• 제목/요약/키워드: water use intensity

검색결과 195건 처리시간 0.029초

밭토양(土壤)에 대(對)한 가리(加里) 검정(檢定) (Soil Testing for Potassium in Upland Soils -Review on the Methodologies-)

  • 홍종운
    • 한국토양비료학회지
    • /
    • 제10권3호
    • /
    • pp.153-170
    • /
    • 1977
  • 밭 토양(土壤)에 대(對)한 가리검정(加里檢定) 방법(方法)의 발전(發展) 방향(方向)을 염두(念頭)에 두고 이제까지 알려진 토양(土壤)의 가리(加里) 공급능(供給能) 평가(評價) 방법(方法) 및 토양유효가리(土壤有效加里) 검정(檢定) 방법(方法)들의 원리(原理)와 실제(實際) 활용성(活用性)들을 고찰(考察)했으며, 우리나라 밭 토양(土樓)의 가리(加里) 공급능(供給能)과 관련(關聯)된 화학적(化學的) 성질(性質) 및 밭 작물(作物)들의 가리(加里) 요구(要求) 특성(特性) 등(等)을 검토(檢討)했다. 다음은 본고찰(本考察)의 요지(要旨)이다. 1. 이제까지 상당(相當)히 많은 방법(方法)들이 토양(土壤)의 가리공급능(加里供給能) 평가(評價)와 유효가리(有效加里) 검정방법(檢定方法)으로 제안(提案)돼 왔다. 이들은 성질상(性質上) 두 가지로 크게 나뉘는데, 하나는 용량인자(容量因子)를 측정(測定)하는 방법(方法)과 다른 하나는 강도인자(强度因子)를 측정(測定)하는 방법(方法)이 그것이다. 용량인자(容量因子)의 경우(境遇)에는 대개(大槪) 치환성(置換性) 가리(加里)와 비치환성(非置換性) 가리(加里) 일부(一部)를 측정(測定)하고, 강도인자(强度因子)의 경우(境遇)에는 주요(主要) 양(陽)이온의 활동도비(活動度比) 및 가리(加里) 치환(置換) Enegy에 대(對)해 관심(關心)을 둔다. 2. 관심(關心)의 대상(對象)이 되는 부분(部分)의 가리(加里)의 침출(浸出) 방법(方法)으로는 화학적(化學的)로는 침출법(浸出法), 전기접근법(電氣送析法) 및 이온 교환법(交換法) 등(等)이 알려져 있다. 그러나 방법(方法)의 간이성(簡易性) 때문에 화학적(化學的) 침출법(浸出法)이 널리 쓰이고 있다. 새로이 제안(提案)된 전기고도여과법(Electro-Ultra-Filtration)도 방법(方法)의 간이성(簡易性)과 이론적(理論的) 타당성(妥當性)을 고려(考慮)할 때 고찰(考察) 활용(活用)을 위(爲)해 연구(硏究)할 필요(必要)가 있다. 3. 강도인자(强度因子)를 고려(考慮)한 방법(方法)들은 이론적(理論的) 타당성(妥當性)은 높으나 수행상(逢行上)의 복잡성(複雜性)때문에 다량(多量)의 업무(業務)를 효(要)하는 토양검정(土壤檢定)에 활용(活用)키는 힘들다. 4. 치환성(置換性) 가리(加里)는 수용성(水溶性) 가리(加里)의 제1차(第一次) 급원(給源)이며 장기간(長期間)에 걸쳐 작물(作物)에게 유효(有效)한 것으로 알려진 비치환성(非置換性) 가리함량(加里含量)에 대(對)한 지표(指標)도 되며 측정법(測定法)의 간이성(簡易性)이 높은 점(點)으로 보아 토양검정(土壤檢定)에서 채택(採擇)하기 알맞은 검정(檢定) 대상(對象)이다. 5. 작물(作物)에 의(依)한 가리흡수(加里吸收)의 난이도(難易度)는 유효가리(有效加里)의 함량(含量)에만 의(依)해 결정(決定)되지 않으므로 이 측정치(測定値)를 작물(作物)에 대(對)한 가리비료(加里肥料) 시용양(施用量) 추천(推薦)을 위(爲)해 활용(活用)코저 할 때는 총(總) CEC에 대(對)한 치환성(置換性) 가리(加里) 포화도(飽和度)로 따지는 것이 무난(無難)한 것 같다. 6. 수개(數個)의 포장(團場) 시험(試驗) 성적(成績)과 pot 시험성적(試驗成績)들은 토양(土壤)의 가리(加里) 포화도(飽和度)가 비교적(比較的) 무난(無難)한 가리비료(加里肥料) 소요량(所要量) 추천(推薦)의 지표(指標)가 됨을 시사(示唆)한 바도 있다.

