• Journal of KIISE:Computing Practices and Letters
• /
• v.12 no.1
• /
• pp.1-8
• /
• 2006

Since most CAD tool companies are carrying out very expensive license policies, designers are sharing CAD tools with a limited number of licenses within a design working or research group. It is important to share and use them efficiently, because CAD tool licenses are very valuable resources. Designers should know CAD tool license information such as available number of licenses, types, and configuration methods to use CAD tools properly in their group. Usually, this information is provided by managers who administrate CAD tool license servers in the specific design group. In the previous CAD tool licenses sharing methods, designers have to get CAD tool license information manually and setup the environments with their own hands, If a new designer comes into the design working group, the designer wastes unnecessary time and effort due to these manual processes. As a result, designer's productivity and utilization of CAD tools will decrease. Besides, managers also waste their time and effort, since they should provide CAD tool license information manually to each desiEner. In this paper, we present a more efficient scheme to share CAD tool licenses based on directory service. The proposed method automates not only the communication processes between managers and designers, but also the license configuration steps. We expect this scheme will reduce time and effort of designers and managers as well as enhance the utilization of CAD tools.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.4
• /
• pp.635-640
• /
• 2001

These studies were carried out to develop sausage using extracts from waste resources. The changes of pH and moisture contents were tended to be a similar to control, respectively ranged in pH 6.0~6.4 and 62~60% in moisture content. However, the water holding capacity of sausage added with chitosan and sesamol gradually were tended to be a little high, compared to control. The treatments using natural resource by-product revealed a low TBARS value, compared to control. This means that sausage added with natural by-product seem to be extend its shelf-life during storage. At the same time, the TBARS values were very similar to sausage added with 0.5% potassium sorbate. The residual nitrite contents of sausage added with natural resource by-product were tended to be a little lower than that of control. As storage time goes by, the nitrite contents of sausage product gradually were a little more decreased during storage at 3$0^{\circ}C$ than those of storage at 1$0^{\circ}C$. The lightness of sausage color gradually were a little more decreased during storage at 3$0^{\circ}C$ than those of storage at 1$0^{\circ}C$. The redness of sausage added with chitosan were a little highter, compared to control Sensory test suggested that the changes of sausage color, flavor, texture and taste were tended to be decreased gradually. In conclusion, sausage added with natural resource by-product was effective on the basis of the reduction in residual nitrite content and lipid oxidation.

• Journal of Agricultural Extension & Community Development
• /
• v.16 no.2
• /
• pp.363-384
• /
• 2009

This study aimed at finding directions for Korean agriculture to establish a new paradigm of sustainable development. Various problematic issues and concerns in the environment necessitate the transformation of Korea's development paradigm from unconditional growth to "Green Growth" through new policies on green value and review of various advanced researches. In this research, the environment-friendly agriculture's problems, particularly in agribusiness were analyzed. Drawing from Michael Porter's Value Chain Analysis, this research developed a value chain model in agriculture that reflects the environment and the present situations. Future directions in the agriculture sector were also discussed. Korea realized food self-sufficiency through the green revolution in the early 1970s. However, a lot of problems have also occurred, including ground and water pollution and the destruction of ecosystems as a result of the overuse of pesticides and chemical fertilizers. In the late 1970s, the growing interest on environment-friendly agriculture led to the introduction of sustainable methods and techniques. Unfortunately however, these were not innovative enough to foster environment-friendly agriculture. Thereafter, the consumers' distrust on agricultural products has worsened and concerns about health have increased. In view of this, the Ministry of Food, Agriculture, Forestry and Fisheries introduced in December 1993 a system of Quality-Certified Products for organic and pesticide-free agri-foods. Although a fundamental step toward the sustainability of the global environment, this system was not enough to promote environment-friendly agriculture. In 2008, Korea's vision is for "Low Carbon Green Growth" to move forward while also coping with climate change. But primary sectors in a typical value chain do not consider the green value of their operations nor look at production from an environmental perspective. In order to attain sustainable development, there is a need to use less resources and energy than what is presently used in Korean agricultural and value production. The typical value chain should be transformed into a "closed-loop" such that the beginning and the end of the chain are linked together. Such structure allows the flow of materials, products and even wastes among participants in the chain in a sustained cycle. This may result in a zero-waste sustainable production without destroying the ecosystem.

