• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.1
• /
• pp.212-225
• /
• 2015

In order to preserve the quality of fresh water in the artificial lake after the reclamation of an intertidal flat at the mouth of a river, we suggest two novel methods of water purification by using tidal potential energy and an enclosed permeable embankment called an utsuro (Akai et al., 1990) in the reclaimed region. One method uses an inflatable bag on the seabed within an utsuro, while the other uses a moored floating barge out of a dyke. Each case employs a subsea pipe to allow flow between the inside and outside of the utsuro. The change in water level in the utsuro, which is pushed through the pipe by the potential energy outside, caused circulation in the artificial lake. In this paper, we analyzed the inflatable bag and floating barge motion as well as the pipe flow characteristics and drafts as given by a harmonic sea level, and compared the theoretical value with an experimental value with a simple small model basin. The numerical calculation based on theory showed good agreement with experimental values.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.1-9
• /
• 2019

In the recent marine sector, the development and standardization regarding S-100, which is the universal hydrographical data model standard for development of marine space information, was progressed, and for the effectiveness of marine chart production work and the multi-purpose use of water level data in S-100, S-102(Bathymetric Surface grid) standard development and various studies of BAG formats combined with water level and uncertainty, property information is being progressed. Since the water level information that is important in the operation of the ship is provided based on S-102, the calibration method of the location information when producing S-102 is an important factor in deciding the water level. In this study, the hydrographical surveying was conducted by piloting the standardized method for the production of S-102 in Korea, and have compared the accuracy of water level information according to the GNSS post treatment calibration method. As a result of comparing the water level in 2 places in the rocky terrain of the study area, the northern water level of Namu-do was shown as DL 0.79~0.83m, the eastern water level of Daeho-do was DL 12.63~12.91m, and the horizontal position errors of the intermittent sunshine water level were confirmed to be within 1m. As a result, the intermittent sunshine water level according to the location calibration method when producing the BAG was confirmed that it was in the available range for a ship's safe voyage. However, the accuracy verification for the location of the ship when conducting hydrographical surveying was judged that there is a need for a various additional study about regional characteristics and environment factor.

• Explosives and Blasting
• /
• v.36 no.3
• /
• pp.29-38
• /
• 2018

With the recent industrial developments and economic development nationally, there has been a rapidly increasing demand for the use of underground space as locations for establishing social infrastructure and various convenience facilities. In this study, a mist-control system was developed to reduce the generation of dust in underground blasting. To enhance the dust-reduction effect, a guiding device was developed which is capable of adjusting the direction of the spray toward's the blasting face of mine or tunnel. A numerical analysis was performed by using the AUTODYN software, and results were compared with those published in basic experiments. To verify the mist-diffusion effect according to the position of explosives in a water bag, numerical analyses were conducted for the following cases: Explosives were set in the middle, and in the bottom of the water bag. The optimum condition was external detonation and center charge. The mist particle size from the result was suitable for the reduction of dust after blasting in underground mine and tunnel.

• Journal of Korean Society of societal Security
• /
• v.3 no.2
• /
• pp.33-39
• /
• 2010

This study is to reduce the rate of drowning accident by using of buoyancy bag. People are exposed to the high risk of drowning accident when they have water leisure activities due to the lack of safety mind-set and shortage of safety products. In case of drowning accident, the rescue action is normally depending on the other people's assistance. Therefore, rescue activities which relyn the people doesn't improve the ratio of survival in the drowning accidents. The submarine specialists should use the buoyancy products to rescue the people in the drowning accident. The citizen can carry portable buoyancy product in the automobile as well as by hands anywhere and anytime. It will be effective rescue tool to save his/her life in the emergency. In addition, it will contribute to rescue other's life because it can be used immediately. There are 3 positive characteristics on the buoyancy bag. First, it is convenience. Documents and other stuffs can be kept in the bag. Second is safety. The material of buoyancy is placed in the inner of the bag. It is possible to float the person whose weight is 90 kg. Lastly, it is durability. It can be used long-term because the outer of the bag is made of anti-water material and anti-water zipper. As a result of performance analysis, it is evident that the buoyancy bag can be used to rescue the people in the drowning accident as a indirect rescue tool compared with the current other rescue products. It is recommended that the design of outer box and performance of buoyancy are required to be improved in order to contribute more to rescue people in the accident.

