• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.2
• /
• pp.86-96
• /
• 2003

This study was conducted to investigate use possibility of pharmaceutical byproducts(process sludge) and waste water sludges as raw materials of organic compost at Fertilizer Official Regulation of Fertilizer Management Law in 2002. All pharmaceutical byproducts were satisfied the standard levels of raw material regulated in organic compost, some waste water sludges were deficient in the level. The content of n-hexane extractable material(HEM) was in byproduct higher than in waste water sludge. This was presumed that the sludge with containing a lot of organic matter was high in HEM content. Of the whole microorganism flora, bacteria was mainly detected, and yeast and filamentous fungi took up less population which was fluctuated depending on the source of sludges. Most dominated bacteria were identified into Genus of Pseudomonas. Pseudomonas syringae and Rathayibacter bathayi was classified as plant pathogenic bacteria.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.1
• /
• pp.25-32
• /
• 2014

In order to investigate the effective pretreatment methods in WAS(=waste activated sludge) solubilization, the values of SCOD yield per unit SS (SCOD/gSS.hr) were compared. After the hydrodynamic cavitation with pH of 12.5, SCOD increased to 7800 mg/L, SS decreased to 45 % and the solubilization rate was 29 %. Combination of alkality (pH 12.5) and the cavitation seems to be the optimal condition for sludge solubilization. After the cavitational pretreatment, efficiencies of anaerobic digestion of the unfiltered sludge(the control), raw sludge and pretreated sludge were evaluated with BMP(=biochemical methane potential) tests. For evaluation of the biodegradability characteristics of pretreated sewage sludge, the methane production has been measured for 6 months. The methane production of pretreated sludge increased 1.4 times than that of untreated sludge. The result indicates that the cavitationally pretreated sludge was a better biodegradability substrate in anaerobic condition compared to raw sludge. It is obvious that cavitational pretreatment could enhance not only solubilization but also biodegradability of WAS. In conclusion, cavitational pretreatment of WAS to convert the particulate into soluble portion was shown to be effective in enhancing the digestibility of the WAS.

• Journal of Korean Society on Water Environment
• /
• v.21 no.2
• /
• pp.147-152
• /
• 2005

Fermentation efficiencies of organic wastes from the variety of sources were evaluated based on the production of total volatile acids(TVA) in batch reactor. Mixing and pH were not significant factors in producing TVA from the organic wastes. After a 10-day fermentation, final TVA concentrations in piggery, cattle, poultry, and primary settled sludge of domestic wastewater were 8,900, 2,900, 7,370 and 1,630 mg/L, respectively. The pH of organic wastes was decreased from neutral to 5.7. The ratio of TVA to $NH_4{^+}-N$ produced from the animal waste ranged from 11.5 to 30.1, whereas, that in the primary settled sludge of domestic wastewater, was 5.4. Possibility of fermented organic wastes as the electron donors for denitrification in the activated sludge was investigated. In both acclimated and nonacclimated activated sludge, higher denitrification rates were obtained with fermented piggery sludge added than with either methanol or acetate added. The fermented organic acids derived from the primary settled sludge gave the higher denitrification rate ($4.2mg\;NO_3-N/g\;vss{\cdot}hr$) in the acclimated activated sludge. Denitrification rate was $1.5mg\;NO_3-N/g\;vss{\cdot}hr$ in the nonacclimated sludge with the fermented acids from the primary settled sludge of domestic wastewater added.

• Journal of Power System Engineering
• /
• v.18 no.3
• /
• pp.93-99
• /
• 2014

The purpose of this paper is to manufacture the non-sintered ceramic used lime and industrial waste. The used materials were basalt powder sludge, calcium hydroxide(Ca(OH)2) and additives such as calcium stearate and $TiO_2$. The mixing ratios between Ca(OH)2 and sludge were 5:5, 6:4 and 8:2, respectively. The ceramic forms were pressured by 100, 200 and 300 bar and cured in 14% CO2 for 12 days. The behaviors of compressive strength, specific gravity, water absorption and pH of ceramic form were investigated. The results were compressive strength of over 36 MPa, water absorption of over 8.8%, pH value of over 12.3. And these results satisfied GR F 4006 and 4031 standard.

• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.2
• /
• pp.117-123
• /
• 1996

A bench-scale continuous activated sludge system was operated in order to study the effects of solid waste landfill leachate on municipal wastewater treatment. The leachate sample was collected from Nanjido landfill. During the 7 weeks of operational period, the leachate content in the influent fed to the system was increased stepwise from 3% to 5% and 7%. The solids retention time was the major process control parameter, and it was 10 days. With the municipal wastewater alone, COD removal was 75%. The removal percents, however, decreased to 60% and 45% when the leachate content was 3% and 7%, respectively. For the wastewater spiked with the leachate, the sludge production was higher than for the municipal wastewater alone. Sludge settleability determined by SVI deteriorated with the increase of leachate content. The specific oxygen uptake rate, however, was measured higher as leachate content increased.

