• Journal of Environmental Science International
• /
• v.28 no.1
• /
• pp.107-123
• /
• 2019

The aerosol chemical components in $PM_{2.5}$ in several regions (Seoul, Busan, Daejeon, and Jeju Island) were investigated with regard to their concentration characteristics and optical properties. The optical properties of the various aerosol components (e.g., water-soluble, insoluble, Black Carbon (BC), and sea-salt) were estimated using hourly and daily aerosol sampling data from the study area via a modeling approach. Overall, the water-soluble component was predominant over all other components in terms of concentration and impact on optical properties (except for the absorption coefficient of BC). The annual mean concentration and Aerosol Optical Ddepth (AOD) of the water-soluble component were highest in Seoul (at the Gwangjin site) ($26{\mu}g/m^3$ and 0.29 in 2013, respectively). Further, despite relatively moderate BC concentrations, the annual mean absorption coefficient of BC ($21.7Mm^{-1}$) was highest in Busan (at the Yeonsan site) in 2013, due to the strong light absorbing ability of BC. In addition, high AODs for the water-soluble component were observed most frequently in spring and/or winter at most of the study sites, while low values were noted in summer and/or early fall. The diurnal variation in the AOD of each component in Seoul (at the Gwangjin site) was slightly high in the morning and low in the afternoon during the study period; however, such distinctions were not apparent in Jeju Island (at the Aweol site), except for a slightly high AOD of the water-soluble component in the morning (08:00 LST). The monthly and diurnal differences in the AOD values for each component could be attributed to the differences in their mass concentrations and Relative Humidities (RH). In a sensitivity test, the AODs estimated under RH conditions of 80 and 90% were factors of 1.2 and 1.7 higher, respectively, than the values estimated using the observed RH.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.78-87
• /
• 2013

Even though the notice No. 2010-11 of the Ministry of Food and Drug Safety Administration that has been applied to analyze the content of the water soluble residue eluted from multi-layer paperboard was abolished in 2011, its application for the analysis on evaporation residue is still valid. There are very high possibilities that the noticed existing method gives the misleading result on the evaporation residue due to the water soluble starch eluted from the multi-layer paperboard. The quantitative analysis on water-soluble residue with starch content correction has been carried in the study using UV/Vis spectroscopy and HPLC. The UV/Vis spectroscopy absorbance analysis showed the large amount of the oxidized starch obtained from the aqueous residue eluted out of the multi-layer paperboard after the iodine, ${\alpha}$-amylase reaction, and starch hydrolysis. The residual content decreased by the correction through the enzyme hydrolysis.

• Korean Journal of Pharmacognosy
• /
• v.42 no.1
• /
• pp.82-88
• /
• 2011

This study was carried out to investigate the optimum conditions for extraction of soluble acidic polysaccharides from ginseng marc. Method of carbazole-sulfuric acid was applied to determine the amount of acidic polysaccharides in ginseng marc. The amounts of soluble acidic polysaccharides in water extract of ginseng marc were increased with increasing extraction temperature. The contents of acidic polysaccharides were not significantly different despite the extraction time increasing from 0.5 hours to 6 hours. To estimate the rehydration rate of the freeze dried polysaccharide, the extracted acidic polysaccharide fraction powder was determined the amount of soluble acidic polysaccharides by carbazole-sulfuric acid method again. The rehydration rate of acidic polysaccharides from water-extract of red ginseng marc at room temperature was 100%. On the other hand, the rehydration rate of acidic polysaccharide of red ginseng marc at boiling temperature was about 50%. The rehydration rate of acidic polysaccharides from water-extract of white ginseng marc at room temperature was 50%. The rehydration rate of acidic polysaccharide of red ginseng marc at boiling temperature was about 40%. The rate of soluble acidic polysaccharide of Red Ginseng is higher than that of White Ginseng. We can find out the maximum extraction method of soluble acidic polysaccharide from ginseng marc.

