• 폴리머
• /
• 제33권1호
• /
• pp.45-51
• /
• 2009

BA와 MMA 그리고 1$\sim$5 wt%/monomer의 다양한 관능성 단량체(AA, 2-HEMA, GMA, AAm)를 사용하여 수용성 아크릴계 점착제를 중합하였다. 점착박리강도를 향상시키기 위해 대기압 평판형 플라즈마 전처리 방식을 피착제에 사용하였다. 관능성 단량체 종류에 따라 AA>2-HEMA>GMA>AAm의 순으로 높은 점착박리강도를 나타내었다. 유지력은 관능성 단량체의 함량이 증가함에 따라 열적 성질이 증가하여 전체적으로 AA>AAm>GMA>2-HEMA순으로 우수한 유지력을 나타내었다. 피착면에 평판형 플라즈마 전처리 방식을 적용한 결과 AA 9.1%, 2-HEMA 9.4%, GMA 9.4%, AAm 1.8%의 후기점착박리강도 증가를 확인할 수 있었다. 결론적으로, 다양한 관능성 단량체와 플라즈마 표면 처리법을 사용하여 점착박리강도, 유지력과 같은 기계적 물성을 조절할 수 있었다.

• 대한화학회지
• /
• 제58권3호
• /
• pp.338-341
• /
• 2014

• 한국염색가공학회지
• /
• 제9권1호
• /
• pp.1-14
• /
• 1997

Nylon 6 grafted with polyacrylamide(PAAm) was synthesized by a dispersion polymerization method at 6$0^{\circ}C$ for 2 hours, and a cresol-soluble graft polymer(CSGP) and water-dispersable graft polymer (WI)GP) were separated. Infra-red(IR) spectrum analysis, differential scanning calorimetery(DSC), thermogravimetery(TG), and X-ray diffraction analysis were carried out to research their structural characteristics.

• 한국세라믹학회지
• /
• 제30권2호
• /
• pp.139-147
• /
• 1993

Two sheets of high strength cement paste using ordinary Portland cement and water soluble polymer (polyacrylamide) were made by kneading with a twin roll mill. A carbon fiber layer out between two sheet of the cement paste, and then carbon fiber reinforced high strength cement composites were prepared by pressing them. The mechanical properties of the composites were investigated through the observation of the microstructure and the application of fracture mechanics. When the carbon fiber was added with 0.2 and 0.3wt% to the composites the flexural strength and Young's modulus were about 110∼116MPa and 74∼77GPa respectively, and critical stress intensity was about 3.14MPam1/2. It can be considered that the strength improvement of high strength cement fiber composites may be due to the removal of macropores and the increase of various fracture toughness effects; grain bridging, frictional interlocking, polymer fibril bridging and fiber bridging.

• Archives of Pharmacal Research
• /
• 제12권3호
• /
• pp.191-195
• /
• 1989

The release of progesterone from monolithic devices composed of different ratios of polyethylene oxide (PEO; mw 20, 000) and hydrophobic polydimethylsiloxane was investigated. Water soluble PEO soaked into the polymer provided controlled release of progesterone. The release rate of progesterone could be controlled by varying the contents of PEO and progesterone in soaking solution. The progesterone release rate from silicone devices increased as the content of PEO in devices increased, while it decreased as the content of PEO in soaking solution increased. The release rate may be made by simple alterations of geometry of devices controlled swelling and the change in the physical structure of polymer network. Hydrophobic polydimethylsiloxane containing PEO and progesterone can provide a contraceptive material for prolonged release of progesterone.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.74-75
• /
• 2003

Recently, people are gradually concerned about environmental issue, bionics, environmental-friendly or biocompatible materials. Poly(vinyl alcohol) (PVA) is suitable for these materials, because it is typically water-soluble polymer that have linear-flexible chains, a material of no toxicity for human, and biodegradable polymer[1]. One of the most effective factors that dominate the properties of PVAs is tacticity. (omitted)

• 약학회지
• /
• 제48권1호
• /
• pp.82-87
• /
• 2004

Mungbean trypsin inhibitor (MBTI) was isolated and purified from Mung bean which has been used as a galenic and traditional food. MBTI and poly(ethylene glycol) were conjugated by using water soluble carbodiimide. We evaluated the therapeutic value of the MBTI and MBTI-PEG conjugate using animal models, sublethal septic shock model in guinea pig caused by pseudomonal elastase, shock model in rat caused by lipopolysaccharide, and the vascular permeability test by using pseudomonal elastase. In two shock model in guinea p Is and in rat, hypotesion shock was inhibited by pretreatment of MBTI. And also the vascular permeability caused by pseudomonal elastase reduced by pretreatment of MBTI. Also, therapeutic value of the MBTI-PEG conjugate was evaluated by using the sublethal septic shock model caused by pseudomonal elastase. The MBTI-PEG conjugate was more effective than native MBTI against pseudomonal elastase induced septic shock in guinea pig model.

