• Korean Journal of Soil Science and Fertilizer
• /
• v.51 no.1
• /
• pp.61-70
• /
• 2018

This study was carried out to review and compare crop cultivations upon chemical properties of paddy soil and qualitative characteristics of rice in Sejong-city from a point of view of farming extension to rice farmers and to utilize the result of the study as a basic guideline for precise agricultural practice. The pH in soils of Sejong was about 6.1-6.6 and had no difference with an average pH of paddy soils in Chung-Nam with pH 6.1. However, the average of organic matter, calcium (Ca) and available silicate in Sejong was lower than the average of them in Chung-Nam. The yields of rice were higher in 2010 than in 2011 and 2012, and the protein contents of rice were the highest in 2011 while the lowest water contents of rice in 2011. The protein contents upon regions were the highest in 2011 with 6.1%, and the amylose contents were the highest in Yeondong-myun, Jeoneu-myun, and Yeonseo-myun in 2010 while Kumnam-myun and Jeondong-myun were the highest in 2012. With the increase of precipitation, the protein content level in rice was increased while the amylose content level tended to decrease. Correlations between the chemical properties of paddy soil and the quality of rice and between level of organic matter in soil and amylose contents were negative (r = -0.507), and the correlation between the moisture contents and amylose contents (r = 0.419) and between the water contents and whiteness (r = 0.485) were positive. Because the quantity and quality of rice yield is determined by the soil characteristics, the consultation to farmers for the proactive soil analysis and for the maintenance of stable level of pH, organic matter and available silicate based on historical results of analysis is highly recommended. Also, the analysis on the effect of the weather and the soil characteristics affecting the quality and quantity of rice would be another good way.

• the MEAT Journal
• /
• s.34 winter
• /
• pp.40-47
• /
• 2007

This study was conducted to determine the effect of L. casei KCTC 3109 on physico-chemical characteristics and TBARS values of fermented pork meat. Each pork meat were allotted to two treatments ; Control (0%), T1 (supplemented with L. casei KCTC 3109 10%). The pH tenderness and water holding capacity (WHC) of T1 were higher than those of control (p<0.05), cooking loss of control was higher than T1. Water content, crude fat and ash were not significantly different, crude protein was higher in T1 compared with control (p<0.05). L*, a* and b* values of control were higher than those of T1 (p<0.05). TBARS values was higher in T1 (0.02 MA mg/1,000 g) than control (0.19 MA mg/1,000 g) (p<0.05).

• Food Science of Animal Resources
• /
• v.26 no.2
• /
• pp.218-222
• /
• 2006

This study was conducted to determine the effect of L. casei KCTC 3109 on physico-chemical characteristics and TBARS values of fermented pork meat. Each pork meat were allotted to two treatments ; Control (0%), $T_1$ (supplemented with L. casei KCTC 3109 10%). The pH tenderness and water holding capacity (WHC) of $T_1$ were higher than those of control (p<0.05), cooking loss of control was higher than $T_1$. Water content, crude Int and ash were not significantly different crude protein was higher in $T_1$ compared with control (p<0.05). $L^*,\;a^*$ and $b^*$ values of control were higher than those of $T_1$ (p<0.05). TBARS values was higher in $T_1$(0.02 MA mg/1,000 g) than control (0.19 MA mg/1,000g) (P<0.05).

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.3
• /
• pp.71-76
• /
• 2012

Since sediment in a stable state is disturbed during the process from sediment in a natural state to dredged soil, the turbidity of water is not good. When the dredged soil settles again, the volume change in the sediment occurs. Coagulant and flocculant are added for turbidity mitigation of the water and faster settling process of suspended solid, and the amount of the substances affects the characteristics of the dredged soil. This study is to investigate the characteristics of the dredged soil depending on the amount of three chemical products added to the wet dredged soil and the dry dredged soil through measuring the suspended solids (SS), volume change and sedimentation velocity. The experimental measurements show that the SS decreased, the volume change rate increased, and the sedimentation velocity increased, as the chemical amount increased. In addition, it was found that the dry dredged soil reacted even with little quantity of the chemicals because derelict and microorganism are removed due to the drying process at $100{\pm}5^{\circ}C$.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.1
• /
• pp.43-48
• /
• 2000

Drug delivery system(DDS) applied to various fields, such as medicine, cosmetics, agriculture and necessities of life. Among these application fields, DDS is often used as the method of drug dosage into the epidermic skin. We investigated characters of transdermal therapeutic system(TTS) and the skin permeability of that with applying DDS. Chitosan was selected as material of TTS. We investigated the permeation of chitosan ointment containing drug in rat skin using horizontal membrane cell model. Permeation properties of materials were investigated for water-soluble drug such as riboflavin in vitro. We used glycerin, PEG 600 and oleic acid as enhancers. Since dermis has more content water(hydration) than the stratum corneum, skin permeation rate at steady state was highly influenced when glycerin was used in water-soluble drug. The permeation rate of content enhancer and drug was found to be faster than that of content water-soluble drug only. These results showed that skin permeation rate of drug across the composite was manly dependent on the property of ointment base and drug. Proper selection of the polymeric materials which resemble and enhance properties of the delivering drug was found to be important in controlling the skin permeation rate.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.5
• /
• pp.398-403
• /
• 1987