• Korean Business Review
• /
• v.18 no.1
• /
• pp.59-79
• /
• 2005

recently, world is progressing large quantity consumption with continuous Innovation and economic growth and pollution is accelerated at these process. Increase of industry activity and service that is point of corporation activity is discharging environmental pollutants at whole process to manufacture of end product and exhaust process from acquisition of raw material for accompanied product production hereupon. At the same time, being promoting resources consumption by that use much raw material, As a result, is becoming obstacle factors in sustainable development. So, corporation's responsibility for environmental protection is emphasized. Corporation which must prepare in green round or environmental problems should consider environmental effects that is happened over whole life of products that include waste treatment after raw material acquisition and use as well as selling end product simply. A Life Cycle Assessment techniques is normalized and standardized in International Standard Organization for technical committee 207(TC 207) world widely, and effort to apply in corporation's activity because mastering LCA techniques in domestic several corporations is undergone actively. Coming into effect of Kyoto's Protocol and International Organization for Standard 14000 series revision are presenting new survival principle in competition between country or corporation. LCA technique may become very useful means to corporation which wish to attempt environment management in real condition that awareness for environment is important. Also, An LCA to each product is going to cause big effects in corporation's whole image as well as competitive power raising for single product. Therefore, this research wishes to examine some instances for the future competitive product development at the estimation of environmental friendliness using LCA techniques and more theoretical considerations of the LCA techniques that can dominate corporation's fate.

• Journal of Environmental Health Sciences
• /
• v.40 no.5
• /
• pp.331-345
• /
• 2014

Objectives: The exponential growth of chemicals, an area of high concern in developed countries like the US (i.e., the Gore Initiative) and in the EU (i.e., REACH), as well as recent chemical accidents in Korea, have provoked nationwide concerns and resultant legal enforcement. This study aims to compare the laws of the Ministry of Environment (the Chemical Substances Control Act (CSCA), Act on the Registration and Evaluation, etc. of Chemical Substances (ARECS)) with those of the Ministry of the Employment and Labor (Occupational Safety and Health Act (OSHA)). Methods: Each law pertaining to the Ministry of Environment and the Ministry of the Employment and Labor was downloaded from the official legal information system (www.law.go.kr). The objectives of each law and the major contents related to chemical management were compared and summarized. Results: The CSCA and the ARECS are focused on the protection of people and the environment, while the OSHA relates to the protection of workers. The right to know of people and workers has been reinforced. The former two laws emphasize prevention, but the OSHA contains both preventive and post-accident measures. The role of the Ministry of Employment was reinforced with the promulgation of the CSCA and ARECS, which contain regulations such as adjacent area impact evaluation, risk control planning, chemical statistical survey and construction and operation of information, provision of risk control plans, response to chemical accidents and registration of chemical substances. Conclusion: We found that the three laws discussed here have several similar clauses designed to protect people and the environment from risks that may be caused by the use of chemicals, even though there are some differences among them in terms of objectives and contents. This review concluded that several clauses that can be regarded as double regulation should be unified in order to minimize the waste of government administrative resources and socio-economic losses.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.9-16
• /
• 2005

A new online routing algerian is proposed in this paper, which use the interference-prediction to solve the network congestion originated from extension of Internet scope and increasing amount of traffic. The end-to-end QoS has to be guaranteed in order to satisfy service level agreements (SLAs) in the integrated networks of next generation. For this purpose, bandwidth is allocated dynamically and effectively, moreover the path selection algorithm is required while considering the network performance. The proposed algorithm predicts the level of how much the amount of current demand interferes the future potential traffic, and then minimizes it. The proposed algorithm considers the bandwidth on demand, link state, and the information about ingress-egress pairs to maximize the network performance and to prevent the waste of the limited resources. In addition, the interference-prediction supports the bandwidth guarantee in dynamic network to accept more requests. In the result, the proposed algorithm performs the effective admission control and QoS routing. In this paper, we analyze the required conditions of routing algorithms, the aspect of recent research, and the representative algorithms to propose the optimized path selection algorithm adequate to Internet franc engineering. Based on these results, we analyze the problems of existing algorithms and propose our algorithm. The simulation shows improved performance by comparing with other algorithms and analyzing them.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.25-31
• /
• 2018

