• Journal of Environmental Impact Assessment
• /
• v.28 no.6
• /
• pp.592-603
• /
• 2019

This study is about the implementation of low energy sewage management technology through effective control of blower which consumes the most energy in sewage treatment. In calculating the amount of oxygen required for microorganisms, unlike the existing method using the operating index in the bioreactor or TMS data in the discharge port, the CODcr and NH₄⁺-N concentration changes in sewage flowing into the sewage treatment plant were detected in advance before entering the bioreactor and the amount of air was controlled based on this. The pre-sensing was found to have a high correlation compared with conventional products. As a result of blower control, it was possible to save about 9.9% energy more than the manual control. Consequently, this study suggested the possibility of blower's real-time control combined with pre-sensing technology. Also, it is expected that the low energy sewage treatment can be applied to sewage treatment facilities dependent on operation by manpower, and it will contribute to the reduction of greenhouse gas emissions.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.1
• /
• pp.30-37
• /
• 2015

BACKGROUND: During the winter, the use of deicers was rapidly increased for reduction of traffic accidents as well as injuries in Korea, whose components are largely comprised of calcium chloride and sodium chloride. Recently, to reduce the adverse effects of chloride-deciers such as pollution of water and soil, and decrease of agricultural productivity, the attention of eco-friendly deciers have been increased. This study aimed to investigate biological effects of magnesium chloride deicer (PC-10) and organic acid deicer (EFD-1) against wheat, barley, and spinach. METHODS AND RESULTS: We examined the effect of two deciers, PC-10 and EFD-1 on the seed germination and growth of wheat, barley and spinach. EFD-1 showed higher suppression of the germination than PC-10 among tested crop seeds. In demage index of the seedlings of the crops, there was no symptoms in spinach such as spotting and color change of leaves. EFD-1 showed much stronger inhibitory effect on the germination of tested crop seeds than PC-10 when crops were exposed continuously to tested deciers in soils. The growth and shoot and root in examined crops was relatively higher in PC-10 treatment than in EFD-1 treatment when compared to the control. The biomass decrease was found in all examined conditions of deciers. PC-10 showed 23-35% reduction of biomass whereas EFD-1 exhibited 39-84% loss in all examined crops at over 2% concentration. CONCLUSION: These results suggest that the effects of deicers used in this study by inputting into soil against growing tested crops cause the reduction of germination of seeds, growth, and biomass compared to the control.

• Korean Journal of Environmental Biology
• /
• v.31 no.4
• /
• pp.419-428
• /
• 2013

The objectives of this research were to determine ecological characteristics and chemical gradients in two different loach populations-Misgurnus anguillicaudatus ($M_a$) and Koreocobitis rotundicaudata ($K_r$). Eight chemical parameters were compared to test the chemical preferences between the two species. The population of Kr occurred more in better water quality, compared to the $M_a$-population. The $M_a$-population co-occurred more with tolerant species (TS) and omnivores, whereas the $K_r$-population co-occurred more with sensitive species (SS) and insectivores. The differences in the tolerance and trophic composition matched well with the result of stream health assessment, based on the multi-metric model of Index of Biological Integrity (IBI). The IBI value in habitat with the $M_a$-population was "19.6" (range: 8~40) indicating a fair condition, and the IBI values of $K_r$-population was 29.4 (range: 12~40) indicating good condition. Similar results were found in physical habitat health analysis (QHEI). Overall, data analysis showed that the $M_a$-population belong to the tolerant species and $K_r$-population belong to sensitive species in the tolerance classification.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.6
• /
• pp.295-306
• /
• 2016

