• Title/Summary/Keyword: water distributor

Search Result 37, Processing Time 0.021 seconds

Numerical Study of Liquid Film Flow on Heat Exchanger Tube Arrangement and Configuration of Multi Effect Distillation (증발식 다중효용 담수기에서 열교환기 튜브 배열 및 형상에 따른 액막 유동에 관한 수치해석)

  • Jung, Il-Young;Yun, Sang-Kook;Joo, Hong-Jin;Kwak, Hee-Youl
    • 한국태양에너지학회:학술대회논문집
    • /
    • 2011.11a
    • /
    • pp.68-73
    • /
    • 2011
  • This study was performed numerical analysis in order to analyze liquid film flow of heat exchanger tube arrangement and configuration of evaporative multi effect distillation system using medium-temperature. Simulation was accomplished the two-dimensional calculations using commercial analyses program FLUENT based on the FVM(finite volume method). Fresh water generator of this study used Shell & Tubes heat exchanger with Cu_Ni tube, configuration of tube used bare tube and corrugated tube, and arrangement of tube used in-line array and staggered array. Performance of heat exchanger through the formation of liquid film was compared and analyzed. Liquid film flow occurred that falling on heat exchanger tube wall. Result of simulation showed that liquid film thickness of in-line arrangement was found 0.57mm with bare tube and 0.67mm with corrugated tube, respectively. And liquid film thickness of staggered arrangement was found 0.39mm with bare tubes and 0.62mm with corrugated tubes, respectively. Liquid film thickness of corrugated tube showed thicker than bare tube, but heat transfer rates of corrugated tube showed higher than bare tube. The reason was considered that surface area of corrugated tube was wider than bare tube. And liquid film thickness of staggered arrangement showed thinner than in-line arrangement, so thermal performance of staggered arrangement showed higher than in-line arrangement.

  • PDF

Effect of Particle Size of Granular Nitrofen (TOK G) on the Leaf Burning in Rice Plants (Nitrofen입제(TOK G)의 입도가 수도의 약반형성에 미치는 영향)

  • Park, J.K.;Cho, Y.W.;Kwon, Y.W.
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.22 no.2
    • /
    • pp.121-127
    • /
    • 1977
  • Leaf burning due to nitrofenapplication was characterized as brown color spot appearing on the leaf sheath and blade. The spots predominantly appeared around 5-7 cm high above soil surface regardless of different particle size, formulation, application method, or water level. Magnitude and frequency of burn spots increased somewhat as the granular size gets finer, by higher water level, or in transplanted rice compared to directly sown rice when applied at 7 leaf-stage, but there was no indication of increase in leaf burning due to clinging of floating dust to rice plant. When collections from local distributor's stock of TOK 7G, a granular formulation of nitrofen, were analyzed for particle size composition, 98.9% by weight ranged between 9 to 35 meshes, and only about 0.08% by weight was of particles finer than 100 mesh.

  • PDF

Hydrodynamics and Liquid Flow Characteristics in an Internal Circulation Airlift Reactor using a Single Nozzle (단일노즐을 사용한 내부순환 공기리프트 반응기에서 수력학과 액체의 흐름특성)

  • Kim, Jong-Chul;Jang, Sea-Il;Son, Min-Il;Kim, Tae-Ok
    • Applied Chemistry for Engineering
    • /
    • v.8 no.5
    • /
    • pp.816-821
    • /
    • 1997
  • The hydrodynamics and the liquid flow characteristics were investigated in an internal circulation airlift reactor with a single nozzle as a gas distributor. In an air-water system, the gas holdup in the individual flow zone and the impulse-response curve of tracer were measured at various gas velocities and reactor heights. Experimental results showed that for the higher gas velocity(>about 8 cm/s), the flow behavior of bubbles in the riser was turbulent flow due to strong bubble coalescences and the axial height of dispersion zone of large bubbles having uniform sizes in the downcomer was decreased with increasing gas velocity. And mean gas holdups in the individual flow zone and the reactor were increased with increasing gas velocities and were decreased with increasing heights of the top section of the reactor and it was decreased with increasing the height of the top section and gas velocity. Flow characteristics of liquid in the riser and the downcomer was tend to access to plug flow and the overall flow behavior of liquid was mainly varied with the size of the top section which it was assumed to be perfect mixing zone. In these conditions, liquid circulation velocities were increased with increasing gas velocities and they were higher than those by using other gas distributors.