  • PDF

논벼 장.단간품종의 증발산제계수와 건물량과의 관계에 대한 연구(I) (Studies on Relations between Various Coeffcients of Evapo-Transpiration and Quantities of Dry Matters for Tall-and Short Statured Varieties of Paddy Rice)

  • 류한열;김철기
    • 한국농공학회지
    • /
    • 제16권2호
    • /
    • pp.3361-3394
    • /
    • 1974
  • The purpose of this thesis is to disclose some characteristics of water consumption in relation to the quantities of dry matters through the growing period for two statured varieties of paddy rice which are a tall statured variety and a short one, including the water consumption during seedling period, and to find out the various coefficients of evapotranspiration that are applicable for the water use of an expected yield of the two varieties. PAL-TAL, a tall statured variety, and TONG-lL, a short statured variety were chosen for this investigation. Experiments were performed in two consecutive periods, a seedling period and a paddy field period, In the investigation of seedling period, rectangular galvanized iron evapotranspirometers (91cm${\times}$85cm${\times}$65cm) were set up in a way of two levels (PAL-TAL and TONG-lL varieties) with two replications. A standard fertilization method was applied to all plots. In the experiment of paddy field period, evapotanspiration and evaporation were measured separately. For PAL-TAL variety, the evapotranspiration measurements of 43 plots of rectangular galvanized iron evapotranspirometer (91cm${\times}$85cm${\times}$65cm) and the evaporation measurements of 25 plots of rectangular galvanized iron evaporimeter (91cm${\times}$85cm${\times}$15cm) have been taken for seven years (1966 through 1972), and for TONG-IL variety, the evapotranspiration measurements of 19 plots and the evaporation measurements of 12 plots have been collected for two years (1971 through 1972) with five different fertilization levels. The results obtained from this investigation are summarized as follows: 1. Seedling period 1) The pan evaporation and evapotranspiration during seedling period were proved to have a highly significant correlation to solar radiation, sun shine hours and relative humidity. But they had no significant correlation to average temperature, wind velocity and atmospheric pressure, and were appeared to be negatively correlative to average temperature and wind velocity, and positively correlative to the atmospheric pressure, in a certain period. There was the highest significant correlation between the evapotranspiration and the pan evaporation, beyond all other meteorological factors considered. 2) The evapotranpiration and its coefficient for PAL-TAL variety were 194.5mm and 0.94∼1.21(1.05 in average) respectively, while those for TONG-lL variety were 182.8mm and 0.90∼1.10(0.99 in average) respectively. This indicates that the evapotranspiration for TONG-IL variety was 6.2% less than that for PAL-TAL variety during a seedling period. 3) The evapotranspiration ratio (the ratio of the evapotranspiration to the weight of dry matters) during the seedling period was 599 in average for PAL-TAL variety and 643 for TONG-IL variety. Therefore the ratio for TONG-IL was larger by 44 than that for PAL-TAL variety. 4) The K-values of Blaney and Criddle formula for PAL-TAL variety were 0.78∼1.06 (0.92 in average) and for TONG-lL variety 0.75∼0.97 (0.86 in average). 5) The evapotranspiration coefficient and the K-value of B1aney and Criddle formular for both PAL-TAL and TONG-lL varieties showed a tendency to be increasing, but the evapotranspiration ratio decreasing, with the increase in the weight of dry matters. 