• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1800-1802
• /
• 2003

This paper describes a study on gas dissolved distribution in oil for simulated transformer thermal faults. Experimental chamber was setup for simulation of transformer thermal faults or discharge in oil with or without insulation paper. The experimental results showed that dissolved gases in oil excluding the paper did not evolved upto $150^{\circ}C$. Hereafter the planned gas dissolved analysis will be continuously carried out for transformer fault conditions with or without insulation paper related to water absorption, arc and partial discharge.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.112-119
• /
• 2015

The pulp mold attract the increasing concern as recyclable, biodegradable, and eco-friendly packaging materials. In order to broaden the applicability of the pulp mold as substitutes of the expanded styrofoam, the properties of various raw materials for the pulp mold were evaluated and the way for improving water resistance properties of the pulp mold were also tested by applying some additives. The higher value in the fines contents and in the water retention value were shown for the TMP (thermomechanical pulp), which resulted in the bulkier pulp mold with the higher moisture absorption property. In case of water resistance properties, the pulp mold made of white ledger stock showed the higher value in water contact angle and very slow water absorption rate. The addition of oil palm EFB fiber showed the improvement in the water resistance of the pulp mold made of UBKP. The effects of various additives on the improvement in the water resistance properties of the pulp mold were tested by using AKD, PVAm, epoxy resin. The application of AKD leaded to the higher increase in the water resistance. The results in this study showed the effects of AKD for the pulp mold could be improved and optimized by the application with fixing agent and by the ageing treatment after production.

• 한국환경과학회지
• /
• 제22권2호
• /
• pp.243-249
• /
• 2013

Fibers of microbial polyesters, poly(3-hydroxy butyrate) (PHB) and poly(3-hydroxy butyrate-co-3-hydroxy valerate) (HB-co-HV) were prepared by electrospinning method. The obtained fibers were evaluated by differential scanning calorimetry, scanning electron microscopy, and oil absorption. The formation of fibers was strongly dependent on a concentration of solution. At a low concentration, the fibers contained beads which is from aggregation of polymer due to short evaporation time. The fine fibers with $2-5{\mu}m$ diameter were obtained at 20 wt% concentration. The contact angle measurement showed that the fiber had higher water contact angle than the film due to the lotus-like effect. Oil absorbency showed that the fiber had higher than the film. Specially, the HB-co-HV fiber which was spinned from 20 wt% absorbed 65% oil which is much higher than that of a normal polypropylene-based oil paper.

• Journal of the Korean Wood Science and Technology
• /
• 제49권6호
• /
• pp.602-615
• /
• 2021

Red jabon wood is a potential fast-growing species for veneer, furniture, and many other wood products, but its durability is very low. The purpose of this study was to investigate the effects of castor bean oil and heating on boron leaching, dimensional stability, and resistance to decay fungi in treated jabon wood. Red jabon wood was preserved with boron solutions containing 5% boron (boric acid, borax, or borax-boric acid). Following that, castor bean oil impregnation and heating were used as posttreatments. Furthermore, all the wood samples were tested in terms of leaching, dimensional stability, and resistance against Schizophyllum commune and Fomitopsis palustris fungi. This study discovered that boron compounds, castor bean oil, and heating treatments influenced the leaching, dimensional stability, and resistance of red jabon wood to decay fungi. The double impregnation of boric acid or borax and castor bean oil, followed by heating at 160℃, significantly reduced water absorption and leaching while increasing the dimensional stability and resistance of red jabon wood against the two tested decay fungi.

• 한국표면공학회지
• /
• 제53권6호
• /
• pp.300-305
• /
• 2020

Corrosion of reinforcement steel rebar is a serious problem in a wide range of concrete application for buildings and infrastructures. Hydrophobizing surface treatments, such as self-assembled monolayer coating, edible oil-impregnation and silicone oil-impregnation were applied to solidified concrete. The hydrophobizing of concrete significantly reduces an absorption and transportation of water toward a steel rebar in concrete, so that the corrosion resistance of the steel rebar. In particular, the silicone oil-impregnation not only forms the hydrophobic monolayer on the concrete but also fills the inter-connected pores of concrete, thus the corrosion of steel rebar is significantly inhibited compared to the self-assembled monolayer coating and edible oil-impregnation. Therefore, the silicone oil-impregnation can be a promising candidate for preventing corrosion of steel rebar in concrete for durable performance and safety.

• 대한기계학회논문집B
• /
• 제36권9호
• /
• pp.895-900
• /
• 2012

본 논문에서는 암모니아/물 흡수식 시스템의 흡수성능 촉진에 대한 나노액적의 영향을 파악하고 흡수성능과 분산안정성의 상관관계를 규명함으로써 흡수식 시스템에 대한 이성분 나노에멀전유체의 적용가능성을 제시하고자 한다. 이성분 나노에멀전 유체는 암모니아/물 용액을 모유체로 하며, N-decane 오일을 모유체에 분산시키기 위하여 $C_{12}E_4$와 Tween20을 첨가제로 사용하였다. 이성분 나노에멀전유체의 안정적인 분산을 위하여 교반과정과 초음파 처리과정을 거쳤으며, 이렇게 분산된 유체는 입도측정과 틴들현상 분석을 통해 분산안정성 평가를 수행하였다. 그 결과, 이성분 나노에멀전 유체의 흡수성능 및 열전달 성능에 대한 분산안정성의 영향 및 흡수식 시스템으로의 적용가능성을 확인하였다.