  • PDF

Gas and Liquid Flow Characteristics in an Internal Circulation Airlift Reactor using a Single Nozzle -Effects of Flow Zone Sizes- (단일노즐을 사용한 내부순환 공기리프트 반응기에서 기체 및 액체의 유동특성 - 유동지역의 크기영향 -)

  • Jang, Sea-Il;Kim, Jong-Chul;Jang, Young-Joon;Son, Min-Il;Kim, Tae-Ok
    • Applied Chemistry for Engineering
    • /
    • v.9 no.6
    • /
    • pp.901-906
    • /
    • 1998
  • Gas and liquid flow characteristics were investigated in an internal circulation airlift reactor using a single nozzle for a gas distributor. In three reactors with different diameters of the downcomer and heights of the riser, the gas holdup in the individual flow zone and the impulseresponse curve of tracer for an air-water system were measured for various gas velocities and reactor heights. Experimental results showed that the flow behavior of bubbles in the riser was the slug flow due to strong coalescences of bubbles and that the bubble flow pattern in the downcomer was the transition bubble flow for the smaller diameter of the downcomer, however, it was the homogeneous bubble flow for the larger one. And mean gas holdups in the individual flow zone and the reactor were greatly increased with decreasing the diameter of the downcomer for the equal ratio of height of the top section to that of the riser. Also, the mixing time was much effected by the height of the top section of reactor and for the equal ratio of height of top section to that of the riser, it was increased with increasing the diameter of the downcomer and the height of the riser. Flow characteristics of liquid were mainly varied with the bubble flow pattern in the downcomer and the size of the top section of reactor. And circulation velocities of liquid in the riser were increased with increasing gas velocities and the size of the top section of reactor, and for the equal ratio of height of top section to that of the riser, they were increased with increasing the diameter of the downcomer and the height of the riser.

  • PDF

Experimental Study of SBLOCA Simulation of Safety-Injection Line Break with Single Train Passive Safety System of SMART-ITL (SMART-ITL 1 계열 피동안전계통을 이용한 안전주입배관 파단 소형냉각재상실사고 모의에 대한 실험적 연구)

  • Ryu, Sung Uk;Bae, Hwang;Ryu, Hyo Bong;Byun, Sun Joon;Kim, Woo Shik;Shin, Yong-Cheol;Yi, Sung-Jae;Park, Hyun-Sik
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.40 no.3
    • /
    • pp.165-172
    • /
    • 2016
  • An experimental study of the thermal-hydraulic characteristics of passive safety systems (PSSs) was conducted using a system-integrated modular advanced reactor-integral test loop (SMART-ITL). The present passive safety injection system for the SMART-ITL consists of one train with the core makeup tank (CMT), the safety injection tank, and the automatic depressurization system. The objective of this study is to investigate the injection effect of the PSS on the small-break loss-of-coolant accident (SBLOCA) scenario for a 0.4 inch line break in the safety-injection system (SIS). The steady-state condition was maintained for 746 seconds before the break. When the major parameters of the target value and test results were compared, most of the thermal-hydraulic parameters agreed closely with each other. The water level of the reactor pressure vessel (RPV) was maintained higher than that of the fuel assembly plate during the transient, for the present CMT and safety injection tank (SIT) flow rate conditions. It can be seen that the capability of an emergency core cooling system is sufficient during the transient with SMART passive SISs.

A Study on Optimal Packing Volume of Media in Swirl Flow Biological Fluidized Bed (선회류 생물학적 유동상의 최적 메디아 충전량에 관한 연구)