2. Paddy field period 1) Correlation between the pan evaporation and the meteorological factors and that between the evapotranspiration and the meteorological factors during paddy field period were almost same as that in case of the seedling period (Ref. to table IV-4 and table IV-5). 2) The plant height, in the same level of the weight of dry matters, for PAL-TAL variety was much larger than that for TONG-IL variety, and also the number of tillers per hill for PAL-TAL variety showed a trend to be larger than that for TONG-IL variety from about 40 days after transplanting. 3) Although there was a tendency that peak of leaf-area-index for TONG-IL variety was a little retarded than that for PAL-TAL variety, it appeared about 60∼80 days after transplanting. The peaks of the evapotranspiration coefficient and the weight of dry matters at each growth stage were overlapped at about the same time and especially in the later stage of growth, the leaf-area-index, the evapotranspiration coefficient and the weight of dry matters for TONG-IL variety showed a tendency to be larger then those for PAL-TAL variety. 4) The evaporation coefficient at each growth stage for TONG-IL and PAL-TALvarieties was decreased and increased with the increase and decrease in the leaf-area-index, and the evaporation coefficient of TONG-IL variety had a little larger value than that of PAL-TAL variety. 5) Meteorological factors (especially pan evaporation) had a considerable influence to the evapotranspiration, the evaporation and the transpiration. Under the same meteorological conditions, the evapotranspiration (ET) showed a increasing logarithmic function of the weight of dry matters (x), while the evaporation (EV) a decreasing logarithmic function of the weight of dry matters; 800kg/10a x 2000kg/10a, ET=al+bl logl0x (bl>0) EV=a2+b2 log10x (a2>0 b2<0) At the base of the weight of total dry matters, the evapotranspiration and the evaporation for TONG-IL variety were larger as much as 0.3∼2.5% and 7.5∼8.3% respectively than those of PAL-TAL variety, while the transpiration for PAL-TAL variety was larger as much as 1.9∼2.4% than that for TONG-IL variety on the contrary. At the base of the weight of rough rices the evapotranspiration and the transpiration for TONG-IL variety were less as much as 3.5% and 8.l∼16.9% respectively than those for PAL-TAL variety and the evaporation for TONG-IL was much larger by 11.6∼14.8% than that for PAL-TAL variety. 6) The evapotranspiration coefficient, the evaporation coefficient and the transpiration coefficient and the transpiration coefficient were affected by the weight of dry matters much more than by the meteorological conditions. The evapotranspiratioa coefficient (ETC) and the evaporation coefficient (EVC) can be related to the weight of dry matters (x) by the following equations: 800kg/10a x 2000kg/10a, ETC=a3+b3 logl0x (b3>0) EVC=a4+b4 log10x (a4>0, b4>0) At the base of the weights of dry matters, 800kg/10a∼2000kg/10a, the evapotranspiration coefficients for TONG-IL variety were 0.968∼1.474 and those for PAL-TAL variety, 0.939∼1.470, the evaporation coefficients for TONG-IL variety were 0.504∼0.331 and those for PAL-TAL variety, 0.469∼0.308, and the transpiration coefficients for TONG-IL variety were 0.464∼1.143 and those for PAL-TAL variety, 0.470∼1.162. 