• 제목/요약/키워드: wave finite element method

검색결과 565건 처리시간 0.027초

점성감쇠기를 이용하는 흡수경계의 성능 향상에 관한 연구 (A Study on Improving the Capacity of Absorbing Boundary Using Dashpot)

  • 김희석;이종세
    • 한국전산구조공학회논문집
    • /
    • 제20권5호
    • /
    • pp.629-640
    • /
    • 2007
  • 본 논문에서는 무한영역을 유한의 요소영역으로 표현하는데 있어서 가장 폭넓게 사용되는 점성감쇠기를 이용한 흡수경계의 성능을 향상시키기 위한 연구를 수행하였다. 2차원 평면조화파동방정식을 이용하여 응력파의 경계면으로의 입사각에 따른 흡수경계조건을 최적화 하였으며, Miller 등이 제안한 반무한 탄성체에서의 주기하중에 의한 전파식을 최적화된 점성감쇠기를 이용한 흡수경계 조건식에 삽입한 후 방정식의 해를 직접 비교함으로서 해석적인 검증을 수행하였다. 또한 수치적 검증을 위해 유한요소법을 사용하여 Miller 등의 파진행 문제를 구현하였으며, 이때 흡수경계를 구현하기 위해 점성감쇠기를 부착시킨 수치모형에서의 변위와 파의 도달시간을 고려하여 반사파의 영향을 제거시킨 수치모형에서의 변위를 비교함으로써 흡수율을 산정하였다. 흡수율은 수치모형의 경계와 내부점에 대해 각각 산정되었으며 이를 통해 수치적 검증을 수행하였다.

Inner Beam의 두께비 및 높이비가 LMTT용 Shuttle Car의 Frame 강도 및 강성에 미치는 영향 (DThe Effect of Thickness Ratio and Hight Ratio of Inner Beam on Strength and Stiffness of Frame in Shuttle Car for LMTT)

  • 한동섭;한근조;이권순;심재준;김태형
    • 한국항해항만학회지
    • /
    • 제28권3호
    • /
    • pp.207-211
    • /
    • 2004
  • LMTT(Linear Motor-based Transfer Technology)는 항만 자동화를 위한 컨테이너 터미널용 수평 이송 장치이며, rail과 shuttle car(mover)에 부착된 stator module로 구성된 PMLSM(Permanent Magnetic Linear Synchronous Motor)에 의해 구동된다. 본 논문은 inner beam과 outer beam의 높이비가 LMTT용 shuttle car의 frame 강도 및 강성에 미치는 영향을 살펴보았다. 설계변수는 inner beam의 단면형상 및 높이비로 설정하였으며, 유한요소해석을 통하여 설계변수가 frame의 강도 및 강성에 미치는 영향을 살펴보았다.

Reduced wavelet component energy-based approach for damage detection of jacket type offshore platform

  • Shahverdi, Sajad;Lotfollahi-Yaghin, Mohammad Ali;Asgarian, Behrouz
    • Smart Structures and Systems
    • /
    • 제11권6호
    • /
    • pp.589-604
    • /
    • 2013
  • Identification of damage has become an evolving area of research over the last few decades with increasing the need of online health monitoring of the large structures. The visual damage detection can be impractical, expensive and ineffective in case of large structures, e.g., offshore platforms, offshore pipelines, multi-storied buildings and bridges. Damage in a system causes a change in the dynamic properties of the system. The structural damage is typically a local phenomenon, which tends to be captured by higher frequency signals. Most of vibration-based damage detection methods require modal properties that are obtained from measured signals through the system identification techniques. However, the modal properties such as natural frequencies and mode shapes are not such good sensitive indication of structural damage. Identification of damaged jacket type offshore platform members, based on wavelet packet transform is presented in this paper. The jacket platform is excited by simple wave load. Response of actual jacket needs to be measured. Dynamic signals are measured by finite element analysis result. It is assumed that this is actual response of the platform measured in the field. The dynamic signals first decomposed into wavelet packet components. Then eliminating some of the component signals (eliminate approximation component of wavelet packet decomposition), component energies of remained signal (detail components) are calculated and used for damage assessment. This method is called Detail Signal Energy Rate Index (DSERI). The results show that reduced wavelet packet component energies are good candidate indices which are sensitive to structural damage. These component energies can be used for damage assessment including identifying damage occurrence and are applicable for finding damages' location.