A general theory of polymer adsorption at a semi-permeable oil-water interface of the biphasic solution is presented. The configurational factor of the solution in the presence of the semi-open boundary at the interface is evaluated by the quasicrystalline lattice model. The present theory gives the feature of the bulk concentration equilibria between oil-water subsystems and the surface excesses of ${\Gamma}^{\alpha}$ and ${\Gamma}^\{beta}$ of the polymer segments as a function of the degree of polymerization $\gamma$, the Flory-Huggins parameter in $\beta$-phase $x_{\rho}^{{\beta}_{\rho}}$, the differential adsorption energy parameter in $\beta$-phase $x_{\sigma}^{{\beta}_{\rho}}$, the differential interaction energy parameter ${\Delta}x_{\rho}$ and the bulk concentration of the polymer in ${\beta}-phase ${\varphi}_2^{{\beta(*)}_2}$. From our numerical results, the characteristics of ${\Gamma}^{\alpha}$ are shown to be significantly different from those of ${\Gamma}^{\beta}$ in the case of high polymers, and this would be the most apparent feature of the adsorption behavior of the polymer at a semi-permeable oil-water interface, which is sensitively dependent on ${\Delta}x_{\rho}$ and r.

• Advances in nano research
• /
• v.12 no.5
• /
• pp.489-499
• /
• 2022

Nanofluids have recently triggered a substantial scientific interest as cooling media. However, their stability is challenging for successful engagement in industrial applications. Different factors, including temperature, nanoparticles and base fluids characteristics, pH, ultrasonic power and frequency, agitation time, and surfactant type and concentration, determine the nanofluid stability regime. Indeed, it is often too complicated and even impossible to accurately find the conditions resulting in a stabilized nanofluid. Furthermore, there are no empirical, semi-empirical, and even intelligent scenarios for anticipating the stability of nanofluids. Therefore, this study introduces a straightforward and reliable intelligent classifier for discriminating among the stability regimes of alumina-water nanofluids based on the Zeta potential margins. In this regard, various intelligent classifiers (i.e., deep learning and multilayer perceptron neural network, decision tree, GoogleNet, and multi-output least squares support vector regression) have been designed, and their classification accuracy was compared. This comparison approved that the multilayer perceptron neural network (MLPNN) with the SoftMax activation function trained by the Bayesian regularization algorithm is the best classifier for the considered task. This intelligent classifier accurately detects the stability regimes of more than 90% of 345 different nanofluid samples. The overall classification accuracy and misclassification percent of 90.1% and 9.9% have been achieved by this model. This research is the first try toward anticipting the stability of water-alumin nanofluids from some easily measured independent variables.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.2
• /
• pp.105-112
• /
• 2008

The surface and bottom water were sampling in ten stations of the coastal area of Chagwi-Do, Jeju Island, which was repeated 6 times in several different months(September, November, 2004 and March, May, August, and November 2005) in order to examine the physico-chemical characteristics of water. The temperature varied by approximately $16^{\circ}C$, ranging somewhere between 1$12.2^{\circ}C$ and $28.9^{\circ}C$. Specifically, the temperature of bottom water was $13^{\circ}C$, implying the emergence of low temperature water. The salinity ranged from 30.2 to 34.9%o, and the lowest salinity in August may be attributable to the effect of land-based water. N/P ratio, the growth factor of phytoplankton, ranged from 5 to 76, which varied depending on the season and station. The ratio, however, was over 22 on the average, suggesting that phosphate phosphorus is an factor that restricts the growth of phytoplankton. TOC in the concentration of organic carbon ranged between $92.5{\mu}M$ and $438.3{\mu}M$, and the mean was $217{\mu}M$. DOC ranged from $82.5{\mu}M$ to $299.2{\mu}M$, and the mean was $130{\mu}M$. The ratio of DOC/POC was 60% with abundant dissolved organic carbon.

• Journal of computational fluids engineering
• /
• v.22 no.1
• /
• pp.1-7
• /
• 2017

The mixing of water and chemicals is an important process in the water purification plant. In this paper, we compare PDM(pump diffusion mixer) and hydraulic mixer at the basin in the mixing process. The proper flow rates are predicted and compared in both mixers using CFD technique. As a result, the flow rate of purifier chemical liquid should be 5% of that of water for the optimal performance of mixing process. The characteristics of the two mixing methods are compared with each other for strong and weak points on the operation of the purification system, discussed in the view point of CFD simulations.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1203-1205
• /
• 1993

The use of preformed polymers and their cross-linking have been attempted in order to improve the intrinsic fragility of monolayers and Langmuir-Blodgett(LB) films. The evaluation of the characteristics of LB multi-layer by using AT-cut quartz crystal have been also attempted. From this study, it reveals that the polyether pendants of 2C18VE3 lie at the air-water interface at low surface pressures and are forced down into the subphase when the monolayers are compressed. This caracteristic behavoir of the pendant polyethers is much clear on aqueous PAA and also observed on saturated aqueous NaCl. And the characteristics of LB multi-layers could be evaluated by using AT-cut quartz crystal in situ.