• 분석과학
• /
• 제16권5호
• /
• pp.399-406
• /
• 2003

본 연구는 수소화물 발생장치가 부착된 원자흡광 광도계 (HG-AAS)를 이용하여 비교적 고농도의 Se을 함유하고 있는 석유정제 폐수의 Se 분석을 위하여 적합한 분석조건을 선정하고자 수행되었다. Se(VI)의 Se(IV)로의 환원 실험에서 폐수량 10 mL, 염산 주입량 10 mL, 가열시간 30분이 최적 환원조건으로 결정되었다. 폐수의 조성성분과 유기물의 농도가 높은 경우에는 Se 회수율이 감소하였다. 따라서 3가지 산분해법 ($HNO_3/HClO_4$ 분해, $KMnO_4$ 분해 및 초단파 산분해)에 의한 유기물, 석유화합물 분해 및 유기성 Se(org.), Se(IV) 산화에 따른 Se 회수율을 검토하였다. 실험결과 산분해전 약 50~80%이었던 Se 회수율은 모든 산분해에서 90%이상이었으며 특히, 초단파 산분해에 의한 Se 회수율이 가장 높은 것으로 나타났다. 그러므로 HG-AAS를 이용한 석유정제 폐수의 Se 분석시에는 초단파 산분해후 염산 처리를 하는 전처리 과정이 가장 적합한 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제49권5호
• /
• pp.471-481
• /
• 2021

This study investigated the hygroscopicity and UV deterioration characteristics of 3 domestic and 4 imported woods using natural oil, stain, and varnish paints. In terms of hygroscopicity, it was found that the hygroscopicity of the painted wood was lower than that of the unpainted wood, and that as the number of coatings increased, the hygroscopicity decreased. In terms of anti-absorption, oil-based chemical paints showed higher resistance than water-based paints, and natural oils showed results comparable to oil-based paints. As for the UV deterioration, the amount of color change of the painted wood was lower than that of the unpainted wood, and there was no significant difference according to the number of times of painting. The amount of color change was found to be low in oil-based paints and hardwoods. Through this study, we confirmed effective moisture blocking and small color changes during painting using paints, and it is believed that wood can be protected from internal and external defects through selective and efficient painting based on data for excellent painting performance.

• Journal of Pharmaceutical Investigation
• /
• 제30권4호
• /
• pp.259-266
• /
• 2000

Vitamin A palmitate, an oily drug which has low chemical stability and is poorly absorbed in the intestine, was formulated into a novel powdered dosage form. This is designated as a redispersible dry emulsion by freeze-drying technique. Before preparing a dry emulsion, vitamin A palmitate oil in solid in water (O/S/W) emulsion with soybean oil and coconut oil using Aerosil 200 as an emulsion stabilizer and polyoxyethylene-polyoxypropylene-blockcopolymer (Pluronic F68) as a surfactant was prepared. The resultants of the stability tests indicated that vitamin A palmitate O/S/W emulsion was improved on increasing the oil content of the formulation. The resultant dry emulsion particles have a good stabilities and free flow properties and readily released the oily droplets to form stable emulsions on rehydration. The drug releasing property from the resultant dry emulsion particles was dependent on factors such as amount of oily carrier(soybean oil) and surfactant(Pluronic F68) formulated. Above 80% of vitamin A palmitate content was released from the dry emulsion for 1 hour. It was deduced that vitamin A palmitate dry emulsion was definitely suitable for oral administration, since small droplets of vitamine A palmitate from the dry emulsion may alter the drug absorption profile resulting in bioavailability enhancement.

• 한국식품영양학회지
• /
• 제2권1호
• /
• pp.18-26
• /
• 1989

The objective of this study was to improved the limited functional characteristics of mungbean whole globulin. The mungbean whole globulin was acylated with succinic and acetic anhydride, and the functional properties of acylated protein were investigated, The results obtained ware as follows. 1. The UV-absorption spectra of acylated whole globulins with that of the succinylated 74% whole globulin as large blue shift of the absorption maximum and minimum wavelength from 275 nm to 269 nm, respectively. 2. The mobility of acylated whole globulin were increased on PAGE pattern, and degree of mobility was particularly remarkable in case of succinylation, 3. The water absorption capacity of whole globulin was increased by acylation. The most increased rate of whole globulin was 174,02% from succinylated 74%. The oil absorption capacity of whole globulin was increased by acylation The most increased rate of whole globulin was 165.41% from acetylated 81.77%. 4. The bulk density of whole globulin was decreased by acylation. and the greater the extent of acylation, the smaller the bulk density. 5. The foaming capacity and stability of whole globulin was increased by acylation, and remarkably high in 74% succinylated whole globulin. In contrast, however, the foaming capacity and stability of native and acylated whole globulin were decreased by heat treatment.