• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.118-128
• /
• 1996

N-methyl, N-butyl and N,N-dibutyl chitosan derivatives were prepared by Schiff's base formation and hydrogenation in aqueous media. Furthermore quaternization of the chitosan derivatives was performed in N-methyl-2-pyrrolidone using methyl iodide to obtain water soluble cationic polyelectrolytes. It was confirmed that O-alkylation was occured as well as selective N-alkylation in these reactions. Chitosan and chitosan derivatives with quaternary ammonium iodide showed high flocculation power as the cationic flocculant. When tested on paper mill waste water, they showed high flocculation power, independing of pH range. The flocculation power was increased as the N-alkyl chain length was increased. Among them, N-butyl dimethyl chitosan ammonium iodide showed better flocculation power than chitosan. But, N,N-dibutyl-N-methyl chitosan ammonium iodide showed less flocculation powre than chitosan itself.

• Advances in Traditional Medicine
• /
• v.1 no.1
• /
• pp.71-81
• /
• 2000

High molecular weight water-insoluble chitosan alone has been previously shown to exhibit in vitro stimulatory effect on macrophages nitric oxide (NO) production. However, high molecular weight water-soluble chitosan (WSC) had no effect on NO production by itself. When WSC was used in combination with recombinant $interferon-{\gamma}\;(Rifn-{\gamma})$, there was a marked cooperative induction of NO synthesis in a dose-dependent manner. The optimal effect of WSC on NO synthesis was shown at 24 h after treatment with $rIFN-{\gamma}$. The increased production of NO from $rIFN-{\gamma}$ plus WSC-stimulated RAW 264.7 macrophages was decreased by the treatment with $N^G$ $monomethyl-_L-arginine$. The increase in NO synthesis was reflected, as an increased amounts of inducible NO synthase (iNOS) protein. Synergy between $rIFN-{\gamma}$ and WSC was mainly dependent on WSC-induced nuclear $factor-_KB$ activation. The present results indicate that WSC may provide various activities such as anti-microbial, anti-tumoral, and anti-viral. In addition, since NO has emerged as an important intracellular and intercellular regulatory molecule having functions as diverse as vasodilation, neural communication, cell growth regulation and host defense, it is tempting to hypothesize that this WSC is involved in the local control of the various fundamental processes such as cardiagra, cardiac infarction, impotence etc.

• Korean Journal of Food Science and Technology
• /
• v.32 no.4
• /
• pp.806-813
• /
• 2000

Attempts were made to evaluate possibilities of adding water soluble chitosan to milk for improving functionality of milk, and physico-chemical and sensory properties of chitosan added milk were studied. pH and acidity of milk with ethyl alcohol washed chitosan were close to those of control. Color and consistency of chitosan added milk were better with chitosan of lower molecular weight than with high molecular weight. Chitosan of high molecular weight resulted in increased consistency and browning of milk. Milk with less than 1.0% chitosan could be sterilized at $73^{\circ}C$ for 15 sec. with minimum protein coagulation and increase of consistency. Low molecular weight chitosan$(MW\;0.2{\sim}3\;kDa)$ accelerated the growth of Bifidobacterium bifidum, showing 10 times more cell population after 32 hrs incubation. Sensory tests showed that adding chitosan to the regular city milk resulted in significant difference in color and chemical off-flavor(p<0.05). When chitosan was added to coffee milk, there was no significant difference in sensory quality from control. The storage test showed that pH, acidity, consistency and color of coffee milk with 0.5% chitosan did not change markedly during 30 days storage at 0 and $5^{\circ}C$, but changed rapidly after 16days storage at $10^{\circ}C$. Bacterial counts increased when storage temperature was high, and the growth of bacteria was delayed in coffee milk with chitosan.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.5
• /
• pp.473-477
• /
• 2001