The purpose of this paper is both to analyze research trends and to predict industrial flows using the meta-data from the previous studies on data quality. There have been many attempts to analyze the research trends in various fields till lately. However, analysis of previous studies on data quality has produced poor results because of its vast scope and data. Therefore, in this paper, we used a text mining, social network analysis for time series network analysis to analyze the vast scope and data of data quality collected from a Web of Science index database of papers published in the international data quality-field journals for 10 years. The analysis results are as follows: Decreases in Mathematical & Computational Biology, Chemistry, Health Care Sciences & Services, Biochemistry & Molecular Biology, Biochemistry & Molecular Biology, and Medical Information Science. Increases, on the contrary, in Environmental Sciences, Water Resources, Geology, and Instruments & Instrumentation. In addition, the social network analysis results show that the subjects which have the high centrality are analysis, algorithm, and network, and also, image, model, sensor, and optimization are increasing subjects in the data quality field. Furthermore, the industrial connection analysis result on data quality shows that there is high correlation between technique, industry, health, infrastructure, and customer service. And it predicted that the Environmental Sciences, Biotechnology, and Health Industry will be continuously developed. This paper will be useful for people, not only who are in the data quality industry field, but also the researchers who analyze research patterns and find out the industry connection on data quality.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.87-92
• /
• 2010

As the Concept "how environmental friendly" becomes more and more important in road construction. However, so far there is no estimation method. Environmental friendly concept can be incorporated at the plan level in order to influence decision making, and support policies that affect environment. The overall goal of this study was to develop environmental friendly concept measures for the national highway and to develop a methodology to implement a more environmental friendly concept. The research identified 8 performance measures through a project analysis that could address environmental impact assessment system's ten strategic goals - Topography, Wildlife, hydrology, landuse, air quality, water quality, soil, waste, noise, landscape. The qualitatively and quantitatively evaluation approach was selected as the decision support framework and performance measure were investigated using the AHP(Analytic Hierarchy Process) and pilot corridor for a 10 section and calculate the index values. The methodology was applied to a pilot corridor comprised of a 120km section of national highway in korea. The methodology made it possible to identify the specific performance measures that need improvement to enhance the overall environmental friendly concept. It is fairly intuitive, based on readily available data, and is easy to apply. It provides a powerful tool for government to assess the relative environmental friendly conceptof their transportation corridors now and in the future. It allows for comparisons within a corridor and with other corridors and identifies the improvements needed to enhance the environmental friendly concept.

• Korean Journal of Poultry Science
• /
• v.32 no.4
• /
• pp.269-273
• /
• 2005

The wild ginseng culture by-products(WGCB) was added to the laying hens diets. A total of 420 Lohmann Brown laying hens were alloted to five levels of drinking water containing WGCB 0, 0.4, 0.8 1.6, $3.2\%$with seven replications and fed com-soybean meal based diets contained ME 2,800 kcal/kg, CP $16\%$. Laying Performance, egg quality, egg yolk fatty acid and cholesterol concentration were measured. Egg Production and daily e99 mass were significantly lower(p<0.05) in birds fed the WGCB $3.2\%$ compared with no WGCB group, but showed no significant effect in other treatments. Feed efficiency of birds fed $0.4\%$ WGCB showed the lowest of all treatments(p<0.05). Eggshell thickness was increased(p<0.05) by WGCB supplementation, whereas eggshell breaking strength, haugh unit and yolk color index were not affected. No significant change in yolk fatty acids and cholesterol were observed by the addition of WGCB.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.2
• /
• pp.90-95
• /
• 1984

To improve the physico-mechanical characteristics of heavy clayey paddy soils(Hwadong series) on Diluvial terrace after application of fine sand and briquette ashes, barley and rice were cultivated for 2 years. The influences of sand and briquette ashes on soil properties and on the crops were summarized as follows: 1. Application of the adding materials could not affect the yield of rice but barley yields were increased significantly about 18-19% in the plots of sand 100t/10a(clay 15% adjusted) and in the plots of briquette ashes. 2. The porosity and the content of water stable aggregates were decreased in the plots of sand and briquette ash adding. The chemical properties were slightly decreased in the plots of sands while the contents of av. $SiO_2$: and extr K were increased in the plots of briquette ashes. 3. Soil mechanical properties such as cone penetration resistance, shearing resistance and plastic index etc. were decreased while the friction resistance increased in the plots of sand and briquette ash treatments. Consequently, the adaptability to mechanization was increased. 4. The content of rice roots in subsoils (10-20cm) were increased in the plots of sand and briquette ash treatments.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.4
• /
• pp.437-443
• /
• 2015