7) The evapotranspiration ratio, the evaporation ratio (the ratio of the evaporation to the weight of dry matters) and the transpiration ratio were highly affected by the meteorological conditions. And under the same meteorological condition, both the evapotranspiration ratio (ETR) and the evaporation ratio (EVR) showed to be a decreasing logarithmic function of the weight of dry matters (x) as follows: 800kg/10a x 2000kg/10a, ETR=a5+b5 logl0x (a5>0, b5<0) EVR=a6+b6 log10x (a6>0 b6<0) In comparison between TONG-IL and PAL-TAL varieties, at the base of the pan evaporation of 343mm and the weight of dry matters of 800∼2000kg/10a, the evapotranspiration ratios for TONG-IL variety were 413∼247, while those for PAL-TAL variety, 404∼250, the evaporation ratios for TONG-IL variety were 197∼38 while those for PAL-TAL variety, 182∼34, and the transpiration ratios for TONG-IL variety were 216∼209 while those for PAL-TAL variety, 222∼216 (Ref. to table IV-23, table IV-25 and table IV-26) 8) The accumulative values of evapotranspiration intensity and transpiration intensity for both PAL-TAL and TONG-IL varieties were almost constant in every climatic year without the affection of the weight of dry matters. Furthermore the evapotranspiration intensity appeared to have more stable at each growth stage. The peaks of the evapotranspiration intensity and transpiration intensity, for both TONG-IL and PAL-TAL varieties, appeared about 60∼70 days after transplanting, and the peak value of the former was 128.8${\pm}$0.7, for TONG-IL variety while that for PAL-TAL variety, 122.8${\pm}$0.3, and the peak value of the latter was 152.2${\pm}$1.0 for TONG-IL variety while that for PAL-TAL variety, 152.7${\pm}$1.9 (Ref.to table IV-27 and table IV-28) 9) The K-value in Blaney & Criddle formula was changed considerably by the meteorological condition (pan evaporation) and related to be a increasing logarithmic function of the weight of dry matters (x) for both PAL-TAL and TONG-L varieties as follows; 800kg/10a x 2000kg/10a, K=a7+b7 logl0x (b7>0) The K-value for TONG-IL variety was a little larger than that for PAL-TAL variety. 10) The peak values of the evapotranspiration coefficient and k-value at each growth stage for both TONG-IL and PAL-TAL varieties showed up about 60∼70 days after transplanting. The peak values of the former at the base of the weights of total dry matters, 800∼2000kg/10a, were 1.14∼1.82 for TONG-IL variety and 1.12∼1.80, for PAL-TAL variety, and at the base of the weights of rough rices, 400∼1000 kg/10a, were 1.11∼1.79 for TONG-IL variety and 1.17∼1.85 for PAL-TAL variety. The peak values of the latter, at the base of the weights of total dry matters, 800∼2000kg/10a, were 0.83∼1.39 for TONG-IL variety and 0.86∼1.36 for PAL-TAL variety and at the base of the weights of rough rices, 400∼1000kg/10a, 0.85∼1.38 for TONG-IL variety and 0.87∼1.40 for PAL-TAL variety (Ref. to table IV-18 and table IV-32) 11) The reasonable and practicable methods that are applicable for calculating the evapotranspiration of paddy rice in our country are to be followed the following priority a) Using the evapotranspiration coefficients based on an expected yield (Ref. to table IV-13 and table IV-18 or Fig. IV-13). b) Making use of the combination method of seasonal evapotranspiration coefficient and evapotranspiration intensity (Ref. to table IV-13 and table IV-27) c) Adopting the combination method of evapotranspiration ratio and evapotranspiration intensity, under the conditions of paddy field having a higher level of expected yield (Ref. to table IV-23 and table IV-27). d) Applying the k-values calculated by Blaney-Criddle formula. only within the limits of the drought year having the pan evaporation of about 450mm during paddy field period as the design year (Ref. to table IV-32 or Fig. IV-22).