• Journal of Pharmaceutical Investigation
• /
• 제20권1호
• /
• pp.13-18
• /
• 1990

Hydrocortisone (HC) sustained-release suppositories were prepared by using a solid matrix of methacrylic acid-methacrylic acid methyl ester copolymer $(Eudragit\;L_{100}^{R}:\;EL)$ as a poorly water soluble carrier and polyethylene glycole 1540 (PEG) as an water soluble carrier. HC release rate was controlled by complexation with ${\beta}-cyclodextrin$ $({\beta}-CyD)$ which was confirmed by X-ray diffractometry, IR-spectroscopy and differential scanning calorimetry. Release rate of HC from the EL-PEG matrix suppositories decreased with increase of EL contents. The release rale from $HC-{\beta}-CyD$ complex decreased in the following order: $HC-{\beta}-CyD/PEG$ > HC/PEG > $HC-{\beta}-CyD/EL_{10%}-PEG$ > $HC/EL_{10%}-PEG$ > $HC-{\beta}-CyD/EL_{15%}-PEG$ > $HC/EL_{15%}-PEG$ > $HC-{\beta}-CyD/EL_{20%}-PEG$ > $HC/EL_{20%}-PEG$. The crystallinity of HC in polymer matrix was identified using X-ray diffractometer and the surface of matrix suppositories after release test was examined by scanning electron microscopy. The sustained release of HC from these matrix suppositories was attributed to the network structure of EL.

• Bulletin of the Korean Chemical Society
• /
• 제14권5호
• /
• pp.574-578
• /
• 1993

Laser-induced photoacoustic spectroscopy (LIPAS), which utilizes the photothermal effect that results from nonradiative relaxation of excited state molecules, was used in the speciation analysis of the complexes of neodymium(III) and water soluble synthetic polyelectrolyte, poly methacrylic acid (PMAA), in 0.1 M $NaClO_4$ at pH of 6.0. The minimum detection limit of Nd(III) by LIPAS was $5.O{\times}10^{-6}$ M. Experiment was carried out at low concentration ratio of Nd(III) to PMAA to assure that 1 : 1 complexes predominate. The bound and free Nd(III) species were characterized by measuring nonradiative relaxation energy of the excited states $(^2GM{7/2}\;and\;^4G_{5/2})$ to the metastable state $(^4G_{3/2})$. Two species were quantified by deconvolution of the mixed spectrum using their respective reference spectra. The conditional stability constant measured by LIPAS was 5.52 L$mol^{-1}$.

• 접착 및 계면
• /
• 제2권4호
• /
• pp.10-23
• /
• 2001

생성을 목적으로 하는 그라프트 중합체를 유화제로 하여 유화 그라프트중합을 실시하는 경우는 대체로 그라프트 효율 및 % 골격(backbone) 중합체의 전환율 값은 높으나, 메칠메타아크릴레이트(MMA) 전환율 및 % 그라프트율값 들이 낮다. 이와 같은 결점을 보완하기 위하여 중합계에 비 수용성 용매 및 수용성 용매를 사용하여서 이들 용매의 각각의 효과 및 두종의 용매를 조합한 복합효과 그리고 용매 공존하에서의 교반속도의 영향을 고찰하는 한편, 고분자 유화제의 조성에 따른 MMA의 유화용량, 평균 입경 및 그라프트된 알긴산의 입자 표면 밀도 등을 조사하여 그 중합 메카니즘을 고찰하였다. 그 결과, 고분자 유화제의 그라프트된 폴리메칠메타아클레이트(PMMA) 함량이 클수록 중합체 콜로이드의 MMA 유화용량 및 평균입경은 커지는 반면, 입자 표면의 그라프트된 알긴산의 밀도는 감소하였다. 비 수용성 용매를 MMA에 혼합시켜 중합시키는 경우는 그라프트 효율 및 골격 중합체의 전환율 값들의 저하없이 MMA 전환율 및 % 그라프트 값을 향상 시킬 수 있었으며, 그 효과는 PMMA에 대하여 침전제가 되는 용매가 양용매인 용매에 비하여 컸다. 수용성 용매는 그라프트 효율, 골격 중합체의 전환율을 다소 저하시키는 상태에서 MMA 전환율 및 % 그라프트 값을 보다 크게 향상시켰으며, 그 효과는 PMMA에 침전제인 메탄올에서 보다 현저하였다. 용매 첨가에서 교반속도의 변화에 용매 무첨가시의 MMA 전환율값은 2배 이상, % 그라프트값은 거의 3배로, SA 전환율과 그라프트 효율값은 95% 이상 향상시킬 수 있었다.