High Contrast Grating 구조체를 이용한 빛의 제어

  • 김준영;연규혁;김지훈;조운조;김영동;송진동
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.426.2-426.2
    • /
    • 2014
  • Wavefront control은 렌즈, 거울 등을 포함한 많은 광학소자를 대체할 수 있는 기술이며, 이는 광 직접 소자 개발에 매우 유용하다. 기존의 Distributed bragg reflector (DBR) 구조의 경우 lattice mismatch, 낮은 효율, 작은 굴절률 차이의 물질만을 사용해야 하는 문제 등으로 광 직접 소자에의 적용에는 한계가 있다. 본 연구에서는 이러한 한계점을 극복하고, 더 나아가 광학소자 구조 내에서의 빛의 거동을 조절하기 위해서 High-index contrast grating (HCG), 즉, 큰 굴절률 차이가 나는 물질로 이루어진 격자 구조 내의 빛이 가지는 waveguide 특성에 대한 연구가 수행되었다. 굴절률 차이가 큰 물질을 sub-wavelength의 주기적인 혹은 비주기적인 격자 구조로 만듦으로써 투과된 빛의 투과도와 위상 등을 조절할 수 있고 이를 통해 빛의 초점 거리, 휘어짐을 조절 할 수 있다. HCG 구조 내의 빛의 거동을 Rigorous coupled wave analysis (RCWA) 및 Finite element method (FEM) 계산을 이용하여 시뮬레이션 하였다. RCWA 계산을 통해 주기 격자구조의 투과도 및 반사도, 빛의 위상을 계산하여 비주기를 갖는 전체적인 HCG 구조를 결정하였고, FEM 계산을 통하여 그 구조 내에서 빛의 거동을 시뮬레이션 하였다. 1,300 nm 파장의 빛이 광원으로 사용되었고 시뮬레이션을 위해 낮은 굴절률의 물질로 ITO, 높은 굴절률의 물질로는 Si이 사용되었다. $15{\mu}m$ 포커싱, $7.91^{\circ}$의 휘어짐을 시뮬레이션 하였고, 실제 소자 공정을 하여 제작한 후, 광 측정 결과 포커싱은 $15{\mu}m$, 휘어짐은 $4.5{\sim}6.5^{\circ}$를 확인하였다. 이러한 결과를 바탕으로 HCG구조체를 통하여 빛의 엔지니어링이 가능함을 알 수 있었다. HCG구조체는 빛이 투과하는 광학 소자의 전반에 적용이 가능하며 더 나아가 인위적인 빛의 엔지니어링이 가능함을 시사한다.

  • PDF

Soil-structure-foundation effects on stochastic response analysis of cable-stayed bridges

  • Kuyumcu, Zeliha;Ates, Sevket
    • Structural Engineering and Mechanics
    • /
    • 제43권5호
    • /
    • pp.637-655
    • /
    • 2012
  • In this study, stochastic responses of a cable-stayed bridge subjected to the spatially varying earthquake ground motion are investigated by the finite element method taking into account soil-structure interaction (SSI) effects. The considered bridge in the analysis is Quincy Bay-view Bridge built on the Mississippi River in between 1983-1987 in Illinois, USA. The bridge is composed of two H-shaped concrete towers, double plane fan type cables and a composite concrete-steel girder deck. In order to determine the stochastic response of the bridge, a two-dimensional lumped masses model is considered. Incoherence, wave-passage and site response effects are taken into account for the spatially varying earthquake ground motion. Depending on variation in the earthquake motion, the response values of the cable-stayed bridge supported on firm, medium and soft foundation soil are obtained, separately. The effects of SSI on the stochastic response of the cable-stayed bridge are also investigated including foundation as a rigidly capped vertical pile groups. In this approach, piles closely grouped together beneath the towers are viewed as a single equivalent upright beam. The soil-pile interaction is linearly idealized as an upright beam on Winkler foundation model which is commonly used to study the response of single piles. A sufficient number of springs on the beam should be used along the length of the piles. The springs near the surface are usually the most important to characterize the response of the piles surrounded by the soil; thus a closer spacing may be used in that region. However, in generally springs are evenly spaced at about half the diameter of the pile. The results of the stochastic analysis with and without the SSI are compared each other while the bridge is under the sway of the spatially varying earthquake ground motion. Specifically, in case of rigid towers and soft soil condition, it is pointed out that the SSI should be significantly taken into account for the design of such bridges.