Chitosan has been used as an effective adsorbant for the treatment of wastewater from seafood processing. We investigated the effects of deacetylation degree (DD) and molecular weight (MW) of chitosan on protein adsorption ability and also the optimum conditions of chitosan treatment for protein adsorption in 3 kinds of protein (albumin, hemoglobin and albumin-myoglobin mixture) solutions. The higher deacetylation degree and the lower molecular weight chitosan, the higher adsorption for water soluble proteins was accomplished. The optimum pHs for adsorption of albumin, hemoglobin and albumin-myoglobin mixture (4: 1, w/w) were 4.0, 7.0 and 4.0 respectively and the optimum time was $3\~4$ hrs for all proteins. Sodium chloride in the model system of protein solution was a preventing factor for protein adsorption ability of chitosan (DD=$80\%$, MW=350 kDa).

• Horticultural Science & Technology
• /
• v.30 no.2
• /
• pp.137-143
• /
• 2012

Chinese cabbage plant was grown hydroponically for 4 weeks in order to examine the temporal relationship of calcium concentration of the nutrient solution with calcium content in the leaf tissue and susceptibility of the tissue to soft rot disease by $Pectobacterium$ $carotovorum$ ssp. $carotovorum$ (Pcc). Calcium concentration from 0.5 to 32.0 mM was maintained for 1 week using Hoagland & Arnon solution. The calcium content of the leaf was proportionally increased to the concentration of the nutrient in the solution (r = 0.912). In contrast, the severity of soft rot symptom in the young leaves was inversely related with the amount of calcium supplied to the nutrient solution (r = 0.899). Water-soluble chitosan, prepared by hollow fiber filtration (> 100 kDa) was applied into the nutrient solution from 0.0 to 5,000 ppm. The chitosan of 10 ppm was the most effective to promote calcium uptake of the leaf, showing 155% of the control. The same chitosan solution prohibited most soft rot development of the leaf by Pcc, exhibiting only 53% of the control. Among different molecular weight fractions, chitosan fraction obtained from 30-100 kDa molecular weight cut-off promoted calcium uptake the most up to 163% of the control, and reduced the development of soft rot disease recording merely 36% of the control of the leaf tissue. The results obtained in the present study suggest that large scale production of water-soluble chitosan with an optimum molecular weight and its commercial application to Chinese cabbage production will be important to improve yield and quality of the crop.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.6
• /
• pp.807-818
• /
• 2004

The antibacterial activities of several types of chitosan were measured against Staphylococcus aureus and evaluated for their application to antibacterial textile finishing. The ％ reduction of bacteria of the chitosans prepared in our laboratory were between 72 and 87%. The two water-soluble chitosans with molecular weights 1,000 and 3,000 did not show antibacterial activities. The deacetylation of chitosan was appeared to increase antibacterial activity. The ％ reduction in bacterial density of the 86％-deacetylated chitosan solution was 56% where that of the 76％-deacetylated chitosan solution was only 17％ at 0.1% chitosan concentration. Molecular weights of the chitosans seemed not to affect antibacterial activities of chitosans. The antibacterial activity of the acid-soluble, 86%-deacetylated chitosan with 4 cps showed 98% of the ％ reduction at the level of 0.2％ chitosan. The ％ reduction of bacteria of this chitosan was higher at the higher concentration of acetic acid in the chitosan-bacterial mixture. The antibacterial activity was increased with the pH change over the range of 4.0 to 6.5. The 100% of the ％ reduction of bacteria was achieved within 4 hour incubation of the chitosan-bacterial mixture. According to the data obtained from the above experiments, the four chitosans among the six prepared in our laboratory were proved to be valuable for antibacterial textile finishing.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.914-917
• /
• 2002

