• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.337-340
• /
• 2008

When high surge voltage invaded into the ground rod contacted with ground water, the ionization phenomena are happened in the water. Although some researchers have surveyed the ionization phenomena in soil, they have just analyzed the variation of the ground resistance. The most important role of the ground rod is to elect human beings from potential rise and to dissipate energy to the earth safely. In this wort we presented the method evaluating the potential reduction and energy dispersion. Also we analyzed theses factors as a function of charging voltages at the water resistivity of $50\;{\Omega}{\cdot}m$ using the Matlab Program. As a result the ground rod potential was reduced to 38 kV by ionization just below breakdown voltage. The energy more than half of the total injected energy was dispersed through the grounding electrode caused due to ionization.

• Corrosion Science and Technology
• /
• v.22 no.3
• /
• pp.153-163
• /
• 2023

Two types of accelerated tests, Water Drop Test (WDT) and Temperature-Humidity-Bias Test (THBT), can be used to evaluate the susceptibility to electrochemical migration (ECM). In the WDT, liquid water is directly applied to a specimen, typically a patterned conductor like a printed circuit board. Time to failure in the WDT typically ranges from several seconds to several minutes. On the other hand, the THBT is conducted under elevated temperature and humidity conditions, allowing for assessment of design and life cycle factors on ECM. THBT is widely recognized as a more suitable method for reliability testing than WDT. In both test methods, localized corrosion can be observed on the anode. Composition of dendrites formed during the WDT is similar to that formed during THBT. However, there is a lack of correlation between the time to failure obtained from WDT and that obtained from THBT. In this study, we investigated the relationship between electrochemical parameters and time to failure obtained from both WDT and THBT. Differences in time to failure can be attributed to actual anode potential obtained in the two tests.

• Journal of Environmental Science International
• /
• v.23 no.9
• /
• pp.1655-1662
• /
• 2014

A comprehensive fractionation technique was applied to a set of water samples obtained along drinking water treatment process with ozonation and biological activated carbon (BAC) process to obtain detailed profiles of dissolved organic matter (DOM) and to evaluate the haloacetic acid (HAA) formation potentials of these DOM fractions. The results indicated that coagulation-sedimentation-sand filtration treatment showed limited ability to remove hydrophilic fraction (28%), while removal of hydrophobic and transphilic fraction were 57% and 40%, respectively. And ozonation and BAC treatment showed limited ability to remove hydrophobic fractions (6%), while removal of hydrophilic and transphilic fractions were 25% and 18%. The haloacetic acid formation potential (HAAFP)/dissolved organic carbon (DOC) of hydrophilic fraction was the highest along the treatment train and HAAFP/DOC of hydrophilic fraction was higher than hydrophobic and transphilic fraction as 23%~30%, because of better removal for hydrophobic fraction both in concentration and reactivity.

• The Plant Pathology Journal
• /
• v.16 no.4
• /
• pp.206-210
• /
• 2000

The effect of the electrolyzed oxidizing water on Sphaerotheca fuliginea was investigated with germination and sporulation of the fungal conidia. The sporulation was inhibited by the electrolyzed oxidizing water of pH 2.5, 3.5, and 4.5, but was not inhibited by the distilled water adjusted pH with 1N-HCL solution. However, the electrolyzed oxidizing water did not affect conidial germination. The oxidation-reduction potential at pH 2.5 and pH 3.5 of electrolyzed oxidizing water were 1130 mV and 1060 mV, respectively, but those of distilled water adjusted with HCL solution were 550 mV and 490 mV, respectively. When the electrolyzed oxidizing water of ORP over 1100 mV was sprayed on cucumplanting, the disease severities of powdery mildew were about 8.5% and 19.2%, respectively. Disease severity of a standard control (triflumizole 30% WP, $500\textrm{mg}\textrm{/L}$) was about 3.0%, while that of plants without electrolyzed oxidizing water was to 45.8%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.26 no.4
• /
• pp.284-288
• /
• 1993

Tow Kinds of Soils, vertisol and alfisol, were selected and analyzed pore space distribution(PSD) by mercury intrusion method and soil water potential after freeze-drying from different water conditions, such as 0.033MPa, 1.5MPa and ovendry. The PSD values measured by mercury intrusion method were higher in large pores than the values from soil water potential. Also, there were big differences of PSD by the changes of the water content befor freeze-drying.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.4
• /
• pp.241-244
• /
• 2000