  • Choi, Doo-Hyoung;Kim, Hwan-Gi
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.22 no.2
    • /
    • pp.331-340
    • /
    • 2000
  • The existing two-phase biological fluidized bed has some problems such as limit of oxygen transfer and blockade of fluidized distributor. In this study, three-phase swirl flow biological fluidized bed has designed to solve the problems and to investigate its running characteristics. TOC of influent synthetic wastewater was approximately $70mg/{\ell}$. HRT of reactor was 1.6 hours. Mean particle size of sand, as packing media, was 0.397mm and packing volume was varied from $200m{\ell}/{\ell}$ to $600m{\ell}/{\ell}$ by stages in the bed. The amount of biomass and effluent water quality was throughly investigated in the bed. Showing experiment results from the above conditions, it was possible to solve the problems of existing fluidized bed and to keep DO of $3mg/{\ell}$ or more. And it was also TOC removal rate of 91 to 94 %, MLVSS of 2,360 to $3,860mg/{\ell}$, MLVSS per g-media of 8.4 to 17.3 mg/g, F/M ratio of 0.59 to $1.04kg-TOC/kg-MLVSS{\cdot}day$, biofilm thickness of $35{\sim}71{\mu}m$ and sludge productivity of 1.03 to $2.35kg-SS/m^3{\cdot}day$. Optimal conditions in this experimental were as follows.; those were biofilm thickness of approximately $54{\mu}m$. MLVSS per g-media of 13 mg and media packing volume of 350 to $400m{\ell}/{\ell}$ when F/M ratio was low, treatment efficiency was high and sludge productivity was low. Showing the media with optics microscope in this optimal condition, attached microbes such as Epistylis sp. were observed. From SEM photographs, it showed that Coccus adhere to and grow on the media surface.

  • PDF

A Study on Marketing of Cultured Laver Products (양식해태의 유통에 관한 조사 연구)

  • 유충열
    • The Journal of Fisheries Business Administration
    • /
    • v.4 no.1_2
    • /
    • pp.19-57
    • /
    • 1973
  • Laver io one of the most necessary and seasonal items in Korean food from oldtimes. Laver is lagely eaten in dried form, and its supply depends entirely upon culture weeds. The history of laver culture in Korea about sixty or seventy years is older than in Japan. Significance of laver culture is divided into two aspects, one is food supply in the nation, and the other is export to other countries. Houses engaged in laver culture are about foully thousands, and laver production in 1972 is estimated as 1, 3 bitten sheets. (1 sheet is a dried laver of 20 cm sq, in the shape of paper) Especcially meaning of layer production is the concentration of labour input, and systematic management of labour. From around 1920, the method of laver culture was introduced by Japanese Imperialism for mono culture in shallow seas, and mass products of laver is provided to Japan market, DOMESTIC MARKET Fundamental consume function calculates at below, $D_{(68_71)}$=16354 $Y^{0.471}$ $P^{-1.0662}$ where D is total layer demand, Y income variable, P price variable. It means income elasticity is 476. in the whole country, and price elasticity is 1, 07. But generally income elasticity is higher in urban area than in rural area, as shown at 1, 3 in Seoul city. Expence of laver in house expenditure is mutually correlated with another expence, See Table 12 about the relative function. See Table 14 and 16 about the relation between the gathering and the changes of price in auction, wholesale and retail price support system is for two effects, one of which is constraint of the upper price, the other is rise of the lower price. Before the system control, the equation in three year average calculated as below, $Y_{b}$ =18, 907.7455+15435.9364 t (r=0.89) where the origin t=0 is the November and the units are month. Post the system control, $Y_{p}$ =30, 047.9636+1, 631.1721t (r=0.97) therefore, this system has an effect only on the rise of lower price, Average annual margins of laver products at four market levels according to the consumer spent is below. EXPORTING MARKET Japanese demand function of laver products is, Log D=5, 289+1, 108 Log Y-1, 395 Log P (r=0.987) where D is Japanese laver demand, Y income variable, P price variable. according to which income elasticity is 1. 1 and price elasticity is 1.4. Laver production in 1970 tile highest record till then, is estimated as six billion sheets. But the recent improvement of laver culture techniques, the production of seeds and freezing storage of seeds has been stabilized. Futher new culture farms have been developed by means of break- water fences or by floating culture method. These improvements have been backed up with increased demand of laver products. Import quantity and price of Korean laver products are restrained by three organizations, that is producer, distributor and consumer. This relationship calculated by regression equation shows that import is influenced only producer organization, at the sacrifice of consumer profit. For increase to export of laver products, we urgently require to open foreign trade of laver products for Japanese consumer, .and Japan has political responsibility to solve Korean laver structure. But with long run timeseries, as regards Japanese production and import quantity, importing function shows increasing trend as below, 250 million sheets <3, 947.1674+0.005 $L_{g}$ >) 600 million sheets where $L_{q}$ is relative production quantity of laver in Japan. (unit; 100 thousand sheets) Our Export effort should be put on the highly processed products whithin the restraind quote.ote.

  • PDF