수중폭발에 의한 해중철도의 간이 충격 응답 해석 (Simplified Shock Response Analysis for Submerged Floating Railway against Underwater Explosion)

  • 서승일;사공명;손승완
    • 한국철도학회논문집
    • /
    • 제17권2호
    • /
    • pp.100-105
    • /
    • 2014
  • 해중철도 부근에서 테러나 사고에 의해 수중폭발이 발생하였을 경우, 함체에 치명적인 손상을 가할 수 있으므로, 충분한 강도를 확보해야 한다. 본 연구에서는 설계 목적으로 해중철도 인근에서 수중폭발이 발생한 경우, 경험에 기초한 공식을 이용하여 충격압을 추정하고, 충격압에 의한 해중철도의 응답을 해석할 수 있는 간이 해석 방법을 제안하였다. 해중철도 함체를 탄성 지지된 보로 이상화하고, 초기 최대 충격압이 작용하는 보에 대해 정적 유한요소해석을 실시한 후, 동하중 계수와 조합함으로 최대 변위 및 굽힘 모멘트를 계산한다. 간이해석 결과는 상용 유한요소해석 소프트웨어를 이용한, 시간에 따른 과도응답해석 결과와 비교하여 양호한 일치를 보임을 확인하였다.

Seismic isolation of nuclear power plant based on layered periodic foundation

  • Mi Zhao;Qun Chen;Junqi Zhang;Xiuli Du
    • Earthquakes and Structures
    • /
    • 제24권4호
    • /
    • pp.259-274
    • /
    • 2023
  • In this paper, mechanical properties of periodic foundation made of concrete and rubber are investigated by a parametric study using the finite element method (FEM). Periodic foundation is a special type of seismic isolation foundation used in civil engineering, which is inspired by the meso-scale structure of phononic crystals in solid-state physics. This type of foundation is capable of reducing the seismic wave propagating though the foundation, therefore providing additional protection for the structures. In the FEM analysis, layered periodic foundation is frequently modelled due to its simplicity in numerical modeling. However, the isolation effect of periodic foundation on nuclear power plant has not been fully discussed to the best knowledge of authors. In this work, we construct four numerical models of nuclear power plant with different foundations to investigate the seismic isolation effects of periodic foundations. The results show that the layered periodic foundation can increase the natural period of the nuclear power plant like traditional base isolation systems, which is beneficial to the structures. In addition, the seismic response of the nuclear power plant can also be effectively reduced in both vertical and horizontal directions when the frequencies of the incident waves fall into some specific frequency bandgaps of the periodic foundation. Furthermore, it is demonstrated that the layered periodic foundation can reduce the amplitude of the floor response spectrum, which plays an important role in the protection of the equipment.

SPT 업홀기법을 이용한 지반의 2차원 전단파 속도 분포 도출 (Evaluation of near surface Vs distribution by using SPT uphole method)

  • 김동수;방은석;김종태
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2005년도 제7회 특별심포지움 논문집
    • /
    • pp.93-116
    • /
    • 2005
  • 기존 1차원 SPT 업홀 기법의 개선을 통하여 지반의 2차원적인 전단파 속도 분포를 경제적으로 도출하고자 하였다. 다수의 감지기를 사용하여 SPT 업홀 시험을 수행하고 시추공-지표면 조합의 주시 토모그래피 역산을 수행하게 되면 시추공 주변 지반에 대해 삼각형 형태의 전단파 속도 분포를 도출할 수 있다. 이러한 SPT 업홀 토모그래피 기법의 중요한 요소로는 정확한 전단파 성분의 도달시간 정보 획득 및 검증된 토모그래피 역산 프로그램의 적용이라 할 수 있다. SPT 업홀 기법에 대한 유한요소 수치해석을 통하여 수직 수평 입자 움직임의 크기합을 활용하여 도달시간 정보를 산출하는 것이 객관적이며 가장 정확한 결과를 주는 것으로 나타났다. 그리고 다양한 지반 모델에 대해 가상의 SPT 업홀 기법 수행을 통해 산출된 이론적 도달시간 정보로 토모그래피 역산 프로그램인 GeoTomCG를 사용하여 2차원 속도부포를 도출하여 봄으로써 GeoTomCG 프로그램의 신뢰성에 대해 검증하였다. 최종적으로 상향 및 하향으로 경사진 지반 모델에 대한 SPT 업홀 수치해석 모델링을 통해 지표면에서의 속도 시간 이력곡선을 획득하였고 도달시간 정보 획득 및 토모그래피 기법을 수행하여 그 결과를 수치모델 입력값과 비교해 봄으로써 SPT 업홀 기법의 2차원 적용 가능성을 확인하였다. 마지막으로 김제 지역의 풍하토 지반에서 SPT 업홀 시험을 수행하여 획득한 도달시간 정보를 이용하여 토모그래피 기법을 수행, 그 결과를 SPT-N값 등의 시추 자료와 비교하여 SPT 업홀 토모그래피 기법의 현장 적용성을 확인하였다.

