• 한국가정과학회지
• /
• 제5권2호
• /
• pp.33-43
• /
• 2002

This study was investigated textural properties of Injulmi affected by milling methods, varieties and added water volume. Sinsunchalbyeo and Hwasunchalbyeo flours were made using Rin-dry milling(PDM) and roll-wet milling(RWM) methods. The proximate composition of waxy rice starches and waxy rice flours were similar. Water binding capacity, soluble carbohydrate and damaged starch of waxy rice flour by RWM: were higher than those of waxy rice flours by PDM. By increasing added water volume, hardness and adhesiveness of Injulmi were decreased. By increasing storage time, hardness of Injulmi was increased, but adhesiveness was decreased. The hardness of Injulmi made from waxy rice flours by PDM was higher than by RDW.

• 한국산업융합학회 논문집
• /
• 제27권3호
• /
• pp.601-607
• /
• 2024

The discharge of oily wastewater into water bodies and soil poses a serious hazard to the environment and public health. Various conventional techniques have been employed to treat oil-water mixtures and emulsions; Unfortunately, these approaches are frequently expensive, time-consuming, and unsatisfactory outcomes. Porous materials and adsorbents are commonly used for purification, but their use is limited by low separation efficiencies and the risk of secondary contamination. Recent advancements in nanotechnology have driven the development of innovative materials and technologies for oil-contaminated wastewater treatment. Nanomaterials can offer enhanced oil-water separation properties due to their high surface area and tunable surface chemistry. The fabrication of nanofiber membranes with precise pore sizes and surface properties can further improve separation efficiency. Notably, novel technologies have emerged utilizing nanomaterials with special surface wetting properties, such as superhydrophobicity, to selectively separate oil from oil-water mixtures or emulsions. These special wetting surfaces are promising for high-efficiency oil separation in emulsions and allow the use of materials with relatively large pores, enhancing throughput and separation efficiency. In this study, we introduce a facile and scalable method for fabrication of superhydrophobic-superoleophilic felt fabrics for oil/water mixture and emulsion separation. AlN nanopowders are hydrolyzed to create the desired microstructures, which firmly adhere to the fabric surface without the need for a binder resin, enabling specialized wetting properties. This approach is applicable regardless of the material's size and shape, enabling efficient separation of oil and water from oil-water mixtures and emulsions. The oil-water separation materials proposed in this study exhibit low cost, high scalability, and efficiency, demonstrating their potential for broad industrial applications.

• 접착 및 계면
• /
• 제9권2호
• /
• pp.24-31
• /
• 2008

본 연구에서는 EVA 에멀젼에 내수성 및 기계적 특성을 향상시키기 위하여 금속 이온 가교제인 calcium hydroxide 및 magnesium carbonate를 사용하여 이온성 가교결합을 도입하였다. EVA 에멀젼 필름의 가교밀도, 열적특성, 표면자유에너지 그리고 인장강도, 파단신율 및 인열강도 특성을 고찰하였다. 금속 이온 가교제 양이 증가함에 따라 EVA 에멀젼의 가교밀도는 증가하였고, 이에 내수성과 $T_g$ 값도 증가하였다. 그러나 EVA 에멀젼 필름의 표면에너지 및 기계적 특성들은 다소 다른 거동을 보였다. Calcium hydroxide 0.4% 그리고 magnesium carbonate 0.5%를 첨가한 경우가 EVA 에멀젼에 강한 이온성 가교결합이 형성되어 가장 높은 표면 자유에너지 값과 인장강도 및 인열강도를 보였다. 그러므로 본 연구에서 calcium hydroxide 및 magnesium carbonate와 같은 금속 이온 가교제가 EVA 에멀젼의 내수성과 기계적 물성을 향상시킴을 확인하였다.