• Korean Journal of Agricultural Science
• /
• v.16 no.2
• /
• pp.201-211
• /
• 1989

This experiment was carried out to study the practical utility of Mucor rennet in making Blue cheese and to investigate the changes in the level of various nitrogen compounds. 1. The Mucor rennet cheese, the calf rennet cheese and the mixed rennet cheese did not show any significant difference in their yields. 2. The dry matter contents of Blue cheese was increased during the ripening and the levels of Mucor rennet did not have any influence in these respect. 3. The water soluble nitrogen contents of Blue cheese increased during ripening. On 0 day of ripening the Mucor rennet cheese contained water soluble nitrogen than the calf rennet cheese. On 40 days of ripening the mixed cheese contained less water soluble nitrogen than the calf rennet cheese. 4. Non protein nitrogen, peptone amino nitrogen, water soluble protein nitrogen, proteose nitrogen and peptone nitrogen appeared to contain similar levels of water soluble nitrogen. 5. The results of electrophoresis indicated a greater degredation on as-casein and ${\beta}$-casein in the Blue cheese made with Mucor rennet than in those made with calf rennet. On 60 days of ripening the mixed cheese more casein than did the Mucor rennet cheese. 6. The free amino acid contents of the Mucor rennet cheese was higher than the calf rennet cheese at 60 days of ripening.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.1
• /
• pp.35-47
• /
• 2011

For the synthesis of water soluble acrylic modified epoxyester resin, fatty acid/epoxy ratio of 50/50 was used, and introduced maleic anhydride. Ratio of styrene/acrylic acid of acrylic monomers was fixed 85/15 and ratio of epoxyester/acrylic monomer was controlled 80/20, 75/25, 70/30, 65/35, and degree of neutralization were changed 65%, 80%, to 100%. As a result, 40% solids acrylic modified epoxyester resins were synthesized. Resins were evaluated water soluble stability, drying time, water resistant, storage stability and physical properties. And the white paints were prepared, and were evaluated viscosity, drying time, water resistance, adhesion, sagging, spray workability, gloss, salt spray resistance, skinning, whiteness and flash rust. As a result, the degree of neutralization of 100% and the ratio of epoxyester/acrylic monomer of 75/25 showed the best properties.

• Macromolecular Research
• /
• v.12 no.3
• /
• pp.263-268
• /
• 2004

We have synthesized a water-soluble polyimide precursor, poly(amic acid) amine salt (PAD), from pyromellitic dianhydride (PMDA), 4,4'-oxydianiline, and N,N -dimethylethanolamine (DMEA) and have investigated in detail its properties with respect to the degree of salt formation (D$\_$sf/). The maximum value of D$\_$sf/ we obtained upon precipitation of the precursor solution into acetone was 79%. We synthesized a PAD having a D$\_$sf/ of 100% (PAD100) by the solid state drying of an organic solution. The precursors showed different solubility depending on the D$\_$sf/ to make up to 4 wt% solutions in water containing a small amount of DMEA. PAD100 is completely soluble in pure water. We investigated the imidization behavior of PAD in aqueous solution using various spectroscopic methods, which revealed that PAD 100 has faster imidization kinetics relative to that of the poly(amic acid)-type precursors. The resulting polyimide films prepared from an aqueous precursor solution possess almost similar physical and thermal properties as those prepared from N-methyl-2-pyrrolidone(NMP) solution. Therefore, we have demonstrated that PAD can be used as a water-based precursor of polyimide; this procedure avoids the use of toxic organic solvents, such as NMP.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.2
• /
• pp.39-44
• /
• 2023

This study was conducted to analyze problems related to non-water-soluble sanitary products during the treatment of water regeneration centers in E.T.F. and S.T.F. at a time when the demand and supply of non-water-soluble sanitary products are increasing. As a result, the improvement plan of the W.R.C. should focus on pretreatment facilities. When replacing facilities in the future, various dust removers suitable for the facility's reality will be installed in the pretreatment of S.T.F., and it is proposed to link a bar-racks screen with a comprehensive treatment device or install a comprehensive treatment device for impurities alone in the pretreatment of E.T.F.. In addition, a microscreen screen must be installed on the front end of the excretory treatment unit. to separate non-water-soluble materials, and it is necessary to secure a maintenance space for the excretory treatment unit.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.288-288
• /
• 1996