This experiment was conducted to evaluate the effect on evapotranspiration and yield of soybean according to different soil water conditions, and to find the optimum time and amount for irrigation in soybean cultivation. The difference between potential evapotranspiration (PET) and maximum evapotranspiration (MET) during growing season of soybean planted in lysimeter was higher during reproductive stage than during vegetative one. The maximum crop coefficient was obtained at beginning seed stage of soybean. Soil water coefficient of irrigation treatment was higher than that of non-irrigation treatment during soybean growth stage in field experiment. Grain yield was highest in lysimeter due to its high water use efficiency and evapotranspiration rate.

• The Korean Journal of Ecology
• /
• v.10 no.3
• /
• pp.151-159
• /
• 1987

Relationships between soil factors and the growth of annual ring of Pinus densiflora grown on stony mountain were investigated at two sites of the different parent rocks: the one was formed by granite at Mt. Gwanag, Seoul and the other feldspar porphyry at Mt. Bipa, Daegu. The growth of annual ring was influenced by the physical factors of soil, such as soil depth, field caacity and water content of soil, rather than by the KDICical factors, such as total nitrogen, potassium, and calcium of soil. Of the soil factors affecting the growth of annual ring, soil depth, field capacity, water content of soil and organic matter closely interrelated with each other. All of these factors influenced water content of soil which might affect the water potential of Pinus densiflora leaves. In fact, the leaf water potential, affecting as the main factor for the growth of annual ring, of the pine grown in a deep soil was higher than that of the pine in a shallow soil.

• Journal of Korean Society on Water Environment
• /
• v.21 no.6
• /
• pp.595-601
• /
• 2005

In this research, effects of water circulation on phosphorus release from sediment into water body were studied. Sediments sampled at the Daechung Lake were used for the column experiments with circulation and non-circulation conditions. Deaeration coefficient, $K_1$ and reaeration coefficient, $K_2$ of non-circulation condition were 0.133 and 0, respectively, while $K_1$ and $K_2$ for circulation condition were 0.46 and 0.018, respectively. Oxidation Reduction Potential (ORP) showed a linear relationship with dissolved oxygen (DO) when DO is over 2 mg/L. Phosphorus concentration induced by phosphorus release from sediment was highly dependent upon DO, ORP, and pH. Under anaerobic condition, phosphorus release rate was higher for $Fe^{2+}$-bounded phosphorus compared to that of $Ca^{2+}$-bounded phosphorus.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.2
• /
• pp.171-176
• /
• 2011

Organic matters that comprise a tiny part of seawater generally occur over 50% of membrane fouling in Reverse Osmosis Process. This study evaluates Foundation efficiency of reverse osmosis membranes under brackish and seawater conditions and resistance of organic fouling. Moreover, analyzing the membrane surface through roughness, contact angle and zeta potential results in roughness and contact angle are proportional to flux decline rate (FDR), yet FDR has high value when zeta potential is low level. Furthermore, with various membrane fouling of different raw water conditions, the flux tends to improve when pH value is high and raw water which is complex with organic and cation pollutes membrane faster than organic separated raw water condition.

• Textile Coloration and Finishing
• /
• v.9 no.2
• /
• pp.10-16
• /
• 1997

Merino wool top and fabric have been treated with steams such as superheated steam or high pressure steam. Moisture regain, water absorbency, water penetration, zeta potential, ESCA, SEM, and dyeing behavior were studied. Negative electric potential on the surface of wool fibers by steam treatment became higher than untreated. From the results of ESCA measurement, intensity of $O_{1s}$ was increased by steam treatment. Rate of dyeing and saturation dye exhaustion of wools increased by steam treatment, especially high pressure steam treatment. Moisture regain, water absorbency, water penetration, and surface appearances by SEM photographs of the steam-treated wools didn't change. There is no relationship between dyeing of the steam-treated wool and wettability to water. Therefore It seems likely that relaxation of adhesive filler in interscale of wool by steam treatment accelerate dye penetration into the fiber.