• Macromolecular Research
• /
• v.11 no.6
• /
• pp.458-466
• /
• 2003

Several copolyimides have been synthesized with different combinations of comonomers in order to study the relationship between conductivity and water insolubility. m-Phenylenediamine (m-PDA), an angled comonomer, was introduced into the polymer backbone to increase water absorption, and resulted in higher proton conductivity. 2,2-bis(trifluoromethyl)benzidine (TFMB) was used as the comonomer to promote water insolubility. There is a good correlation between the water uptake and conductivity of the polyimides. The copolyimides that had high water uptake also generated high proton conductivity. Those polyimides had good mechanical properties. The copolyimides that have 27 mol% of TFMB and 9 mol% of m-PDA have reasonable conductivities and are insoluble in water at 90$^{\circ}C$, even though they have lower conductivities than those of the homopolymer.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2000.05a
• /
• pp.86-87
• /
• 2000

Chitosan (deacetylated form of chitin) possesses strong antibacterial activities such as antimicrobial effect, antifungal effect and the induction of plant defense response. Chitosan itself, however, has high molecular weight and viscosity as well as water-insolubility, These natures may restrict applications in various fields, especially in in vivo system. While the hydrolysates of chitosan, chitooligosaccharides (COS) are not only lower in the molecula. weight and viscosity, but also water-soluble. Thus, they would be expected more efficient absorption in vivo. Besides several documents have been reported antibacterial activities of COS against microorganisms (Kendra et al., 1989; Uchida et al., 1989). (omitted)

• Journal of Microbiology and Biotechnology
• /
• v.20 no.10
• /
• pp.1436-1439
• /
• 2010

Many studies have clarified that poly(${\gamma}$-glutamic acid) (PGA) increases the solubility of $Ca^{2+}$, suggesting that PGA enhances calcium absorption in the small intestine. However, there has been no report on the specific interaction between PGA and $Ca^{2+}$ in water. We studied the aqueous solution properties of PGA calcium salt (PGA-Ca complex). The chelating ability and binding strength of PGA for $Ca^{2+}$ were evaluated. The PGA-Ca complex was soluble in water, in contrast to the insolubility of poly(acrylic acid) (PAA) calcium salt, and the chelating ability of PGA for $Ca^{2+}$ was almost the same as that of PAA. The globular conformation of the PGA-Ca complex in water was estimated by SEC and viscosity measurements. The chelation ability of PGA for $Ca^{2+}$ was examined by $^1H$ NMR. The present study showing the characteristics of the PGA-Ca complex will provide useful information about the calcium absorption by PGA in vivo.

• International Journal of Oral Biology
• /
• v.32 no.2
• /
• pp.75-78
• /
• 2007

The periodontal diseases and dental caries are major infectious diseases in oral cavity. Many of the preventive and therapeutic dental products contain the antimicrobial and anti-inflammatory components. But some of these antimicrobial have weak points such as coloration, burning sensation and insolubility in water. We have screened the therapeutic herbal extracts of the Plant Extract Bank for the antimicrobial activity on the major dental pathogens by growth inhibition assay. For the Porphyromonas gingivalis, 8 herbal extracts had an antimicrobial activity, 11 herbal extracts for the Prevotella intermedia, 43 herbal extracts for the Haemophilus actinomycetemcomitans and 61 herbal extracts for the Streptococcus mutans. Among these extracts, 6 herbal extracts had an antimicrobial activity for more than 3 species of dental pathogens. These extracts are Araliae Cordatae Radix, Crassirhizomae Rhizoma, Mori Radicis Cortex, Psoraleae Semen, Pini Ramulus and Sieges- beckiae Herba. All of effective extracts were CA group, ethanol extracts. Among these 6 herbal extracts, only Crassirhizomae is known to have a antibacterial effects. Therefore these herbal extracts have a possibility to be a candidate for a major antibacterial components in dental products.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.217-218
• /
• 2023

This study is to develop porous concrete using super absorbent polymer, which possesses insolubility and high absorption capacity, as a substitute material for lightweight soil. Various mixtures were prepared using aggregates, cement, mixing water, and super absorbent polymer, and the absorption ratio and compressive strength were examined for each mixture. As the amount of super absorbent polymer added increased, the absorption ratio also increased, reaching up to 35-105%. However, the compressive strength decreased by 49.5% to 65.3%. This is believed to be due to the inherent properties of super absorbent polymer, which led to an increase in the absorption ratio but, in turn, reduced the binding strength of cement paste particles, resulting in a decrease in compressive strength.