  • PDF

심층신경망을 이용한 레이더 영상 학습 기반 초단시간 강우예측 (Very short-term rainfall prediction based on radar image learning using deep neural network)

  • 윤성심;박희성;신홍준
    • 한국수자원학회논문집
    • /
    • 제53권12호
    • /
    • pp.1159-1172
    • /
    • 2020
  • 본 연구에서는 강우예측을 위해 U-Net과 SegNet에 기반한 합성곱 신경망 네트워크 구조에 장기간의 국내 기상레이더 자료를 활용하여 심층학습기반의 강우예측을 수행하였다. 또한, 기존 외삽기반의 강우예측 기법인 이류모델의 결과와 비교 평가하였다. 심층신경망의 학습 및 검정을 위해 2010부터 2016년 동안의 기상청 관악산과 광덕산 레이더의 원자료를 수집, 1 km 공간해상도를 갖는 480 × 480의 픽셀의 회색조 영상으로 변환하여 HDF5 형태의 데이터를 구축하였다. 구축된 데이터로 30분 전부터 현재까지 10분 간격의 연속된 레이더 영상 4개를 이용하여 10분 후의 강수량을 예측하도록 심층신경망 모델을 학습하였으며, 학습된 심층신경망 모델로 60분의 선행예측을 수행하기 위해 예측값을 반복 사용하는 재귀적 방식을 적용하였다. 심층신경망 예측모델의 성능 평가를 위해 2017년에 발생한 24개의 호우사례에 대해 선행 60분까지 강우예측을 수행하였다. 임계강우강도 0.1, 1, 5 mm/hr에서 평균절대오차와 임계성공지수를 산정하여 예측성능을 평가한 결과, 강우강도 임계 값 0.1, 1 mm/hr의 경우 MAE는 60분 선행예측까지, CSI는 선행예측 50분까지 참조 예측모델인 이류모델이 보다 우수한 성능을 보였다. 특히, 5 mm/hr 이하의 약한 강우에 대해서는 심층신경망 예측모델이 이류모델보다 대체적으로 좋은 성능을 보였지만, 5 mm/hr의 임계 값에 대한 평가결과 심층신경망 예측모델은 고강도의 뚜렷한 강수 특징을 예측하는 데 한계가 있었다. 심층신경망 예측모델은 예측시간이 길어질수록 공간 평활화되는 경향이 뚜렷해지며, 이로 인해 강우 예측의 정확도가 저하되었다. 이류모델은 뚜렷한 강수 특성을 보존하기 때문에 강한 강도 (>5 mm/hr)에 대해 심층신경망 예측모델을 능가하지만, 강우 위치가 잘못 이동하는 경향이 있다. 본 연구결과는 이후 심층신경망을 이용한 레이더 강우 예측기술의 개발과 개선에 도움이 될 수 있을 것으로 판단된다. 또한, 본 연구에서 구축한 대용량 기상레이더 자료는 향후 후속연구에 활용될 수 있도록 개방형 저장소를 통해 제공될 예정이다.

선박용 알루미늄 합금재의 부식피로균열 진전특성과 그 억제에 관한 연구 (Corrosion Fatigue Cracking Propagation Characteristics and its Protection for the AL-Alloys of Shipbuilding)

  • 임우조;김수병;이진열
    • 수산해양기술연구
    • /
    • 제25권2호
    • /
    • pp.87-104
    • /
    • 1989
  • Recently, with the tendency of more lightening, high-strength and high-speed in the marine industries such as marine structures, ships and chemical plants, the use of the aluminium Alloy is rapidly enlarge and there occurs much interest in the study of corrosion fatigue crack characteristics. In this paper, the initiation of surface crack and the propagation characteristics on the base metal and weld zone of 5086-H116 Aluminium Alloy Plate which is one of the Al-Mg serious alloy(A5000serious) used most when building the special vessels, were investigated by the plane bending corrosion fatigue under the environments of marine, air and applying cathodic protection. The effects of various specific resistances on the initiation, propagation behavior of corrosion fatigue crack and corrosion fatigue life in the base metal and heat affected zone were examined and its corrosion sensitivity was quantitatively obtained. The effects of corrosion on the crack depth in relation to the uniform surface crack length were also investigated. Also, the structural, mechanical and electro-chemical characteristics of the metal at the weld zone were inspected to verify the reasons of crack propagation behavior in the corrosion fatigue fracture. In addition, the effect of cathodic protection in the fracture surface of weld zone was examined fractographically by Scanning Electron Microscope(S.E.M.). The main results obtained are as follows; (1) The initial corrosion fatigue crack sensitibity under specific resistance of 25Ω.cm% show 2.22 in the base metal and 19.6 in the HEZ, and the sensitivity decreases as specific resistance increases (2) By removing reinforcement of weldment, the initiation and propagation of corrosion crack in the HAZ are delayed, and corrosion fatigue life increases. (3) As specific resistance decreases, the sensitivity difference of corrosion fatigue life in the base metal and HAZ is more susceptible than that of intial corrosion fatigue crack. (4) Experimental constant, m(Paris' rule) in the marine environment is in the range of about 3.69 to 4.26, and as specific resistance increases, thje magnitude of experimental constant, also increases and the effect by corrosion decreases. (5) Comparing surface crack length with crack depth, the crack depth toward the thickness of specimen in air is more deeply propagated than that in corrosion environment. (6) The propagation particulars of corrosion fatigue crack for HAZ under initial stress intensity factor range of $\Delta$k sub(li) =27.2kgf.mm super(-3/2) and stress ratio of R=0 shows the retardative phenomenon of crack propagation by the plastic deformation at crack tip. (7) Number of stress cycles to corrosion fatigue crack initiation of the base metal and the welding heat affected zone are delayed by the cathodic protection under the natural sea water. The cathodic protection effect for corrosion fatigue crack initiation is eminent when the protection potential is -1100 mV(SCE). (8) When the protection potential E=-1100 mV(SCE), the corrosion fatigue crack propagation of welding heat affected zone is more rapid than that of the case without protection, because of the microfissure caused by welding heat cycle.