• Journal of Mushroom
• /
• v.5 no.1
• /
• pp.43-49
• /
• 2007

Application of sludge wastes into the field may help soil fertility with physical, chemical and biological properties. Efficient use of sludge waste, however, requires an individual assessment of the waste products. A lot of experiment into the organic waste-treated soils has been done for decade. However, studies have not been carried out on the assessment of agricultural soil by Basidiomycota. This study was assessed the influence of sludge application on soil healthy in agricultural upland soils. The organic wastes selected for long-term application experiment in this study were municipal sewage sludge (MSS), industrial sewage sludge (ISS), leather processing sludge (LS), alcohol fermentation processing sludge (FS), and pig manure compost (PMC). To develop the soil healthy assesment method, soil samples were diluted by 20X with distilled water. After shaking at 200rpm for 30 minutes, the shaked sample was mixed on PDA(Potato Dextrose Agar). And sterilized at $121^{\circ}C$ for 20 minutes. Coriolus hirsutus (MKACC 50560) was inoculated on petri-dish including PDA mixed sample. After the media was incubated at $25^{\circ}C$ for five days, the mycelial growth of C. hirsutus was measured. When the mycelial growth on sample media was compared with growth on media contained PDA only, well grown media contained sample soil was assesed as healthy soil. The results suggest that the simple method by Coriolus hirsutus is a handy way to assess the healthy of waste sludge-applied upland soils.

• KSBB Journal
• /
• v.20 no.6
• /
• pp.438-442
• /
• 2005

Batch experiments were performed to investigate the effects of volumetric mixing ratio(v/v) of two substrates, food wastes(FW) and waste activated sludge(WAS). In batch experiments, optimum mixing ratio for hydrogen production was found at $10{\sim}20$ v/v % addition of WAS. CSTR(Continuous Stirred tank reactor) was operated to investigate the hydrogen productivity and the microbial community under various HRTs and volumetric mixing ratio(v/v) of two substrates. The maximum yield of specific hydrogen production, 140 mL/g VSS, was found at HRT of 2 day and the volumetric mixing ratio of 20:80(WAS:FW). The spatial distribution of hydrogen producing bacteria was observed in anaerobic fermentative reactor using fluorescent in situ hybridization(FISH) method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.209-212
• /
• 1990

The activated sludge process is a commonly used method for treating sewage and waste waters. The process is characterized by a lack of measurement instrumentations and control goals that are neither well defined nor well understood. In the present study the concept of fuzzy control is employed for such process in which a design method for fuzzy controller based on a multivariable fuzzy reasoning algorithms is investigated and then simulation results are presented.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.6
• /
• pp.83-89
• /
• 2008

The stone sludge produced during the manufacturing process of stone blocks is considered as one of industrial waste materials. This stone sludge are managed to either burying under the ground or stacking in the yard, but this disposal process is required an extra costs. The stone sludge disposal like burying or stacking also cause environmental pollutions such as ground pollution and subterranean water pollution. Thus, this study was conducted to explore the possibility of recycling of stone dust sludge as a concrete mixing material in order to extend recycling methods and to solve the shortage of aggregate caused by recently increased demand in construction. Based on the experiment results on various ratios of cement to stone sludge content, the compressive strengths of concrete were recorded in the range of $20{\sim}30N/mm2$. The results did not show any decrease in compressive strength due to the stone dust content. It can be concluded that the stone sludge produced by stone block manufacturing can be sufficiently recycled as one of concrete mixing materials in the aspect of compressive strength.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.3
• /
• pp.172-177
• /
• 2014

Low pressure air flotation (LAF) pilot plant for sludge thickening was installed in Chung Nam N.S. municipal waste water treatment plant to verify its application possibility. Effects of operating conditions such as coagulant dosages and microbubble water ratio on thickening of the mixed sludge were examined. Microbubbles which were generated in the chamber of $1.5kgf/cm^2$ by high speed collision method with foaming agent were used to float sludge. Solid loading of $30kg/m^2/hr$, solid contents in thickened sludge of 60,300 mg/L and SS removal efficiency of 99% were obtained through long period operating LAF in conditions of mixed sludge concentration of 14,400 mg/L, coagulant dosage of 27.6 mg/L, foaming agent addition of 4.0 mg/L and microbubble water injection ratio of 9.7%.