• 한국환경과학회지
• /
• 제16권3호
• /
• pp.347-355
• /
• 2007

In this paper, estimation of the compressive strength of the concrete incorporating blast furnace slag subjected to high temperature was discussed. Ordinary Portland cement and blast furnace slag cement (BSC;30% of blast furnace slag) were used, respectively. Water to binder ratio ranging from 30% to 60% and curing temperature ranging from $20^{\circ}C{\sim}65^{\circ}C$ were also chosen for the experimental parameters, respectively. At the high temperature, BSC had higher strength development at early age than OPC concrete and it kept its high strength development at later age due to accelerated latent hydration reaction subjected to high temperature. For the strength estimation, the Logistic model based on maturity equation and the Carino model based on equivalent age were applied to verify the availability of estimation model. It was found that fair agreements between calculated values and measured values were obtained evaluating compressive strength with logistic curve. The application of logistic model at high temperature had remarkable deviations in the same maturity. Whereas, the application of Carino model showed good agreements between calculated values and measured ones regardless of type of cement and W/B. However, some correction factors should be considered to enhance the accuracy of strength estimation of concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.68-71
• /
• 2013

Reactive Powder Concrete (RPC) is an ultra high strength and high ductility cement-based composite material and has shown some promise as a new generation concrete in construction field. It is characterized by a silica fume-cement mixture with very low water-binder (w/b) ratio and very dense microstructure, which is formed using various powders such as cement, silica fume and very fine quartz sand (0.15~0.4mm) instead of ordinary coarse aggregate. However, the unit weight of cement in RPC is as high as 900~1,000 kg/㎥ due to the use of very fine sand instead of coarse aggregate, and a large volume of relatively expensive silica fume as a high reactivity pozzolan is also used, which is not produced in Korea and thus must be imported. Since the density of RPC has a heavy weight at 2.5~3.0 g/㎤. In this study, the modified RPC was made by the combination of ternary pozzolanic materials such as blast furnace slag and fly ash, silica fume in order to economically and practically feasible for Korea's situation. The fire resistance and structural behavior of the modified RPC exposed to high temperature were investigated.

• Computers and Concrete
• /
• 제13권4호
• /
• pp.531-545
• /
• 2014

The purpose of this paper is to develop a prediction model for the compressive strength of waste LCD glass applied in concrete by analyzing a series of laboratory test results, which were obtained in our previous study. The hyperbolic function was used to perform the nonlinear-multivariate regression analysis of the compressive strength prediction model with the following parameters: water-binder ratio w/b, curing age t, and waste glass content G. According to the relative regression analysis, the compressive strength prediction model is developed. The calculated results are in accord with the laboratory measured data, which are the concrete compressive strengths of different mix proportions. In addition, a coefficient of determination $R^2$ value between 0.93 and 0.96 and a mean absolute percentage error MAPE between 5.4% and 8.4% were obtained by regression analysis using the predicted compressive analysis value, and the test results are also excellent. Therefore, the predicted results for compressive strength are highly accurate for waste LCD glass applied in concrete. Additionally, this predicted model exhibits a good predictive capacity when employed to calculate the compressive strength of washed glass sand concrete.

• Computers and Concrete
• /
• 제29권 5호
• /
• pp.347-360
• /
• 2022

Fiber-reinforced cementitious composites (FRCC) have emerged as a response to the calls for strong, ductile and sustainable concrete mixes. FRCC has shown outstanding mechanical properties and ductility where special fibres are used in the mixes to give it the strength and the ability to exhibit strain hardening. With the possibility of designing the FRCC mixes to include sustainable constituents and by-products materials such as fly ash, FRCC started to emerge as a green alternative as well. To be able to design mixes that achieve these conflicting properties in concrete, there is a need to understand the composition effect on FRCC and optimize these compositions. Therefore, this paper aims to investigate the influence of FRCC compositions on the properties of fresh and hardened of FRCC and then to optimize these mix compositions using factorial design approach. Three factors, water-to-binder ratio (w/b), mineral admixtures (total of fly ash and metakaolin by cement content (MAR)), and metakaolin content (MK), were investigated to determine their effects on the properties of fresh and hardened FRCC. The results show the importance of combining both FA and MK in obtaining a satisfactory fresh and mechanical properties of FRCC. Models were suggested to elucidate the role of the studied factors and a method for optimization was proposed.

• 한국건축시공학회지
• /
• 제9권5호
• /
• pp.119-125
• /
• 2009

본 연구에서는 실무에서 주로 사용되고 있는 FA, 35 및 CKD 치환률에 따른 콘크리트의 기초적 물성 및 건조수축에 미치는 영향을 분석하고 이를 토대로 건조수축 해석을 실시하여 혼화재가 콘크리트의 건조수축에 미치는 영향을 정량적으로 평가하고자 한다. 실험변수로서 혼화재 치환률은 $0{\sim}20%$ 수준으로 결정하였고, W/B는 $40{\sim}50%$의 수준으로 결정하였다. 건조수축해석을 위해 지수함수모델을 적용하였다. 연구결과에 따르면, 혼화재 치환율이 증가함에 따라 유동성 및 공기량이 감소하였으며 초기압축 강도가 저하됨을 확인 하였다. 건조수축 특성으로 혼화재 치환률이 증가함에 따라 건조수축은 증가하는 경향을 보였으며, 건조수축 해석결과 지수함수 모델이 측정치를 양호하게 추정함을 알 수 있었고, 혼화재의 영향을 고려할 필요성이 제기되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권3호
• /
• pp.39-47
• /
• 2015