• Composites Research
• /
• 제30권4호
• /
• pp.235-240
• /
• 2017

아교는 수용성을 띄는 접착제로, 이 특징에 의해 물에 약하다는 단점에도 불구하고 전통적인 고가구에 많이 사용되어 왔다. 이러한 단점을 개선하기 위하여 많은 연구가 진행되고 있다. 본 연구에서는 탄소나노튜브를 도입에 따른 아교의 계면특성 및 열적특성 그리고 방수특성 개선에 대한 연구를 진행하였다. 탄소나노튜브의 비율이 증가함에 따라 아교를 이용하여 접착한 돌침대용 목재 샌드위치 판 상부의 실시간 온도측정을 진행하였다. 나무와 아교접착제 간의 계면특성의 변화를 알아보기 위하여 랩 전단 실험을 실시하였고, 습도가 높아짐에 따라 물성이 약해지는 아교의 단점을 개선하기 위하여 탄소나노튜브를 도입에 따른 아교의 방수특성이 개선되는지 대한 실험을 진행하였다. 랩 전단시편을 물에 담근 후 랩 전단 실험을 진행하여 기존의 결과와 비교하여 차이가 얼마나 나는지 비교하였다. 이를 증명하기 위하여 물과의 정적 접촉각을 이용해 탄소나노튜브의 함량에 따른 아교접착제의 소수성 정도를 비교하였다. 실험결과 아교 접착제에 탄소나노튜브를 도입으로 계면특성, 열적특성 및 방수특성이 개선되었다.

• 한국철도학회논문집
• /
• 제11권4호
• /
• pp.357-363
• /
• 2008

본 연구에서는 염수분무환경에 노출된 철도차량 차체용 탄소섬유/에폭시 복합재의 내구성을 조사하였다. 염수환경시험을 위해서는 해수와 가장 유사하도록 5% 염화나트륨 염수용액을 제조하여 사용하였다. 본 연구에 적용된 시편은 T700 탄소섬유직물을 에폭시 수지에 함침시킨 형태의 복합재 평판에서 채취하였다. 기계적 특성 시험을 통해 인장특성, 굽힘특성, 전단특성을 평가하였으며 동역학 측정장치를 통해 저장탄성계수, 손실탄성계수, 그리고 tan $\delta$ 등의 열분석 특성을 평가하였다. 또한 적외선 분광분석을 통해 노출기간에 따른 화학구조 변화도 조사하였다. 연구결과에 따르면 강화섬유가 지배적인 역할을 하는 기계적 특성은 염수환경에 영향을 받지 않지만 수지가 지배적인 역할을 하는 기계적 특성은 노출기간이 길어짐에 따라 점차 감소하는 양상을 나타낸다. 저장탄성계수는 노출기간에 큰 영향을 받지는 않지만 유리전이온도는 염수환경에 영향을 받으며 노출기간이 길어지면 감소하는 양상을 나타낸다. FT/IR 선도에서 관찰된 피크의 세기는 노출기간에 다소 영향을 받지만 피크의 형상과 위치는 노출 기간에 따른 변화가 관찰되지 않는다. 이로 미루어 볼 때 본 연구에 적용된 탄소섬유/에폭시 복합재는 염수환경에 비교적 안정함을 알 수 있다.

• 한국의류학회지
• /
• 제34권11호
• /
• pp.1798-1811
• /
• 2010

This research evaluates the changes in the comfort-related properties of high-density fabric, such as moisture permeability and waterproofness, in order to assess the relative importance of laundry conditions for clothing properties after repeated laundering and suggest the best laundering conditions for high-density fabric through the identification of the most influential factor. A commercial high-density fabric was washed 25 times in a drum-type washer using nine different laundry conditions based on profiles derived from a fractional factorial design. To evaluate the changes in the comfort-related properties of the fabric, pore size, air permeability, water vapor transport, water repellency, and water resistance were measured. The comfort-related properties of the fabric deteriorated after repeated laundering by the damaged surface finish; in addition, the damaged surface also changed the pore size. As a result, the water repellency and water resistance decreased. The detergent was the most responsible factor to change the properties among the four factors of detergent, hardness, temperature, and RPM. The best laundering conditions for the fabric was a neutral detergent, soft water of 70ppm, a temperature of $15^{\circ}C$, and 30rpm.

