing. For measurements of transient impedance, a pulse generator which can produce square wave of 30ns rise time and 20U Pulse duration was designed and fabricated. In the experiment, transient impedance of the grounding systems have been investigated from the recorded potential and current waveforms. The results showed that the value of the transient impedance is quite higher than the stationary resistance, and provide useful information for the value of a grounding system considered transient characteristics under a high frequency condition such as lightning stokes and ground-fault.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.194-195
• /
• 2006

This study evaluated the impedance characteristics of earth termination system and developed a variable frequency-typed inverter (measuring tool) for the utilization in ground design for lightning protection. The variable-frequency-typed inverter were composed of rectification part, voltage adjuster, IGBT controller and measuring part. Meanwhile, the square wave signal of variable frequency converted its frequency up to lightning surge band by using an IGBT after rectifying an alternating current (AC). It conducted performance evaluation of ground impedance of actual earth termination system by using the developed measuring tool for ground impedance and confirmed that such impedance-oriented performance evaluation was effective in the design of lightning protection.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.393-396
• /
• 2006

This letter proposes a new impedance matching scheme of a traveling wave electro-absorption modulator (TWEAM) module for a 60 GHz band radio-over-fiber (ROF) link. A microstrip band pass filter (BPF) was used to achieve impedance matching at the 60 GHz band, and termination resistance was carefully designed to obtain an input impedance close to $50\;{\Omega}$. Also, a bias circuit for the device was designed in the module. The measured return loss and frequency response show that the modulator module observes the characteristics of a filter without the need of a further tuning process.

• Journal of Acupuncture Research
• /
• v.36 no.1
• /
• pp.21-27
• /
• 2019

Background: The intelligent tissue hypothesis holds that an organ's states (be it normal function or stressed states) are reflected in real time at its related acupuncture points (acupoints), causing physical, real-time changes in the local tissue. The experiment was devised to test this. Methods: The patient drank chilled water while the impedance at 6 stomach-related acupoints was monitored in real time (sample rate of 1 kHz). Any changes in the local tissue at the acupoints ought to be reflected in changes in the impedance. Results: The impedance at every test acupoint showed a response to the chilled water being ingested. Also, the duodenal pacesetter and the stomach's slow waves were clearly visible in the impedance pattern at all the acupoints. Conclusion: Hence, many separate details of the stomach's function were reflected at these acupoints. The duodenal features were consistent with the traditional indications for these acupoints, which are noted to be able to treat intestinal conditions. Therefore, the results were consistent with the hypothesis and also provided a possible explanation for how the use of these acupoints is able to treat intestinal conditions.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1984.12a
• /
• pp.42-44
• /
• 1984

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.353-357
• /
• 2007

We have been setting up experiments on propagation of shock waves generated by the pulsed laser ablation. One side of a thin metal foil is subjected to laser ablation as a shock wave propagates through the foil. The shock wave, which penetrates through the foil is reflected by an acoustic impedance which causes the metal foil to high-strain rate deform. This short time physics is captured on an ICCD camera. The focus of our research is applying shock wave and deformation of the thin foil from the ablation to accelerating micro-particles to a very high speed.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.1-6
• /
• 1996

This study was performed to investigate the feasibility of using sonic stress-wave technique in the longitudinal direction for the assessment of incipient decay of radiata pine wood. Decayed bending specimens by Tyromyces palustris and Gloeophyllum trabeum for varoious periods were tested nondestructively using stress-wave technique in the longitudinal direction and destructively. Decay detection, quantitative assessment of decay, and the prediction of residual strength of decayed wood with less than five percent weight loss can be feasible using stress-wave parameters (wave velocity, wave impedance, stress-wave elasticity) measured by stress-wave technique in the longitudinal direction and their percent reduction due to decay.

• Smart Structures and Systems
• /
• v.29 no.2
• /
• pp.279-286
• /
• 2022

In this article, a novel propagation formulation of Rayleigh waves in a compressible isotropic half-space with impedance boundary condition is proposed by embedding the normal stress. In a two-dimensional case, it is assumed that a design boundary is free of normal traction and a shear traction depends on linearly a normal component of displacements multiplied by frequencies. Therefore, impedance boundary conditions affect the normal stress, where the impedance parameters correspond to dimensions of stresses over velocity. On the other hand, vanished impedance values are traction-free boundary conditions. The main purpose of this article is to present theoretically the existence and uniqueness of a Rayleigh wave formulation relying on secular equation's mathematical analyses. Its velocity varies along with the impedance parameters. Moreover, numerical experiments with different values for the velocity of Rayleigh waves are carried out. The present Rayleigh waves study is a fundamental step in analyzing the cause and effect of physical states such as building or structure damages resulting from natural dynamics. The results of the study generate a basic design formulation theory to test the effects of Rayleigh waves affecting structures when an earthquake occurs. The presence and uniqueness of the proposed formulation is verified by mutual comparisons of several numerical examples.

• Journal of electromagnetic engineering and science
• /
• v.10 no.1
• /
• pp.13-17
• /
• 2010

In this paper, we have described a simple CPW-fed UWB antenna for wireless UWB communication. The proposed antenna consists of two symmetrical strips having two steps and CPW feeding. Two techniques(symmetrical structure, two steps) are used to produce good low-dispersion and impedance matching. The proposed UWB antenna has an omni directional radiation pattern, compact size, low dispersion, and low cost.

• Journal of electromagnetic engineering and science
• /
• v.6 no.4
• /
• pp.197-202
• /
• 2006

This paper presents a study on the differential signaling for the rectangular power-bus structure. The full-wave modal analysis method analyzes how the differential-signaling can lower the power-bus resonance noise levels. The methodology is validated by the use of the FDTD method and reference measurements.