  • PDF

CMC 고정화 Photobacterium phosphoreum 의 생체발광량을 이용한 독성농도(EC50)의 QSAR 모델 (QSAR Modeling of Toxicant Concentrations(EC50) on the Use of Bioluminescence Intensity of CMC Immobilized Photobacterium Phosphoreum)

  • 이용제;허문석;이우창;전억한
    • KSBB Journal
    • /
    • 제15권3호
    • /
    • pp.299-306
    • /
    • 2000
  • 발광미생물 (luminescent bacteria)인 P. phosphoreum을 이용한 수계의 환경독성물질로 지정된 ethane, benzene, phenol류에 chlorine이 치환된 l47~의 독성강도를 생체발광의 50%저하시키 는 독성농도인 ECso값을 통한 생물학적 정량을 하였을 때 phenol) benzene) ethane 의 순서로 독성깅도가 높게 산출되 어졌으며, 특히 지환된 chlo괴ne의 수가 증가할수록 독성강도가 강하다는 것을 알 수 있었다. 또한 산출된 ECso값을 이용허여 독성물질들의 물려화학적 parameter특성인 octan이(water 분할계 수 (log P), 용해도 (log S) 및 solvatochromic parameter의 떤관쟁 을 QSAR 모탤링하였으며 실힘을 통하지 않고, 독성의 독성강도 를 예측할 수 있는 회기식을 다음과 같이 산출하였다. $log EC_{50} =2.48 + 0.914 log S(n=9 R2=85.5% RE=0.378) log EC_{50}=0.35 - 4.48 Vi/100 + 2.84 \pi^* +9.46{\beta}m-4.48am (n =14 R2=98.2% RE=0.012) log EC_{50} =2.64 -1.66 log P(n=5, R2=98.8% RE=0.16) log EC_{50}=3.44 -1.09 log P(n=9 R2= 80.8% Re=0.207)$. QSAR 모델은 QSAR 검증식을 통하여 확인된 다중회기식을 이용함으로 실험하지 않은 독성물 질이 갖는 물리화학적인 특성을 대입하여 log Eeso값을 예측할 수 있으므로 경제적, 시간적으로 이익을 얻을 수 있는 모델이다.

  • PDF

휘발성 질소화합물 감응형 색변환 센서를 활용한 연어 신선도 모니터링 (Freshness Monitoring of Raw Salmon Filet Using a Colorimetric Sensor that is Sensitive to Volatile Nitrogen Compounds)

