• Bulletin of the Korean Chemical Society
• /
• 제6권1호
• /
• pp.37-40
• /
• 1985

The electrical conductance and UV absorbance of 4,N-dimethyl Pridinium Iodide (NDMPI) were measured in the ethanol volume percentage, 95, 90, 80 and 60 of an ethanol-water mixture at 15, 25, 35 and $45^{\circ}C$. Ionic association constants(K) of NDMPI were evaluated in accordance with a combined method of conductance UV absorbance. The ion size parameter (${\gamma}_{\pm}$) and dipole momemt (${\mu}_{A+D-}$) of NDMPI were obtained from the values of K and dielectric constant. The ${\mu}_{A+D-}$- values were in good agreement with the values of transition moment(${\mu}_{mn}$) which is calculated form the UV peak values. The large negative values of the electrical enthalpy (${\Delta}H_{el}^{\circ}$) and entropy (${\Delta}H_{el}^{\circ}$ ) have proved that NDMPI had a positive hydration. The positive values of entropy (${\Delta}S^{\circ}$) means the formation of NDMPI ion goes with dehydration.

• 한국태양에너지학회 논문집
• /
• 제32권6호
• /
• pp.85-92
• /
• 2012

A nanofluid is a fluid containing suspended solid particles, with sizes on the order of nanometers. Normally, nanofluids have higher thermal conductivitiest han their base fluids. Therefore, we measured the thermal conductivity and viscosity of oxidized carbon nanofluids based the mixture of distilled water and ethanol (ethanol concentration is 0.2) oxidized carbon nanofluids were made by ultrasonic dispersing oxidized multi-walled carbon nanotubes in the mixture of distilled water and ethanol at the rates of 0.001~ 0.1 vol%. The thermal conductivity and viscosity of oxidized carbon nanofluids were measured by using transient hot-wire method and rotational digital viscometer, respectively. And all of experiments were carried out at the same temperature conditions($10^{\circ}C$, $25^{\circ}C$ and $70^{\circ}C$). As a result, when volume fraction of nanofluids is 0.1 vol%, thermal conductivity was improved 13.6% ($10^{\circ}C$), 15.1% ($25^{\circ}C$), and 17.0% ($70^{\circ}C$), and its viscosity was increased by 36.0% ($10^{\circ}C$), 32.9% ($25^{\circ}C$) and 19.5% ($70^{\circ}C$) than the base fluids.

• Korean Chemical Engineering Research
• /
• 제56권1호
• /
• pp.29-41
• /
• 2018

공비점이 존재하거나 상대휘발도 차이가 적은 2성분 혼합물은 단일 증류탑으로 분리하기 어렵다. 이때 혼합물에서 분리가 어려운 영역을 투과증발막을 사용하여 분리하면 효율적인 공정을 설계할 수 있다. 본 연구에서는 물-유기용매 혼합물을 분리하기 위한 증류-투과증발막 혼성공정을 제시하고, 물-초산 혼합물과 물-에탄올 혼합물의 분리공정을 각각 모사하였다. 증류탑 상부 흐름이 친수성 막을 통과하여 물을 높은 순도로 분리하는 공정을 모사하였다. 실험과 문헌에서 얻은 친수성 막의 투과도를 토대로 막 모델을 만들어 막 면적을 계산하였다. 제시한 공정의 최적화를 위해, 목적함수를 연간 총 비용으로 정하고 주요 설계 변수들을 최적화 변수로 하여 최적화 문제를 구성하였다. 또한, 혼성공정의 각 최적화 변수의 변화에 따른 목적함수 값의 변화 추세를 나타내고 최적화 변수를 최적점에 가까운 값으로 쉽게 추측할 수 있는 방법을 제안하였다.

• 한국화재소방학회논문지
• /
• 제29권2호
• /
• pp.39-43
• /
• 2015

인화점은 액체 혼합물의 화재와 폭발의 위험성을 특징짓는 주된 성질이다. 인화점은 가연성 액체에 불꽃이 가해졌을 때 점화가 발생하는 가장 낮은 온도로 정의된다. Seta flash 밀폐식 장치를 이용하여 이성분계 수용성 혼합물인 water-methanol계와 water-ethanol계의 인화점을 측정하였다. Wilson 식과 UNIQUAC 식과 같은 활동도 모델식을 활용한 방법을 이용하여 인화점을 계산하였다. 이 계산치와 라울의 법칙에 의한 계산치를 비교하였다. 그 결과, 활동도 계수 모델식에 의한 계산치가 라울의 법칙에 의한 계산치 보다 측정값에 보다 근접하였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 춘계학술대회논문집
• /
• pp.380-390
• /
• 2007