  • PDF

발파작업 시 충전매질에 따른 발파효과 비교 연구 (A Comparative Study on the Effect of Tamping Materials on the Impact Efficiency at Blasting Work)

  • 배상수;한우진;장승엽;방명석
    • 한국지반신소재학회논문집
    • /
    • 제21권2호
    • /
    • pp.57-65
    • /
    • 2022
  • 본 연구에서는 폭약과 발파공 사이의 충전매질을 통한 충격파 전파 효과를 수치적으로 시뮬레이션하고 검증하였다. 고체(Lagrangian)와 유체(Eulerian)를 혼합 모델링하기 위해 Arbitrary Lagrangian-Eulerian(ALE) 방법을 선택하였다. 시간의존적 해석은 발파공정 시간 동안 수행되었다. 폭약과 매질(공기 또는 물)을 유한 요소망으로 모델링하였고, 발파공은 시작점(폭약)에서 발파공벽에 도달하는 전파 속도와 충격력을 결정할 수 있는 강체로 가정하였다. 해석결과에 따르면 물의 전파속도와 충격력은 공기의 경우보다 컸다. 추가로 발파 작업의 실제 현장을 모델링하고 시뮬레이션하였다. 암석은 탄소성체로 가정하였다. 해석결과에 따르면 충전매질이 물인 경우 순간 충격력이 더 크고, 파쇄블록 크기는 더 작은 것으로 나타났다. 반면 발파공배면에서의 충격량은 물인 경우에 더 작았는데, 이는 파쇄에 충격에너지가 상당부분 사용되고, 파쇄로 인한 감쇠 효과에 의해 주변의 고체를 통한 압력 전파는 공기보다 작아지기 때문이다. 이로써 충전매질로서 물이 공기보다 경제성이 더 높다는 것이 입증되었다.

수중에서 정방형 격자를 갖는 2차원 포노닉 크리스탈의 음향 밴드 구조 (Acoustic Band Structures in Two-dimensional Phononic Crystals with a Square Lattice in Water)

  • 김윤미;이강일;강휘석;윤석왕
    • 한국음향학회지
    • /
    • 제34권5호
    • /
    • pp.335-342
    • /
    • 2015
  • 포노닉 크리스탈이란 기저물질 내에 주기적으로 배열된 산란체로 구성된 복합물질로서 포노닉 크리스탈에 입사된 음파가 특정 주파수 대역에서 차단되는 현상인 밴드 갭이라는 중요한 특성을 갖는다. 본 연구에서는 수중에서 산란체로서 1 mm의 직경을 갖는 원기둥 형태의 스테인리스 스틸 막대가 1.5 mm의 격자상수를 가지며 정방형으로 배열된 2차원 포노닉 크리스탈의 음향 밴드 구조를 이론 및 실험적으로 고찰하였다. 2차원 포노닉 크리스탈의 밴드 구조를 예측하기 위해 유한요소법을 이용하여 첫째 브릴루앙 영역의 ${\Gamma}X$ 방향에 대해 주파수와 파동벡터에 대한 분산관계를 계산하였다. 초음파가 입사되는 방향과 수직한 스테인리스 스틸 막대 층의 개수를 1, 3, 5, 7, 9개로 변화시켜가며 투과계수 및 반사계수를 측정하였다. 계산된 분산관계로부터 2 MHz 이하의 주파수 대역에서 5개의 밴드 갭이 존재하는 것으로 예측되었으며, 첫째 밴드 갭은 0.5 MHz를 중심으로 나타났다. 투과계수 및 반사계수로부터 실험적으로 확인된 밴드 갭은 분산관계로부터 예측된 밴드 갭과 잘 일치하는 것으로 나타났다.