  • 김재만;이현지;현정호;박준식;김용신
    • 센서학회지
    • /
    • 제29권2호
    • /
    • pp.93-99
    • /
    • 2020
  • A colorimetric paper sensor was used to detect volatile nitrogen-containing compounds emitted from spoiled salmon filets to determine their freshness. The sensing mechanism was based on acid-base reactions between acidic pH-indicating dyes and basic volatile ammonia and amines. A sensing layer was simply fabricated by drop-casting a dye solution of bromocresol green (BCG) on a polyvinylidene fluoride substrate, and its color-change response was enhanced by optimizing the amounts of additive chemicals, such as polyethylene glycol, p-toluene sulfonic acid, and graphene oxide in the dye solution. To avoid the adverse effects of water vapor, both faces of the sensing layer were enclosed by using a polyethylene terephthalate film and a gas-permeable microporous polytetrafluoroethylene sheet, respectively. When exposed to basic gas analytes, the paper-like sensor distinctly exhibited a color change from initially yellow, then to green, and finally to blue due to the deprotonation of BCG via the Brønsted acid-base reaction. The use of ammonia analyte as a test gas confirmed that the sensing performance of the optimized sensor was reversible and excellent (detection time of < 15 min, sensitive naked-eye detection at 0.25 ppm, good selectivity to common volatile organic gases, and good stability against thermal stress). Finally, the coloration intensity of the sensor was quantified as a function of the storage time of the salmon filet at 28℃ to evaluate its usefulness in monitoring of the food freshness with the measurement of the total viable count (TVC) of microorganisms in the food. The TVC value increased from 3.2 × 105 to 3.1 × 109 cfu/g in 28 h and then became stable, whereas the sensor response abruptly changed in the first 8 h and slightly increased thereafter. This result suggests that the colorimetric response could be used as an indicator for evaluating the degree of decay of salmon induced by microorganisms.

RF Power에 따른 태양전지용 N-type ZnS 특성연구 (A Study on Properties of N-type ZnS Deposited at Various RF Power for Solar Cell Applications)

  • 양현훈;김한울;정운조;이석호;소순열;박계춘;이진;정해덕
    • 한국전기전자재료학회논문지
    • /
    • 제24권7호
    • /
    • pp.574-577
    • /
    • 2011
  • In this study, we use the $2.5cm{\times}7.5cm$ soda lime glass as the substrate. We used the ultrasonicator. Glass was dipped in the acetone, methanol and DI water respectively for 10 minutes. Ar(99.99%)gas was used as the sputtering gas. We varied the RF power between 100~175 W with 25 W steps. Base pressure was kept by turbo molecular pump at $3.0{\times}10^{-6}$ torr. Working pressure was kept by injection of Ar gas. ZnS thin films were deposited with the radio frequency magnetron sputtering technique at various temperatures and sputtering powers. It is also clearly observed that, the intensity of the (111) XRD peak increases with increasing the RF power. Electrical properties were measured by hall effect methods at room temperature. The resistivity, carrier concentration, and hall mobility of ZnS deposited on glass substrate as a function of sputtering power. It can be seen that as the sputtering power increase from 100 to 175 W, the resistivity of the films on glass decreased significantly from $8.1{\times}10^{-2}$ to $1.2{\times}10^{-3}\;{\Omega}{\cdot}cm$. This behavior could be explained by the effect of the sputtering power on the mobility and carrier concentration. When the RF power increases, the carrier concentration increases slightly while the resistivity decreases significantly. These variation originate from improved crystallinity and enhanced substitutional doping as the sputtering power increases.

마이크로웨이브가 부가된 광촉매에 의한 메틸렌블루의 분해 (Microwave-assisted Photocatalytic Degradation of Methylene Blue)

  • 김유봉;조아라;라덕관;박재현;김선재;정상철
    • 대한환경공학회지
    • /
    • 제30권8호
    • /
    • pp.817-822
    • /
    • 2008
  • Microwave와 자외선을 동시에 조사하여 광촉매분말이 분산된 메틸렌블루수용액의 분해실험을 하였다. 광촉매반응에 microwave와 자외선을 같이 사용하기 위하여 microwave에 의해 방전되는 무전극자외선램프를 제작하였다. 실험결과 microwave의 강도, 반응수용액의 순환유속, TiO$_2$ 분말의 첨가량 그리고 산화보조제의 첨가량이 증가할수록 광촉매분해속도가 증가하였다. 특히 과산화수소를 첨가한 광촉매반응에 microwave를 부가한 실험의 반응속도상수는 0.0250 min$^{-1}$이고 광촉매반응에 과산화수소만을 첨가한 경우의 속도상수는 0.0075 min$^{-1}$로 약 3배 정도 높은 값을 나타내었다. 본 연구의 결과로부터 광촉매반응에 microwave가 미치는 영향을 정량적으로 평가하기는 어렵지만, 과산화수소가 첨가되는 광촉매반응에 microwave의 조사가 매우 중요한 인자인 것을 알 수 있었다.