• Korean Journal of Food Science and Technology
• /
• v.27 no.4
• /
• pp.631-634
• /
• 1995

Some structural characteristics of hot-water insoluble rice starch [3 varieties of Japonica type and 3 varieties of Tongil type(Japonica-Indica breeding type)]were investigated. The amylose contents of hot-water insoluble starches were 2.7-6.1%. The chain distributions of hot-water insoluble starches were composed of super long chain of above ${\overline{DP}}\;55$ (31.9-38.7%), B chain of ${\overline{DP}}\;40-50$ (12.3-18.0%) and A chain of ${\overline{DP}}\;10-20$ (48.5-50.4%). The chain distributions of hot-water insoluble starches and their ${\beta}-limit$ dextrin were difference between rice varieties and their were differ from those of amylopectin and their ${\beta}-limit$ dextrin. these result suggest that hot-water insolubility of rice starch was showed its characteristic on the varieties and it be responsible for the molecular structure of amylopectin.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.235-238
• /
• 2005

Sulfonated poly(ether sulfone) copolymers (PESs) were synthesized using hydroquinone 2-potassium sulfonate (HPS) with other monomers (bisphenol A and 4-fluorophenyl sulfone). PESs with different $mole\%$ of hydrophilic group were prepared by changing the mole ratio of HPS in the polymerization reaction. The chemical structure and the thermal stability of these polymers were characterized by using $^1H-NMR$, FT-IR and TGA techniques. The PES 60 membrane, which has $60 mole\%$ of HPS unit in the polymer backbone, has a proton conductivity of 0.091 S/cm and good insolubility in boiling water. The TGA showed that PES 60 was stable up to $272^{\circ}C$ with a char yield of about $29\%\;at\;900^{\circ}C\;under\;N_2$ atmosphere. To investigate the single cell performance, the catalyst coated PES 60 membrane was used and a single cell test was carried out using $H_2/O_2$ gases as fuel and oxidant at various temperatures. We observed that the cell performance was enhanced by increasing the cell temperature. A current density of $1400 mA/cm^2$ at 0.60 V was obtained at $70^{\circ}C$.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.13 no.2
• /
• pp.47-53
• /
• 1995

Photosensitive resin of azide type is good for resolution and inner solvent, but it is really problem to development of practical use because fanctional groups of polymer has many hydrophilic radicals. By careful attention to this point, this study was investigated synthesis term, photo property and development property of composed photosensitive resin of azida type, it is to this effect. 1) H-NMR spectrum of compared DABCI showed amion redical by $\delta$6.0~6.1ppm to substitude for azide radical by amino radical by $\delta$8.9~9.45ppm, and FT-IR absorption spectra showed the absorption bends at 2100cm. 2)FT-IR absorption spectra of PHS1-DAB, PHS2-DAB, CMM-DAB and CHM-DAB showed azida radical pick to be lost at after irradiation by UV light. 3) According to exposuer change of PHS1-DAB, PHS2-DAB, CMM-DAB and CHM-DAB, absorption maximum value of UV spectrum change was 280nm. 4) to compared relative sensitivity of compared photosensitive resin, PHS2-DAB was the best and to compared insolubility rate of compared photosensitive resin, CMM-DAB was the lower. 5)Solubility if NaOH was the best by 1.0mol/$\ell$ and solubility of developing solution of ethanol to water was it in the ratio of 4 to 1.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.153-153
• /
• 2008

Practical application of single-walled carbon nanotubes (SWCNTs) qualified as a promising material has been limited by either poor dispersion or their insolubility in aqueous or organic media due to formation of bundling by relatively high surface energy. Thus, major attention to overcome this issue has been paid at surface modification of CNTs by functionalization, but this introduces defects to the sidewall of CNTs, consequently perturbing the inherent electronic and optical properties. Therefore, using surfactants is a general approach to disperse SWCNTs with lower damages by which bundled nanotubes could be dispersed up to the level of individuals or small bundles. Here, we have investigated various surfactants for their efficiency in dissolving purified SWCNTs produced by arc discharge in deionized water. To compare the surfactants respectively, we have determined the least amount of each surfactant to suspend the nanotubes under optimized experimental conditions(CNT amount, sonication power, and centrifugation speed, etc.) set on the basis of the most common surfactant (sodium dodecyl sulfate, SDS) and discussed the qualitative and quantitative characterization of SWCNT dispersions by UV-Vis absorption spectroscopy. Quantitative aspect about nanotube dispersion was that in particular N-methyl-2-pyrrolidone (NMP) and sodium dodecylbenzene sulfonate (NaDDBS) were found to be effective in dispersing individual tubes.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.4
• /
• pp.630-636
• /
• 2021

Glabridin, a compound of the flavonoid, has shown outstanding skin-whitening and anti-aging properties, but its water insolubility limits its wide application. Therefore, glabridin liposome (GL) has been developed to improve its poor bioavailability, while there are few studies to evaluate its amelioration of UVB- induced photoaging. This study is performed to investigate the amelioration of GL against UVB- induced cutaneous photoaging. The prepared GL has a spheroidal morphology with an average diameter of 200 nm. The GL shows lower cytotoxicity than glabridin, but it has a more effective role in inhibition of melanin. Moreover, the application of GL can effectively relieve UV radiation induced erythema and leathery skin, associated with the down-regulated expression of inflammatory cytokines (TNF-α, IL-6 and IL-10). Taken together, these results demonstrate that GL has potentials as topical therapeutic agents against UVB radiation induced skin damage through inhibiting inflammation.