Purpose: This study evaluated the optical and physical and characteristics of soft contact lens polymerized with addition of 3-chloropyridine-4-carboxylic acid and 3-fluoropyridine-4-carboxylic acid in the basic hydrogel contact lens material. In particular, the utility of 3-chloropyridine-4-carboxylic acid and 3-fluoropyridine- 4-carboxylic acid as a hydrogel contact lens material was investigated. Methods: In this study, 3-chloropyridine-4-carboxylic acid and 3-fluoropyridine-4-carboxylic acid were used as additives. Also, 2-hydroxyethyl methacrylate, acrylic acid, methyl methacrylate and a cross-linker EGDMA were co-polymerized in the presence of AIBN as an initiator. Results: The physical properties of the produced polymers were measured as followings. The water content of 34.54~37.15%, refractive index of 1.4320~1.4342, tensile strength of 0.2872~0.3608 kgf and contact angle of $57.82{\sim}79.57^{\circ}$, UV-B transmittance of 76.8~82.4% and UV-A transmittance of 84.6~86.6% were obtained respectively. Conclusions: Based on the results of this study, contact lens material containing 3-chloropyridine-4-carboxylic acid and 3-fluoropyridine-4-carboxylic acid is expected to be able to used as a material for high wettability and UV-block hydrogel contact lens.

• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1744-1753
• /
• 2007

The purpose of this study was to provide obese middle school girls with walking and behavior modification program(WBMP) by investigating effects of the exercise on their body composition(BC), physical fitness(PF) and metabolic syndrome(MS). Analysis result of the difference between before and after the exercise(paired and independent t-test) was acquired by measuring BC, PF and MS for 12 weeks(60min/day, three a week). 24 Volunteers were 14 years over ${\geq}223.64kg/m^2$ and 15 years over ${\geq}24.00kg/m^2$. In the body composition, waist circumference(WC), body fat mass(BFM), %fat, arm muscle circumference(AMC), total body water(TBW), physical score(PS) were significant difference between the exercise group(EG) and the control group(CG), also including all factors in PF. The components of metabolic syndrome were significant difference between EG and CG, but HDL-C, systolic & diastolic blood pressure were no difference. The metabolic syndrome factors by separate of waist girth were no difference between EG and CG, but BMI, diastolic blood pressure were significant difference. The prevalence of metabolic syndrome was 4 of 24(16.7%) before intervention, but it dropped from 2 to 1 after intervention in WBMP. The components of metabolic syndrome was distributed a big WC>low HDL-C>high TG>hypertension. The changes of AMC, We, PS, BW, 50m run and BFM effect the factors on BMI(35%), WHR(waist-hip ratio, 69%), HDL-C(42%), fasting blood glucose(65%), HOMA-IR index(34%) and systolic blood pressure(39%) respectively. There were significantly increased in breakfast frequency, walking steps, and meal eating period, but decreased in snacks and eating out in exercise group.

• Korean Journal of Food Science and Technology
• /
• v.38 no.1
• /
• pp.1-4
• /
• 2006

Method of analyzing sodium alginate in foods was developed using high performance liquid chromatography (HPLC). HPLC conditions for sodium alginate were: column, MCI GEL $(8\;mm\;i.d{\times}300\;mm)$; mobile phase, deionized water; detector, refractive index detection (sensitivity = 16). Separation of sodium alginate was achieved within 15 min. Sodium alginate showed good linear relationship at 0.1-2.0% range. Correlation coefficient of calibration curve for sodium alginate exceeded 0.999, and detection limit was 0.005%. Recovery rate of sodium alginate in wheat flour dough was 106.67%. This method was successfully applied to analyses of cereals, saccharides, and ice cream, etc. Sodium alginate was detected in chocolate, noodles, and kelp at 0-44.8% range.