In this study, the Controlled Low Strength Material (CLSM) was investigated to utilize the bottom ash and fly ash generated in the Circulating Fluidized Bed Combustor (CFBC). It was confirmed that the CFBC fly ash (CFBC-F) and CFBC bottom ash (CFBC-B) had an irregular particle shape through SEM measurement. According to the results of the hazard analysis, it was also confirmed that they were environmentally safe. In the case of mixing with CFBC-F, the unit quantity was increased. Regarding the rate of change of length, shrinkage in the range of -0.05~0.50% occurred in the air dry curing condition and expansion in the range of 0.1~0.6% in the sealed curing condition. Compressive strength was increased in the sealed curing condition compared to the air dry curing condition because there was enough moisture for hydration reaction in the long term. Therefore, the results of this study are likely be used as basic research data of mine filler materials.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.377-386
• /
• 2003

In this paper, we present an application layer protocol to support secure wireless Internet services, called Application Layer Security(ALS). The drawbacks of the two traditional approaches to secure wireless applications motivated the development of ALS. One is that in the conventional application-specific security protocol such as Secure HyperText Transfer Protocol(S-HTTP), security mechanism is included in the application itself. This gives a disadvantage that the security services are available only to that particular application. The other is that a separate protocol layer is inserted between the application and transport layers, as in the Secure Sockets Layer(SSL)/Transport Layer Security(TLS). In this case, all channel data are encrypted regardless of the specific application's requirements, resulting in much waste of network resources. To overcome these problems, ALS is proposed to be implemented on top of HTTP so that it is independent of the various transport layer protocols, and provides a common security interface with security applications so that it greatly improves the portability of security applications. In addition, since ALS takes advantages of well-known TLS mechanism, it eliminates the danger of malicious attack and provides applications with various security services such as authentication, confidentiality integrity and digital signature, and partial encryption. We conclude this paper with an example of applying ALS to the solution of end-to-end security in a present commercial wireless protocol stack, Wireless Application Protocol.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.54-61
• /
• 2005

An aquifer thermal energy storage (ATES) system can be very cost-effective and renewable energy sources, depending on site-specific parameters and load characteristics. In order to develop the ATES system which has certain hydrogeological characteristics, understanding the thermohydraulic process of an aquifer is necessary for a proper design of an aquifer heat storage system under given conditions. The thermohydraulic transfer for heat storage was simulated according to two sets of simple pumping and waste water reinjection scenarios of groundwater heat pump system operation in a two-layered aquifer model. In the first set of the scenarios, the movement of the thermal front and groundwater level was simulated by changing the locations of injection and pumping wells in a seasonal cycle. However, in the second set the simulation was performed in the state of fixing the locations of pumping and injection wells. After 365 days simulation period, the shape of temperature distribution was highly dependent on the injected water temperature and the distance from the injection well. A small temperature change appeared on the surface compared to other simulated temperature distributions of 30 and 50 m depths. The porosity and groundwater flow characteristics of each layer sensitively affected the heat transfer. The groundwater levels and temperature changes in injection and pumping wells were monitored and the thermal interference between the wells was analyzed to test the effectiveness of the heat pump operation method applied.

• Journal of Animal Environmental Science
• /
• v.16 no.1
• /
• pp.51-60
• /
• 2010

This experiment was conducted to investigate the effects of concentrated pig slurry separated from membrane filter and by environment-friendly agro-materials mixtures on growth of lettuce in hydroponics. The swine waste treatment system having a ultra filtration and a reverse osmosis process was designed in this study. Filtration of pig slurry was necessary to prevent the hose clogging in hydroponics. Primary separation using ultra filter was followed by concentration by RO (Reverse Osmosis). The concentrated pig slurry (CS) was mixed by five different environment-friendly agro-materials mixtures. The chemical nutrient solution was the solution of National Horticulture Research Station for the growth of lettuce. The concentration of nutrient solution in hydroponics was adjusted a range of 1.5 mS/cm in EC. The concentrated pig slurry was low in phosphorus(P), suspended solid and heavy matal, but rich in potassium (K). The concentrated slurry was lowest in the growth characteristics of leaf lettuce. And also SPAD value in leaf was reduced in plot treated with concentrated slurry. But the growth of lettuce in the mixtures plot (CS+BM+AA, CS+BM+AA+SW) in hydroponics was significantly high compared to concentrated slurry. The fresh yield of lettuce was 78, 84% that of nutrient solution as 131.9, 142.2g in plot of CS+BM+AA and CS+BM+AA+SW, respectively. Our studies have shown that it is possible to produce organic culture using concentrated slurry and environment-friendly agro-materials mixture, although growth is slower than when using a conventional inorganic hydroponic solution.