• 제목/요약/키워드: waste PCB

검색결과 54건 처리시간 0.024초

GC/ECD와 HRGC/HRMS 분석을 이용한 변압기 절연유 중 PCBs 농도 및 이성체 분포 (PCBs concentration and congener distribution in transformer insulation oil samples using GC/ECD and HRGC/HRMS analysis)

  • 김경수;김형섭;송병주;정미정;김종국;박석운;신선경
    • 분석과학
    • /
    • 제18권3호
    • /
    • pp.232-240
    • /
    • 2005
  • 절연유 중 PCBs 총 농도를 GC/ECD와 HRGC/HRMS를 이용하여 정량한 결과 각각 N.D. ${\sim}154.04{\mu}g/g$$0.087{\sim}223.6{\mu}g/g$(TEQ 농도는 0.00067~6.8 ng WHO-TEQ/g)으로 검출되었으며, 6개의 시료에서 2 ppm을 초과하였다. 고농도 시료일수록 정량방법의 차이로 인해 ECD와 HRMS의 분석결과가 차이를 나타내었다. 절연유 중 PCBs의 피크패턴 및 군집분석을 사용하여 시료에 함유된 PCBs 제품형태를 추정할 수 있었으며, Aroclor 1248 제품은 함유되어 있지 않았다. Co-PCBs 이성체 분포에 있어서 non-ortho 치환 이성체에 비해 mono-ortho 치환 이성체가 높은 비율을 나타내었으며, PCB-167 이성체가 가장 높은 비율을 차지하였다. 또한 절연유 중 Co-PCBs의 이성체패턴은 소각로 배출가스, 환경 대기시료 뿐만 아니라 PCBs 제품(Aroclor, Kanechlor)과도 다른 이성체 패턴을 나타내었다.

유해폐기물 처리용 소각 대체기술 동향 (On the Alternative Incineration Technologies for the Treatment of Hazardous Waste)

  • 양희철;조용준;은희철;김응호
    • Korean Chemical Engineering Research
    • /
    • 제45권4호
    • /
    • pp.319-327
    • /
    • 2007
  • 소각은 유기성 유해폐기물에 대해 가장 발달된 유용한 처리기술로 인정되어 왔다. 그러나 PCBs와 같이 유해한 폐기물의 처리를 위한 소각로의 부지확보나 인허가가 유해한 대기오염 물질의 배출에 대한 주민의 우려로 용이하지 않다. 최근에 많은 소각 대체기술들이 개발되어 왔으며 이 기술들은 소각에 비해 다이옥신이나 퓨란과 같은 유해한 물질의 배출이 적어 주민의 우려를 완화시킬 수 있다. 본 논문에서는 다양한 유해폐기물의 종류에 대해 현재 적용이 가능한 소각 대체기술들을 검토하였다. 다양한 범주의 비열처리 및 열처리 소각 대체기술들을 공정운전조건, 적용대상 폐기물 및 이차폐기물 발생특성의 관점에서 평가하고 몇 가지 소각 대체기술들에 대해서는 공정의 운전원리에 대해 자세히 설명하였다.

태양전지 산업(産業)에서 배출(排出)되는 Si waste로부터 SiC 분말 제조에 관한 연구(硏究) (A Study on the Preparation of SiC Nano powder from the Si Waste of Solar Cell Industry)

  • 장은진;김영희;이윤주;김수용;권우택
    • 자원리싸이클링
    • /
    • 제19권5호
    • /
    • pp.44-49
    • /
    • 2010
  • 태양전지산업으로부터 배출되는 Si waste로부터 탄소환원법을 사용하여 SiC 분말을 제조하였다. 태양광 산업의 실리콘 웨이퍼 가공 공정에서 다량의 실리콘 및 오일 포함된 폐액이 발생한다. 환경과 경제적인 측면에서 폐액으로부터 실리콘 성분을 재회수하는 기술의 개발은 매우 중요하다. 본 연구에서는 폐 실리콘를 milling하여 나노화한 후 카본 블랙과 혼합하고 진공분위기에서 $1,350^{\circ}C$로 열처리하여 100 nm크기의 균일한 입도를 갖는 SiC 분말을 제조하였다. 폐실리콘과 생성물의 물리적 특성을 SEM, XRD, 입도분석 그리고 원자 흡수 분광기를 사용하여 분석하였다.

