• Journal of the East Asian Society of Dietary Life
• /
• v.9 no.1
• /
• pp.64-73
• /
• 1999

The purpose of this study was to estimate the effect of serving sizes on dish wastes, nutrient intake, and diet satisfaction for reduction of dish waste products. The dish waste, energy and protein intake, and satisfaction scores before and after dining were compared in 44 subjects fed various serving sizes(100%, 90%, 80% of standard size) of 10 frequently consumed Korean dishes. The result are as follows: 1. Average age, height, and weight of 44 subjects were 30.5, 174.0cm, and 68.1kg in men and 26.2, 164.2cm, and 53.5kg in women, respectively. 2. There was a significant difference in the dish waste rate of 10 Korean dishes to serving sizes. The range of dish waste rates of 10 Korean dishes was 13.14-33.04%. 3. The average energy intake from 10 Korean dishes in which 100% of the standard serving size was served was lower than Korean RDA. Protein intakes from Sulungtang, Yukgaejang, Deunjang-ggigae, and Bibimpab with 100% servins size, Soondubi-ggigae 90% servins size, and Galbitang, Bulgogi-bakpan, Sangsungui-bakpan, Bakpan 80% of standard serving size were higher than Korean RDA. 4. The satisfaction score before dining on Sulungtang, Bulgogi-bakpan, Sangsungui-bakpan decreased with decreasing serving size. However, there was no significant difference in satisfaction score after dining to serving size. These findings indicate that dish waste rate and diet satisfaction of 10 these Korean dishes are fixed and energy intake is insufficient. Therefore, for reduction of food waste and reasonable serving size of dishes evaluated in this study, there should be more studies about Korean menu development with decreasing serving size and increasing energy density.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.6
• /
• pp.606-614
• /
• 2017

Amount of food waste has been increased annually in Korea and re-use of food waste as a fertilizer or soil amendment in agricultural field has been studied. Therefore, main purpose of this research was to determine optimum condition of hydrolysis for food waste management. Three different solvents, HCl, $H_2SO_4$, and KOH, were used and varied concentration at the range of 10~30% and hydrolysis time at the range of 1~3 hours were evaluated. In general, reduction rate of food waste was increased when concentration of solvent and hydrolysis time was increased except when KOH was used. Among different solvents, concentration, and hydrolysis time, the highest reduction rate (97.79%) was observed when 30% of HCl was used with temperature of $140^{\circ}C$ at 2 hours of hydrolysis time. In addition, neutralization effect of alkalic materials, shell waste (SW) and egg shell (ES) was evaluated. Both SW and ES increased pH of finished acid hydrolysis solution up to 7.61 indicating that neutralization effect of SW and ES was sufficient for finished acid hydrolysis solution. Contents of organic matter was also at the range of 10.7~13.04% and 5.53~8.04% respectively when HCl and $H_2SO_4$ were used as solvent. Overall, hydrolysis technique can be used to manage food waste with selected optimum condition in this study and characteristics of finished hydrolysis solution after neutralization might be suitable for soil amendments.

• Korean Journal of Organic Agriculture
• /
• v.5 no.1
• /
• pp.125-135
• /
• 1996