본 연구는 MgO를 0~16% 사용한 알칼리 활성화 슬래그 시멘트 (AASC)의 강도와 건조수축 특성에 관안 연구이다. 고로슬래그 미분말 (GGBFS)는 KOH를 활성화제로 사용하였고, 활성화제의 농도는 2M과 4M이다. MgO는 GGBFS의 중량에 대해 치환하였고 물-결합재 비 (w/b)는 0.5이다. 실험결과, 높은 MgO 치환율은 높은 수화반응으로 모든 재령에서 높은 압축강도를 나타내었다. 압축강도와 초음파속도 (UPV)는 MgO의 양이 증가함에 따라 증가되었다. AASC의 건조수축은 MgO의 양이 증가함에 따라 감소하였다. SEM 결과를 통해 높은 양의 MgO 시험체는 치밀한 반응 생성물질이 만들어 진 것을 확인할 수 있다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권5호
• /
• pp.34-40
• /
• 2014

HPFRCC는 물-결합재비 (W/B)가 20%로 상당히 낮고 굵은 골재를 사용하지 않으며, 고분말 혼화재료를 혼입하기 때문에 자기수축이 상당히 크게 발생하여 구조물 적용 시 균열저감대책이 필요하다. 따라서 이 연구에서는 HPFRCC의 수축을 효율적으로 저감시키기 위한 방법으로 수축저감제와 팽창재의 사용을 검토하기 위하여 이들의 단독 또는 병행 혼입률에 따른 역학적 특성과 구속 수축특성을 평가하였다. 구속수축 실험 중에서 링-테스트 (Ring-test)를 통하여 HPFRCC에 사용되는 시멘트에 대하여 중량비로 수축저감제 1%와 팽창재를 7.5%를 병행 사용하였을 경우 압축강도와 인장강도가 크게 저하되지 않으면서도 수축을 가장 효율적으로 저감시킬 수 있는 최적 배합임을 도출하였고 수정된 건조수축 균열실험을 통하여 이를 검증하였다.

• Computers and Concrete
• /
• 제6권4호
• /
• pp.269-280
• /
• 2009

In this paper an experimental study of the influence of hot springs curing upon concrete properties was carried out. The primary variables of the investigation include water-to-binder ratio (W/B), pozzolanic material content and curing condition. Three types of hot springs, in the range $40-90^{\circ}C$, derived from different regions in Taiwan were adopted for laboratory testing of concrete curing. In addition, to compare with the laboratory results, compressive strength and durability of practical concrete were conducted in a tunnel construction site. The experimental results indicate that when concrete comprising pozzolanic materials was cured by a hot spring with high temperature, its compressive strength increased rapidly in the early ages due to high temperature and chloride ions. In the later ages, the trend of strength development decreased obviously and the strength was even lower than that of the standard cured one. The results of durability test show that concrete containing 30-40% Portland cement replacement by pozzolanic materials and with W/B lower than 0.5 was cured in a hot spring environment, then it had sufficient durability to prevent steel corrosion. Similar to the laboratory results, the cast-inplace concrete in a hot spring had a compressive strength growing rapidly at the earlier age and slowly at the later age. The results of electric resistance and permeability tests also show that concrete in a hot spring had higher durability than those cured in air. In addition, there was no neutralization reaction being observed after the 360-day neutralization test. This study demonstrates that the concrete with enough compressive strength and durability is suitable for the cast-in-place structure being used in hot spring areas.

• 한국건설순환자원학회논문집
• /
• 제10권1호
• /
• pp.80-91
• /
• 2022

본 연구에서는 초지연제 혼입률, 양생온도 및 강도수준 변화에 따른 응결지연 특성을 실험적으로 고찰하고, 응결시간과 수화반응속도 관점에서 이들의 영향을 정량적으로 평가할 수 있는 적산온도를 이용한 응결시간 예측식을 제안하고자 하였다. 그 결과, 양생온도, 강도수준(물결합재비) 및 초지연제 혼입률을 결정한 뒤 본 연구에서 제안한 모델식에 대입하면 응결시간을 예측할 수 있다. 모델식의 경우에는 결정계수가 0.9 이상으로 나타났으며, F-검정을 통해 그 신뢰성을 확인하였다. 최종적으로 본 논문에서 제안한 모델식을 활용하면 실무에서 초지연 콘크리트의 응결과 관련하여 합리적인 품질관리가 가능할 것으로 판단된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권2호
• /
• pp.171-175
• /
• 2010

본 연구는 동결융해, 염해 및 중성화가 복합적으로 작용하는 콘크리트 구조물의 내구성능을 평가하기 위하여 일반강도 콘크리트를 대상으로 동결수를 달리하여 동결융해 시험을 실시함으로서 염해와 동결융해 복합작용에 의한 콘크리트의 열화를 평가하였고, 염해, 동결융해 및 중성화의 세가지 열화가 복합적으로 발생되는 복합열화에 대해서는 적절한 평가방법이 부재하여 동결수에 따른 동결융해 시험 후의 시험체에 대하여 중성화 촉진시험을 실시함으로서 복합열화에 의한 콘크리트 내구성능 저하 특성을 평가하고자 하였다. 본 연구를 통하여 동결수의 종류나 물-결합재비 수준과 무관하게 고로슬래그미분말을 사용한 배합의 경우 염해와 동결융해가 동시에 복합적으로 발생되는 환경에서도 우수한 저항성능을 보이는 결과를 나타내므로 동결융해를 포함한 복합열화 환경에서 충분한 내구성 확보를 위해서는 최소한의 설계기준강도의 확보와 고로슬래그미분말 등 적절한 시멘트 결합재의 선정이 무엇보다 중요하다는 결론을 얻었다.