• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.489-495
• /
• 2016

In this study, the Warm-Mix Asphalt was prepared using a modified Sulfur Binder mixed with an additive of a polymer component in sulfur, which is an industrial by-product generated in the crude oil refining process. The dynamic stability and durability characteristics of the prepared Warm-Mix Asphalt was evaluated by the indirect tensile strength, the tensile strength ratio before and after water immersion and freezing-thawing, and the dynamic stability by wheel tracking test. The Warm-Mix Asphalt Mixtures using Modified Sulfur Binder has a tensile strength ratio before and after water immersion of 0.88, which is about 1.13 times that of the Warm-Mix formed modified Asphalt, and the tensile strength ration before and after freezing-thawing is also 0.82, thus, all tensile strength ratios satisfied the KS quality standard value of 0.75 or more. The indirect tensile strength was 1.6MPa which was twice the KS quality standard value of 0.8MPa, and about 1.24 times higher than that of normal heated asphalt 1.29MPa. In addition, the dynamic stability by the wheel tracking test was 14,075 times/mm, which was about 15 times higher than that of normal heated asphalt and about 3 times higher than that of the Warm-Mix formed modified Asphalt, showing excellent resistance to plastic deformation such as fatigue cracks.

• Journal of the Korea Concrete Institute
• /
• v.12 no.1
• /
• pp.113-125
• /
• 2000

The purpose of this study was to examine the durability characteristics of controlled low strength material(flowable fill) with high volume fly ash content. Flowable fill refer to self-compacted, cementitious material used primarily as a backfill in lieu of compacted fill. The two primary advantages of flowable fill over traditional methods are its ease of placement and the elimination of settlement. Therefore, in difficult compaction areas or areas where settlement is a concern, flowable fill should be considered. The fly ash used in this study met the requirements of KS L 5405 and ASTM C 618 for Class F material. The mix proportions used for flowable fill are selected to obtain low-strength materials in the 10 to 15kgf/$\textrm{cm}^2$ range. The optimized flowable fill was consisted of 60kg f/$\textrm{m}^3$ cement content, 280kgf/$\textrm{m}^3$ fly ash content, 1400kgf/$\textrm{m}^3$ sand content, and 320kgf/$\textrm{m}^3$ water content. Subsequently, durability tests including permeability, warm water immersion, repeated wetting & drying, freezing & thawing for high volume fly ash-flowable fill are conducted. The results indicated that flowable fill has acceptable durability characteristics.

• Food Science of Animal Resources
• /
• v.36 no.5
• /
• pp.650-655
• /
• 2016

This study investigated the effects of artificial supercooling followed by still air freezing (SSF) on the qualities of pork loin. The qualities of pork frozen by SSF were compared with the fresh control (CT, stored at 4℃ for 24 h), slow freezing (SAF, still air freezing) and rapid freezing (EIF, ethanol immersion freezing) treatments. Compared with no supercooling phenomena of SAF and EIF, the extent of supercooling obtained by SSF treatment was 1.4℃. Despite that SSF was conducted with the same method with SAF, application of artificial supercooling accelerated the phase transition (traverse from -0.6℃ to -5℃) from 3.07 h (SAF) to 2.23 h (SSF). The observation of a microstructure indicated that the SSF prevented tissue damage caused by ice crystallization and maintained the structural integrity. The estimated quality parameters reflected that SSF exhibited superior meat quality compared with slow freezing (SAF). SSF showed better water-holding capacity (lower thawing loss, cooking loss and expressible moisture) and tenderness than SAF, and these quality parameters of SSF were not significantly different with ultra-fast freezing treatment (EIF). Consequently, the results demonstrated that the generation of supercooling followed by conventional freezing potentially had the advantage of minimizing the quality deterioration caused by the slow freezing of meat.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.1
• /
• pp.23-28
• /
• 2003

The present study was undertaken to investigate the effects of PVP concentration and exposure temperature to vitrification solution on the post-thaw survival, in vitro maturation and development of immature bovine oocytes (germinal vesicle stage). The vitrification solution (VS) consisted of 40% ethylene glycol (EG)+0.5 M sucrose (S)+10% FBS. PVP was added to VS: 0%, 5% or 10%. The cumulus-oocyte complexes (COCs) were diluted in VS as one step, after 2 min the COCs were loaded in straw and vitrified by direct immersion into liquid nitrogen. For thawing, the straws were plunged into $30^{\circ}C$ water bath for 10s. After thawing, the oocytes were diluted in 0.5 M (in DPBS with 10% FBS) sucrose solution for 5 min. The survival rate (FDA-test and trypan blue) of immature bovine oocytes was measured. The survival rate was higher in 5% PVP (91.5%) than in 0% (64.2%) or in 10% PVP (79.7%). The proportion of metaphase II formation was 69.35% in control (no vitrified COCs), 9.3% in 40% EG+0.5 M S+0% PVP and 21.05% in 40% EG+0.5 M S+5% PVP (p<0.05). The effect of room temperature ($25^{\circ}C$ for 10 min) and cold temperature ($4^{\circ}C$ for 10 min) on COCs were determined in this study. After IVF, the cleavage and blastocysts rate of oocytes exposed to room temperature and cold temperature in VS+5% PVP was significantly different (2 cell: 63.20% vs 37.97%, blastocysts: 18.40% vs 2.53%). The cleavage rates of frozen-thawed oocytes were 20.53% with PVP and 22.13% without PVP (p>0.05). Two out of 151 oocytes (1.32%) developed to blastocyst stage after frozen-thawed with 5% PVP (p>0.05). Development of oocytes after frozen-thawing to the 2 cell were not significantly affected with or without PVP following IVF. However, the vitrification of immature bovine oocytes with PVP maintained the ability to develop to the blastocyst stage after IVM-IVF and IVC, while no blastocysts were obtained from oocytes vitrified without PVP. These results suggested that PVP has a protective role for vitrification of immature bovine oocytes as far as survival is concerned, however, the protection was not sufficient enough to support blastocyst formation.