A study was made to investigate the possibility of treating various organic waste of cattle manure, swine manure, goat manure, apple pomace, chinese medicine residue and coffee less by feeding these to earthworms and then by studying the growth and reproductive efficiency of earthworms, and the chemical composition of worm cast and its production. The results are summarized as follows. 1. When the feed for earthworms were in good condition which were cattle manure, swine manure and apple pomace, the reproductive efficiency of earthworms was improved however in worse condition the feed of which were goat manure and chinese medicine residue, the increasing rate(IR) became faster. 2. Despite the high content of organic matter(OM) in coffee lees, the earthworms fed coffee lees showed significantly lower reproductive efficiency and increasing rate(IR) than those fed other organic waste due mainly to its lower pH and lower total nitrogen(TN) content. Therefore, when coffee lees is considered to be fed to earthworms, it is believed necessary to be mixed with addiveves or other organic waste in order to improve the feed condition. 3. pH in swine manure, goat manure, apple pomace, chinese medicine residue and coffee lees became neutralized by being fed by earthworms. 4. Available P2O5 and exchangeable cation(EC) of earthworm cast were a little increased compared to those of feed. The contents of Mn, Fe and Cu in earthworm cast were a little decreased to compared to those of feed. 5. The contents of Mn, Fe and Cu in earthworm cast were a little a decreased to compared to those of feed. 6. Mean fresh weight of earthworm at final time(FW2) was negatively correlated with number of young worms(NY)(P<0.01), but positively with increasing rate(IR) (P<0.001) and C/N ratio(P<0.05) respectively. Number of cocoons (NC) and fresh weight of cocoons(WC) were positively(P<0.01) correlated with fresh weight of young worms (WY) and digested matter(DI) but negatively(P<0.001) correlated with residual matter(WY) and digested matter(DI) but negatively(P<0.001) correlated with residual matter(RW). Number of young worms(NY) and fresh weigh of young worms(WY) were negatively(P<0.001) correlated with increasing rate(IR), however increasing rate(IR) of earthworm was positively(P<0.05) correlatedd with C/N ratio.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.5
• /
• pp.573-579
• /
• 2014

VFAs like acetate are the major soluble metabolites of food waste leachates after digested. Therefore this study investigates the effect of acetate on growth rate and nutrient removal efficiency of Chlorella vulgaris to treat digested food waste leachates. The initial acetate concentration varied from 0 to 20 mM. As a result, Chlorella vulgaris growth rate was increased as high as the concentrations ranged from 0 to 20 mM. The same trend was observed with $NH_4$-N and $PO_4$-P consumption. The highest growth rate and the highest $NH_4$-N, $PO_4$-P removal rate were observed at acetate concentration of 20 mM. The microalgae growth rate and $NH_4$-N, $PO_4$-P removal rates were 1.5, 1.8, 2.3 times higher than the condition without acetate.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.2
• /
• pp.159-165
• /
• 1999

Experimental studies have been performed to observe the basic phenomena of waste bed combustion in MSW incinerator. A reduced scale apparatus was utilized to simulate the combustion behavior in real plant with 1-dimensional transient behavior at the experimental setup, which uses wet cubic wood with ash content as simulated waste. LHV (lower heating value) of solid fuel, fuel particle size and flow rate of combustion air were taken as important parameters of the bed combustion. For the quantitative analysis, FPR (flame propagation rate), TBT (total burn-out time) and PBT (particle burn-out time) was defined. LHV represent the capability of heat release of the fuel, so that a higher LHV results in faster reaction rate of the fuel bed, which is shown by higher FPR. Fuel particle size is related with surface area per unit mass as well as heat and mass transfer coefficient. As the particle size increases the FPR decreases owing to decreasing specific surface area. Air injection supplies oxygen to the reaction zone. However oversupply of combustion air increases convection cooling of the bed and possibly extinguishes the flame.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.6
• /
• pp.287-293
• /
• 2014

Internal combustion engines release 30~40% of the energy from fossil fuels into the atmosphere in the form of exhaust gases. By utilizing this waste heat, plenty of energy can be conserved in the auto industry. Thermoelectric generation is one way of transforming the energy from engine's exhaust gases into electricity in a vehicle. The thermoelectric generators located on the exhaust pipe have been developed for vehicle applications. Different experiments with thermoelectric generators have been conducted under various test conditions as following examples: hot gas temperature, hot gas mass flow rate, coolant temperature, and coolant mass flow rate. The experimental results have shown that the generated electrical power increases significantly with the temperature difference between the hot and the cold side of the thermoelectric generator and the gas flow rate of the hot-side heat exchanger. In addition, the gas temperature of the hot-side heat exchanger decreases with the length of the thermoelectric generator, especially at a low gas flow rate.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.4
• /
• pp.411-428
• /
• 2022

Given the domestic situation, all nuclear power plants are located at the seaside, where interim storage sites are also likely to be located and maritime transportation is considered inevitable. Currently, Korea does not have an independently developed maritime transportation risk assessment code, and no research has been conducted to evaluate the release rate of radioactive waste from a submerged transportation cask in the sea. Therefore, secure technology is necessary to assess the impact of immersion accidents and establish a regulatory framework to assess, mitigate, and prevent maritime transportation accidents causing serious radiological consequences. The flow rate through a gap in a containment boundary should be calculated to determine the accurate release rate of radionuclides. The fluid flow through the micro-scale gap can be evaluated by combining the flow inside and outside the transportation cask. In this study, detailed computational fluid dynamic and simplified models are constructed to evaluate the internal flow in a transportation cask and to capture the flow and heat transfer around the transportation cask in the sea, respectively. In the future, fluid flow through the gap will be evaluated by coupling the models developed in this study.