어류의 주광성에 관한 연구 7. 색광에 대한 농성어의 반응 (Phototaxis of Fish 7. Response of Sea-Bass to the Colored Lights)

  • 양용림
    • 수산해양기술연구
    • /
    • 제23권4호
    • /
    • pp.151-156
    • /
    • 1987
  • 색광에 대한 능성어 Epinephelus septemfasciatus의 행동을 조사하기 위하여, 2가지씩의 서로 다른 색광을 조사하기 위하여, 2가지씩의 서로 다른 색광을 조합하여 수조의 양단에서 동시에 광자극을 가했을 때의 반응을 주간과 야간으로 구분 조사한 결과는 다음과 같다. 1. 수조내에서의 능성어의 구간별 분포곡선은 양단구간보다 중앙구간에 많이 모여 대체로 ∩자형이 되었으며, 주야간의 차이가 비교적 뚜렷하였다. 2. 양색광쪽에서의 평균분포차는 8.07%(1.05~22.45%)였고, 주간(3.58%)보다 야간(12.55%)에 더 많았다. 3. 능성어가 잘 모이는 색광은 주간에는 청색, 적색, 백색, 황색의 순이며, 야간에는 적색, 청색, 황색, 백색의 순으로 나타났다. 4. 조명시간의 경과에 따른 집어율의 변화는 일정한 증감추세를 보이지 않고 계속 불안전하게 변동했다. 5. 두가지 색광에 대한 집어율의 차는 비교적 뚜렷하지 않았으나, 주간보다 야간에 그 차가 심했다.

  • PDF

Efficient Verification of X-ray Target Replacement for the C-series High Energy Linear Accelerator

  • Cho, Jin Dong;Chun, Minsoo;Son, Jaeman;An, Hyun Joon;Yoon, Jeongmin;Choi, Chang Heon;Kim, Jung-in;Park, Jong Min;Kim, Jin Sung
    • 한국의학물리학회지:의학물리
    • /
    • 제29권3호
    • /
    • pp.92-100
    • /
    • 2018
  • The manufacturer of a linear accelerator (LINAC) has reported that the target melting phenomenon could be caused by a non-recommended output setting and the excessive use of monitor unit (MU) with intensity-modulated radiation therapy (IMRT). Due to these reasons, we observed an unexpected beam interruption during the treatment of a patient in our institution. The target status was inspected and a replacement of the target was determined. After the target replacement, the beam profile was adjusted to the machine commissioning beam data, and the absolute doses-to-water for 6 MV and 10 MV photon beams were calibrated according to American Association of Physicists in Medicine (AAPM) Task Group (TG)-51 protocol. To verify the beam data after target replacement, the beam flatness, symmetry, output factor, and percent depth dose (PDD) were measured and compared with the commissioning data. The difference between the referenced and measured data for flatness and symmetry exhibited a coincidence within 0.3% for both 6 MV and 10 MV, and the difference of the PDD at 10 cm depth ($PDD_{10}$) was also within 0.3% for both photon energies. Also, patient-specific quality assurances (QAs) were performed with gamma analysis using a 2-D diode and ion chamber array detector for eight patients. The average gamma passing rates for all patients for the relative dose distribution was $99.1%{\pm}1.0%$, and those for absolute dose distribution was $97.2%{\pm}2.7%$, which means the gamma analysis results were all clinically acceptable. In this study, we recommend that the beam characteristics, such as beam profile, depth dose, and output factors, should be examined. Further, patient-specific QAs should be performed to verify the changes in the overall beam delivery system when a target replacement is inevitable; although it is more important to check the beam output in a daily routine.