• Journal of Power System Engineering
• /
• v.12 no.3
• /
• pp.55-59
• /
• 2008

In this paper, we have investigated on collection efficiency of fine particle of glass fiber-filter bag according to the surface treatment. The solution consisted of polytetrafluoroethylene(teflon), graphite powder, silicon resin and water was used as a basic surface treatment agent. Tensile strength of glass filter-bag increased with up to 3hrs and then decreased with surface treatment time. Tensile strength and initial modulus of the glass fiber-filter bag treated by iodine after basic surface treatment for 3hrs were lower than those of basic surface treatment for 3hrs, however collection efficiency and fracture strain were higher than those of basic surface treatment for 3hrs. Glass fiber-filter bag with lower initial modulus and more strain will be extend the durable period and the one treated by iodine after basic surface treatment 3or 3hrs is expected high collection efficiency of fine particle. This method makes it possible to manufacture glass fiber-filter bag of the optimum condition.

• Journal of Bio-Environment Control
• /
• v.15 no.4
• /
• pp.327-334
• /
• 2006

In tomato perlite bag culture, the available water content was analyzed for several sorts of perlite so that the irrigation safety was investigated and thus the irrigation strategy controlled by time clock was established. The reduction trends of water content in perlite bags were monitored for tomatoes, of which fruits were harvested until the fifth cluster. The amount of daily reduction of water in the bag was on the decrease as the total water in the bag was decreased. In terms of time interval from when the water content based on weight was reduced more than 50g to when it was dropped again, the longest time interval in a day was retarded gradually. It means plant activity was recovered later than the previous day. The available water content in perlite bag of 40 liters was about 30% which was 12 kg in weight, which satisfied daily water demand of 6 tomato plants. The appropriate time irrigated by time clock was recommended for the case that it was irrigated 5 or 10 times a day with the daily integrated solar radiation of 601 or $1,519W/m^2$.

• Culinary science and hospitality research
• /
• v.13 no.2
• /
• pp.216-222
• /
• 2007

Sometimes the problem occurs that a paper knob and a thread attached to a tea bag fall into tea water in pouring tea water into a conventional cup to extract bag type tea. A new cup was developed to solve that problem, which was formed with a thread groove(dia. ; about $1.5{\sim}2\;mm$, hight ; about $4{\sim}5\;mm$) in the upper end of the cup. As a result, the new cup with a thread groove is expected that a paper knob with a thread does not fall into tea water. In addition, the size of a paper knob and the length of a thread may be reduced 70%, respectively.

• Journal of Hydrospace Technology
• /
• v.1 no.1
• /
• pp.14-28
• /
• 1995

The hydrodynamic problem when the pressurized bag submerges partially into water and oscillates was formulated by Lee(1992), and the solution method was given, In his formulation, however, the compressilbility of air was neglected and the pressure inside the bag was assumed to be constant. In this paper, the formulation was done including the air compressibility and the wall to block fling around phenomenon. The compression process was assumed to be a isothermal process for a static problem, isentropic process for a dynamic problem. And the stability was analyzed for the static problem. Through the various numerical calculations, the forces and the shape of the bag were compared with those of a rigid body case, constant pressure case, and variable pressure case.

• Journal of Distribution Science
• /
• v.17 no.7
• /
• pp.39-44
• /
• 2019

Purpose - This research was to help distribution of Go Bags (Survival Bag or Disaster Supplies Kit), which are useful for disaster preparedness, by surveying precomposed Go Bag items in internet shopping malls. Research design, data, and methodology - We checked 15 items including food, water, first aid kit, radio, flashlight or candles, battery, lighter or matches, whistle, blanket, towel, toilet paper, personal sanitations, raincoat, can opener, disaster manual in Go Bags based on the recommendations by the Ministry of the Interior and Safety. The number of items and price, domestic product, accreditation were compared using a Chi-square test. The Pearson's R was also used to summarize the strength of the linear relationship between the number of items and price, sub-items. Results - Mean of the sub-items was 21, and mean of the items was 8. There was a statistically significant difference between the number of items size and the price level (p=.014). There was also a statistically significant difference between the number of items and sub-items (p<.001), and correlation coefficient was a positive linear relationship of .467. Conclusions - Only eight were sold in the internet shopping malls as a precomposed Go Bag items. Even the approved Go Bags had no difference in the number of items. Higher prices had a relatively greater number of items, and it had a positive correlation between the size of sub-items and items.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.413-419
• /
• 2009

The appropriate dripper position in perlite bag was investigated for tomato production. Drippers were laid at 5(F5), 15cm (F15) away from the stem base or 5cm at first and then moved to 15cm later (M5-15). Roots were developed more near the stem base in F5, while less in F15. Roots were distributed evenly in M5-15. In vertical distribution of water in perlite bag, water content was higher as it went deeper with the variation by dripper positions. Yield was high in F15 and low in F5. In conclusion the position of dripper is the best at 15cm from the stem base in perlite bag culture in view of root distribution and yield.