The microcapsules containing ethanol in a water-soluble polymer shell could be formed by the spray-drying technique. A mixed solution of ethanol, water and a water-soluble polymer is spray-dried at the lowest possible temperature to obtain a powder product in which the water is substantially removed and the ethanol is encapsulated in water-soluble polymer shell because of the hydrophillic property of polymer and permeability difference between ethanol and water. In this study, the effect of sodium lauryl sulfate (SLS) on the ethanol content, ethanol encapsulation efficiency and yield were investigated to maximize the microencapsulation of ethanol.

• Journal of Pharmaceutical Investigation
• /
• v.16 no.3
• /
• pp.101-105
• /
• 1986

The changes of water absorption and surface area of polydimethylsiloxane-5-fluorouracil devices containing different water soluble additives such as sodium chloride, glycerine, poly-propylene glycol(PPG 400), and polyethylene oxide(PEO 400, 400 and 2000) were investigated. It was confirmed that carriers controlled water absorption and swelling of the devices in the aqueous solutions. The water absorption and the swelling were affected by the osmotic pressure and ionic strength of the aqueous solutions.

• The Journal of Internal Korean Medicine
• /
• v.19 no.2
• /
• pp.300-316
• /
• 1998

The various oriental herbal medicines, which have usually been used for treatment of reducing fever, purging intense heat and detoxication, were screened to determine the antibacterial activity and the minimal inhibitory concentration against antibiotics-resistant Staphylococcus aureus. The results obtained were as follows: 1. Among the 23 oriental medicines tested, the water-soluble extract of Coptis japonica showed very excellent antibacterial activity against antibiotics-sensitive and -resistant S. aureus. A little activity was found in the extracts of Scutellaria baicalensis, Eriobotrya japonica and Prunus mume against antibiotics-sensitive S. aureus and in that extracts of P. mume, Schizandra chinensis and S. baicalensis against antibiotics-resistant S. aureus. When C japonica was used, the high antibacterial activity was shown against Bacillus subtilis and other extracts showed a little or no antibacterial activity against B. subtilis and E. coli as a control. 2. The highest antibacterial activities against antibiotics-resistant S. aureus were found in the ethanol-soluble extract of C japonica. Other ethanol-soluble extracts of S, baicalensis, S. chinensis and P. mume showed a little activity against both antibiotics-sensitive and antibiotics-resistant S. aureus. 3. Among the medicinal herbs tested, the water- and ethanol extracts of C. japonica showed very excellent antibacterial activity against the pathogenic S. aureus and both Escherichia coli and Bacillus subtilis used as a control. 4. When the water-soluble extracts of C. japonica and S. baicalensis, minimal inhibitory concentrations (MICs) against antibiotics-sensitive S. aureus were $20mg/m{\ell}\;and\;30mg/m{\ell}$, respectively. The MICs of the ethanol-soluble extracts of C. japonica and P. scabriosaefolia were $7.5mg/m{\ell}\;and\;12mg/m{\ell}$, respectively. 5. For the MICs against antibiotics-resistant S. aureus, the water-soluble extracts of C. japonica and P. mume showed $15mg/m{\ell}\;and\;10mg/m{\ell}$, respectively. The MICs of the ethanol-soluble extracts of C. japonica and P. mume were $13mg/m{\ell}\;and\;20mg/m{\ell}$, respectively. As a result, the highest antibacterial activity was found in both water- and ethanol-soluble extracts of C. japonica against antibiotics-resistant S. aureus. And the water- and ethanol-soluble extracts of S. baicalensis, S. chinensis and P. mume showed comparatively high antibacterial activities against both antibiotics-sensitive and -resistant S. aureus.