• Macromolecular Research
• /
• v.14 no.5
• /
• pp.573-578
• /
• 2006

Three different, polymer-platinum conjugates (hydrogels, microparticles, and nanoparticles) were synthesized by complexation of cis-dichlorodiammineplatinum(II) (cisplatin) with partially succinylated glycol chitbsan (PSGC). Succinic anhydride was used as a linker to introduce cisplatin to glycol chitosan (GC). Succinylation of GC was investigated systematically as a function of the molar ratio of succinic anhydride to glucosamine, the methanol content in the reaction media, and the reaction temperature. By controlling the reaction conditions, water-soluble, partially water-soluble, and hydrogel-forming PSGCs were synthesized, and then conjugated with cisplatin. The complexation of cisplatin with water-soluble PSGC via a ligand exchange reaction of platinum from chloride to the carboxylates induced the formation of nano-sized aggregates in aqueous media. The hydrodynamic diameters of PSGC/cisplatin complex nano-aggregates, as determined by light scattering, were 180-300 nm and the critical aggregation concentrations (CACs), as determined by a fluorescence technique using pyrene as a probe, were $20-30{\mu}g/mL$. The conjugation of cisplatin with partially water-soluble PSGC, i.e., borderline between water-soluble and water-insoluble PSGC, produced micro-sized particles $<500{\mu}m$. Cisplatin-complexed PSGC hydrogels were prepared from water-insoluble PSGCs. All of the cisplatin-incorporated, polymer matrices released platinum in a sustained manner without any significant initial burst, suggesting that they may all be useful as slow release systems for cisplatin. The release rate of platinum increased with the morphology changes from hydrogel through microparticle to nanoparticle systems.

• Korean Journal of Materials Research
• /
• v.21 no.2
• /
• pp.125-132
• /
• 2011

Fibrous chitosan membranes were fabricated as a substrate for skin applications using an electro-spinning process with different solvents and varying concentrations. Scanning electron microscopy (SEM) images confirmed that the formation of the chitosan fibrous membrane in trifluoroacetic acid was better than that in acetic acid. Fourier transform infrared spectroscopy showed that the chitosan fibers were cross-linked with glutaraldehyde, and that the cytotoxicity of the aldehyde groups was reduced by glycine and washing by NaOH and DI water. Chitosan cross-linked fibrous membranes were insoluble in water and could be washed thoroughly to wash away glycine and excess NaOH and prevent the infiltration of other water soluble bio-toxic agents using DI water. MTT assay method was employed to test the cytotoxicity of chitosan membranes during fabricating, treating and washing processes. After the dehydration of cell cultured chitosan membranes, cell attachment behavior on the material was evaluated using SEM method. Effect of the treatment processes on the biocompatibility of the chitosan membranes was shown by comparing of filopodium and lamellipodium of fibroblast cells on grown washed and unwashed chitosan fibrous membrane. The MTT assay and SEM morphology confirmed that the washed chitosan fibrous membrane increased cell attachment and cell growth, and decreased toxicity compared to results for the unwashed chitosan fibrous membrane.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.529-529
• /
• 2012

Dispersion of carbon nanotubes in biocompatible media are of particular interest for diverse biomedical and nanomedicine applications. Various biomolecules and biopolymers such as DNA, proteins, poly L-lysine, starch, gelatin, steroid biosurfactants, and chitosan have shown capability for the effective dispersion of carbon nanotubes in water. Chitosan has demonstrated capacity for effective dispersion of single-walled carbon nanotubes (SWCNTs) in acidic medium and it also showed tendency to preferentially disperse smaller diameter nanotubes. Chemical functionalizations of chitosan enable its solubility in neutral pH water by reducing the intra and inter molecular hydrogen bonding. Herein, we present a neutral pH water soluble chitosan derivative, chitosan-hydroxyphenyl acetamide (CHPA), obtained by functionalizing the amino groups of chitosan with 4-hydroxyphenyl acetic acid, as an efficient biocompatible dispersant for debundling and solubilization of SWNTs in neutral aqueous solutions. Various process conditions for individual dispersion of SWCNTs are analyzed based on optical absorption and Raman spectroscopy.