The purpose of this study is to make a functional Hanji treated with an oriental lacquer which has various functionalities. The raw oriental lacquer produced in China was used in this study This lacquer was diluted with ethanol and terpene in different solvent ratios. The diluted lacquer in the solvents had two layers. The upper layer was solvent soluble and the lower contained precipitates. Hanji was treated with the solvent solubles and the mixture containing precipitates, and then properties of the Hanji were evaluated. The oriental lacquer consisted of 25.04% of water, 60% of urushiol, 3.13% of nitrogen-containing compounds, and 5.66% of gum. The pH of oriental lacquer was 5.3 and the viscosity was 1680 cP. The average weight, thickness, and density of Hanji treated with oriental lacquer tended to gradually decreased as the lower concentration of lacquer was used and as the solvent soluble was treated. Tensile strength of the treated Hanji decreased when the diluted lacquer was used and Hanji treated with terpene dilutes at the ratio of lacquer to solvent of 1:5 (v/v) showed higher tensile strength than ones treated with ethanol dilutes. The folding endurance decreased as the less concentrated lacquer was used and the highest value was obtained when 1:40 (v/v) of lacquer to solvent ratio in both ethanol and terpene mixture. Absorption ratio was higher in the Hanji treated with ethanol mixture, treated with the lacquer in higher concentration, and treated with ethanol mixture. Hanji treated with ethanol dilutes at 1:20 (v/v) and the lower ratio of lacquer to solvent showed a hydrophobic property. Amount of the bound dye materials tended to be decreasing as the concentration of lacquer becomes lower and it was higher in Hanji treated with ethanol mixture than with terpene mixture. Color of Hanji treated with the solvent diluted mixture was Y to YR-type, whereas that of Hanji treated with raw oriental lacquer was Y-type, terpene

• Bulletin of the Korean Chemical Society
• /
• 제5권1호
• /
• pp.44-49
• /
• 1984

The ionic association constant (K) of N-methyl pyridinium iodide (NMPI) ion in several ethanol-water mixtures were determined by the combination of UV spectroscopy and conductance measurements using the Shedlovsky function as a correction factor. The measurement of electrical conductance and UV absorption were performed in 95, 90, 80 and 60 volume percentages of ethanol in the solvent mixture at 15, 25, 35 and 45 $({\pm}0.1)^{\circ}C$. The ion size parameter $(r_A+_D-)$ and the dipole moment $({\mu}_A+_D-)$ of NMPI ion were obtained from he linear plots of ln K vs. (1/D) and (D-1)/(2D+1), respectively. These ${\mu}_A+_D-$ values were in good agreement with the values of transition moment calculated from the equation, ${\mu}_{nm}=6.5168{\times}10^{-2}{\times}({\varepsilon}_{max}{\frac{\bar{\nu}_{\frac{1}{2}}}{\bar{\nu}_{max}})^{\frac{1}{2}}$ (Debye) which we have derived. The thermodynamic parameters indicate (1) that the water dipoles have an ordered rearrangement around the dipolar NMPI ions rather than the configuration existing in bulk free waters; and (2) that the equilibrium state between NMPI ion and its component ions are controlled by entropy.

• 한국염색가공학회지
• /
• 제31권3호
• /
• pp.127-134
• /
• 2019

Cotton fabrics were treated with gelatin to improved their dyeability, color strength toward cochineal dye. Gelatin were used as the protein. Gelatin is containing a large number of hydrophilic groups. Pad-dry-cure method was used for the treatment process(10g/L concentration). The scanning electron micrograph showed the gelatin was deposited on the surface of cotton. Pretreated fabrics were mordanted with 10%(owf) alum. Then the fabrics were dyed with cochineal. Compared with original cotton fabric the K/S value with cochineal dyes was significantly improved on gelatin modified cotton. Treating cotton with 10g/L concentration gelatin offered higher cochineal adsorption. The dyeability of pH 4 yielded the highest color strength. In dyebaths of a ratio of ethanol and water such as; 10:0, 9:1, 8:2, 7:3, 6:4, 5:5, 4:6, 3:7, 2:8, 1:9, 0:10, fabrics were dyed. The ratio of ethanol and water had powerful effects on solution polarity. Cochineal dye uptake showed maximum value, when the proportion of ethanol and water was 9:1. Dyeing at increased temperatures and with increased time resulted in higher dye uptake and reddish-purple color(5RP). The washing fastness was 1-2grade, and the fastness to light was 2-3grade.