• 접착 및 계면
• /
• 제17권3호
• /
• pp.96-103
• /
• 2016

본 연구에서는 셀룰로스계 천연섬유인 대나무와 poly(lactic acid) (PLA)로 구성된 펠렛을 압출공정으로 제조하고, 여러 가지 함량의 대나무섬유/PLA 바이오복합재료를 사출공정을 통해 성형하였다. 바이오복합재료의 굴곡, 인장, 충격 특성 및 열변형온도에 미치는 대나무섬유의 수처리 영향을 조사하였다. 천연섬유의 열안정성, 바이오복합재료의 굴곡특성, 인장탄성률 및 충격특성은 섬유 함량은 물론 수처리 유 무에 의존한 반면, 열변형온도는 주로 수처리에 의해 영향을 받았다. 바이오복합재료의 기계적 특성과 충격특성의 증가는 이를 구성하고 있는 대나무섬유와 PLA 매트릭스 사이의 계면결합력이 대나무섬유의 수처리에 의해 향상되었기 때문이다. 연구결과는 친환경적이고 작업친화적인 물을 이용한 천연섬유의 전처리가 바이오복합재료의 성능을 향상시키는데 기여할 수 있다는 것을 제시하여 준다.

• Archives of Pharmacal Research
• /
• 제28권4호
• /
• pp.493-501
• /
• 2005

Effect of solvents on physical characteristics and release characteristics of monolithic acetaminophen (APAP) hydroxypropylmethylcellulose (HPMC) matrix granules and tablets were examined. Various types and amounts of solvents were employed for granulation and coating. APAP and other excipients were mixed and were then wet-granulated in a high-speed mixer. The dried granules were then directly compressed and film-coated with low viscosity grade HPMC. As the amount of water increased, the size of granules also increased, showing more spherical and regular shape. However, manufacturing problems such as capping and lamination in tableting occurred when water was used alone as a granulating solvent. The physical properties of HPMC matrix granules were not affected by the batch size. The initial release rate as well as the amount of APAP dissolved had a tendency to decrease as the water level increased. Addition of nonaqueous solvent like ethanol to water resulted in good physical properties of granules. When compared to water/ethanol as a coating solvent, the release rate of film-coated HPMC matrix tablets was more sensitive to the conditions of coating and drying in methylene chloride/ethanol. Most of all, monolithic HPMC matrix tablet when granulated in ethanol/water showed dual release with about $50\%$ drug release immediately within few minutes followed by extended release. It was evident that the type and amount of solvents (mainly water and ethanol) were very important for wet granulation and film-coating of monolithic HPMC matrix tablet, because the plastic deforming and fragmenting properties of material were changed by the different strengths of the different solvents.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.69-72
• /
• 2003

This study is intended to investigate the fundamental properties of concrete which AE water reducing agent for reduction of bleeding is used, and the properties of bleeding reduction. According to the results, when the adding ratio of AE water reducing agent for reduction of bleeding increases, a range of normal fluidity and aimed air content arc satisfied, setting time is faster than that of normal AE water reducing agent. And bleeding amount decreases, bleeding speed is highest between 60 and 90 min, and sinking depth increases drastically in 60 min. When, AE water reducing agent for reduction of bleeding is added, compressive strength shows a slight variation by air content, but there is not a large influence by addition of AE water reducing agent for reduction of bleeding. Synthetically, it proves that AE water reducing agent for reduction of bleeding satisfies aimed air content in the range of normal slump and can reduce only bleeding without quality variation of compressive strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.69-72
• /
• 2003

This study is intended to investigate the fundamental properties of concrete which AE water reducing agent for reduction of bleeding is used, and the properties of bleeding reduction. According to the results, when the adding ratio of AE water reducing agent for reduction of bleeding increases, a range of normal fluidity and aimed air content are satisfied, setting time is faster than that of normal AE water reducing agent. And bleeding amount decreases, bleeding speed is highest between 60 and 90 min, and sinking depth increases drastically in 60 min. When. AE water reducing agent for reduction of bleeding is added, compressive strength shows a slight variation by air content, but there is not a large influence by addition of AE water reducing agent for reduction of bleeding. Synthetically, it proves that AE water reducing agent for reduction of bleeding satisfies aimed air content in the range of normal slump and can reduce only bleeding without quality variation of compressive strength.