• Journal of Environmental Science International
• /
• v.6 no.5
• /
• pp.497-503
• /
• 1997

This study was performed to Investigate the utilization of waste concretes for neutralization and removal of heavy metals In plating wastewater, because waste concretes have been known to be very porous, to have high species surface area and to have alkaline minerals such as calcium. The results obtained from this research showed that waste concretes had a buffer capacity to neutralize an acidic alali system in plating wastewater. Generally, neutralization and removal rate of heavy metals were excellent in the increase of waste concrete amounts and a small size. Because a coefficient of correlation was high, it seemed that removal of heavy metals could be explained by Freundlich and Langmuir isotherms. If we reflected the adsorption capacity(k) and adsorption intensity(1/n) of Freundlich isotherm, we couldn't consider waste concretes as a good adsorbent. But, we could know that waste concretes were capable of removing a part of heavy metals. In point of building waste debris, if waste concretes substituted for a valuable adsorbent such as actuated carbon, they could look forward to an expected economical effect.

• Advances in concrete construction
• /
• v.15 no.1
• /
• pp.63-74
• /
• 2023

All production and consumption activities produce wastes, which often cause damage to our environment and multiple risks to the human health. The valorization of these wastes in concrete technology is a future solution that will allow finding other construction materials sources, optimizing energy consumption and protecting the environment. Among these wastes, there is the marble waste. Every year, huge amount of marble waste is discarded as dust or aggregates form, in open-air storage areas causing serious problems for the environment and public health. In this context, the incorporation of marble waste as a replacement of ordinary aggregates or cement in concrete composition is actively investigated by researchers. This paper presents a comprehensive review of published studies over the last 20 years, dealing the effect of marble waste on fresh and hardened properties of concrete. Most of the studies carried out have used marble waste as dust with substitution rates between 5 and 20%. Besides the economic and ecological benefits, this review showed that marble waste can improve the physical, mechanical and durability properties of concrete. This improvement depends on the form (dust, fine aggregate or coarse aggregate), substitution method (as cement or aggregates replacement) and substitution rate of marble waste. Additionally, the review results showed that the use of 10-15% of marble waste dust as cement substitution can lead to increase the compressive strength.

• Journal of Korean Society on Water Environment
• /
• v.20 no.6
• /
• pp.583-588
• /
• 2004

This research examined the treatment efficiency and methane production rate in treating slurry-type swine waste using UASB (upflow anaerobic sludge blanket) reactor. The UASB reactor was operated at an organics volumetric loading rate (VLR) of $2.6-15.7kgCOD/m^3/day$. A stepwise increase of the VLR resulted in a temporary deterioration in the COD removal rate in UASB reactor but recovered quickly. The COD removal rate were 65-70% for VLR up to $5 kgCOD/m^3/day$. When organics VLR was $10kgCOD/m^3/day$, the COD removal rate decreased sharply and there was loss of 17.537g of the seeding biomass due to sludge washout. This result indicated that the UASB system cannot be adapted to more than $10kgCOD/m^3/day$ of VLR. As the organic load increased from 2.6 to $15.7kgCOD/m^3/d$, the biogas production rate varied from 3.2 to 10.8 L/d and the methane conversion rate of the organic matter varied from 0.30 to $0.23m^3CH_4/kg\;COD_{removed}$. The methane content showed the range of 70.1-81.5% during the experimental period. The volatile solids (VS) removal efficiency was similar at the low VLR (< $5 kgCOD/m^3/day$), but it decreased sharply at the high VLR (> $5 kgCOD/m^3/day$). The VS reduction rate was, moreover, large those of COD. The result shows that hydraulic retention time above 2 days is essential in case of treating wastewater containing 1% of solids.