• Fibers and Polymers
• /
• 제1권2호
• /
• pp.92-96
• /
• 2000

A high molecular weight polyhydroxyamide (PHA) solution in N, N-dimethyl acetamide (DMAc) was prepared from 3, 3'-dihydroxybenzidine and isophthalic chloride (IPC), which was used for spinning PHA fiber. Before spinning, the diffusion property of DMAc into various coagulants was examined. The fiber was well formed in coagulants such as water/ethanol with a composition of 5/5, ethanol, and ethanol/isopropanol with a composition of 7/3 and 5/5. However, the PHA fiber spun in the water/ethanol mixture contained voids. After the fiber spun in ethanol was annealed at over $350^{\circ}C$, the ultimate stress and initial modulus of the fiber increased from 75.5 MPa and 3.22 GPa to 369 MPa and 29.5 GPa, respectively. These properties of the PHA fiber spun by the dry spinning method were also enhanced, attaining 154 MPa and 5.56 Gpa, respectivel.

• 생명과학회지
• /
• 제18권9호
• /
• pp.1305-1311
• /
• 2008

본 연구는 바나바 잎 추출 용매에 따른 항당뇨 효과에 관한 것으로 세포 독성 실험을 통하여 인체에 대한 독성이 없음을 확인하였고 $\beta$-cell 인슐린 분비 실험을 통하여 항당뇨 효과를 알아보았다. 또한 당뇨 유발쥐를 이용한 인슐린 분비 실험, 체중변화 측정, 혈중 및 혈청의 glucose 농도, 총콜레스테롤 수치, HDL-cholesterol 농도, triglyceride 농도, free fatty acid 농도, langerhans islet에서의 인슐린 분비 의 확인을 통해 혈당조절 효과를 비교하였다. 물 혹은 에탄올을 단독으로 이용하여 추출한 추출물이나 70%, 90% 에탄올로 추출한 추출물 보다 열수로 먼저 추출한 후 에탄올로 다시 추출하여 혼합안 추출물이 항당뇨 효과가 더 뛰어남을 알 수 있었다. 이는 친수성(hydrophilic) 유효성분들과 소수성(hydrophobic) 유효성분들의 추출 유무나 함량에 의한 것이다. 특히, 많은 문헌에 언급된 코로소린산이라는 단일 성분(unique)에 의한 항당뇨 효과라기보다는 친수성 및 소수성 폴리페놀 및 항산화성분과 같은 유효성분들이 조합되어(mixture) 항당뇨 효과에 영향을 미치는 것으로 사료된다.

• Korean Chemical Engineering Research
• /
• 제43권2호
• /
• pp.243-248
• /
• 2005

분리막 투과증발은 증류에 비하여 낮은 에너지를 요구하기 때문에 물/유기물 혼합물의 분리에 이용될 수 있으며 공비 혼합물이나 이성질체의 분리에 선호되는 방법이다. 제올라이트 분리막은 고분자 분리막에 비하여 열적, 기계적, 화학적 안정성이 우수하며 NaA 제올라이트 분리막은 큰 친수성을 나타내므로 물/유기물 혼합물로부터 효율적인 물 분리에 적합하다. 본 연구에서는 NaA 제올라이트 분리막을 이용한 투과증발 막분리 공정을 이용하여 물/에탄올 혼합물에서 선택적으로 물을 분리하고자 하였다. 에탄올의 공급 농도가 증가함에 따라 총투과플럭스는 감소하였으며 선택도는 증가한 후 높은 에탄올 농도에서 감소하는 것을 관찰할 수 있었다. 실험 온도의 증가에 따라 총투과플럭스는 증가하였으며 선택도 또한 증가하였지만 높은 에탄올 농도에서는 감소하였다. 160시간 이상의 장기간 실험을 통하여 총투과플럭스와 선택도가 안정적으로 일정함을 확인할 수 있었다. 또한, 본 연구를 통하여 얻어진 NaA 제올라이트 분리막은 증류 및 PVA 계열 고분자 분리막보다 우수한 성능을 나타냄을 알 수 있었다.