각종 유기성오니의 성상분석에 의한 퇴비화가능성의 검토 (Investigation on Posssiblility of Composting by Properties Analysis of Organic Sludge Composts)

  • 한의정;최훈근;이재안;김규연;이중기;박귀환;배재근
    • 유기물자원화
    • /
    • 제8권1호
    • /
    • pp.109-120
    • /
    • 2000
  • 일반항목의 분석에서는 함수율 및 유기물농도에 있어서 처리장별 업종별로 큰 차이는 없었으며, 유기물함량과 함수량간에 상관관계는 높지 않았다. 중금속항목에 대한 오염기여도를 보면 하 폐수 및 사업장오니의 42건 중 비료관리법의 기준을 초과하는 것은 주로 As, Hg 및 Cr이었으며, As는 42건중 28건(67%), Hg는 21건(50%) 및 Cr은 9건(21%)으로 나타나 다른 항목보다 상대적으로 많이 오염되는 것으로 특성을 파악할 수 있었다. 상기와 같은 분석항목외에 선진국의 일부국가에서 규제하고 있는 기타 중금속 및 유해성 유기화합물 대하여 분석한 결과, Be, Se, Mo등 외국에서 규제하고 있는 농도에 비교해서는 아직까지 낮은 농도로 검출되었으며, 유기화합물 중에 PCBs는 10건 시료평균은 26.2 ppb 였으며 가장 높은 값은 하수처리종말처리사업소 발생한 오니로서 162.6 ppb 이었고, 낮은 곳은 피혁제조업의 하수오니로서 2.14ppb이었다. 각종 슬러지에 의하여 생산되어 유통되고 있는 시료를 수거하여 분석한 결과, 대부분 규제 값을 만족하고 있었으나, 크롬에서 농도에 상회하는 제품이 있었다. 현재의 각종유해물질에 의하여 재자원화에 장해가 되는 오염물질이 다수 관찰된 것으로 앞으로 면밀한 검토를 통하여 용도별 사용이 필요하며, 각종 슬러지의 재활용을 위해서는 규제 값을 상회하는 처리업소에서는 특정성분의 발생억제를 통한오염물의 저감노력도 필요할 것이다.

  • PDF

금속 나노 입자를 이용한 인쇄 회로 기판의 회로 형성 (Formation of electric circuit for printed circuit board using metal nano particles)

  • 정재우
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.545-545
    • /
    • 2007
  • Recently, innovative process has been investigated in order to replace the conventional high-cost micro patterning processes on the electronic products. To produce desirable profit margins from this low cost products, printed circuit board(PCB), will require dramatic changes in the current manufacturing philosophies and processes. Innovative process using metal nano particles replaces the current industry standard of subtractive etched of copper as a highly efficient way to produce robust circuitry on low cost substrates. An advantage of using metal nano particles process in patterned conductive line manufacturing is that the process is additive. Material is only deposited in desired locations, thereby reducing the amount of chemical and material waste. Simply, it just draws on the substrate as glass epoxy or polyimide with metal nano particles. Particles, when their size becomes nano-meter scale, show some specific characteristics such as enhanced reactivity of surface atoms, decrease in melting point, high electric conductivity compared with the bulk. Melting temperature of metal gets low, the metal nano particles could be formated onto polymer substrates and sintered under $300^{\circ}C$, which would be applied in PCB. It can be getting the metal line of excellent electric conductivity.

  • PDF

폐절연유를 이용한 숙련도 평가용 PCBs 표준물질의 적용성 평가 (Estimation on the application of Reference Materials for PCBs Proficiency Testing from the transformer oil)

  • 김우일;권명희;전태완;김동훈;전진원;심기태;연진모
    • 분석과학
    • /
    • 제23권3호
    • /
    • pp.247-254
    • /
    • 2010
  • 본 연구는 폐기물분석전문기관이 신뢰성 있는 분석결과를 얻을 수 있도록 하기위한 폴리 염화바이페닐(PCBs) 정도관리 숙련도 평가용 표준물질을 개발할 목적으로 수행하였으며 다음과 같은 결과를 얻었다. PCBs함유 절연유와 PCBs가 함유되지 않은 절연유(PCB free oil)에 PCBs 표준액을 첨가하여 조제한 표준물질로 PCBs에 대한 숙련도평가용 표준물질을 제조하였다. PCBs 표준액 첨가에 의한 균질화도를 검토한 결과, Arochlor 1254 (6 ppm)과 Arochlor 1254:1260(1:1) (5 ppm)을 첨가한 경우 최대 60일, Arochlor 1260 (3.5 ppm)을 첨가한 경우 최대 90일이 지나야 균질화되는 것을 확인할 수 있었다. 제조된 표준물질을 10회 이상 반복 측정한 결과, PCBs 제조 표준물질은 상대표준편차 3.51~5.01%로 균질성이 있다고 판단되었으며, 일원분산분석법(one way ANOVA)에 따라 균질도를 평가한 결과 모든 시료가 균질하다고 판단되었다. 제조된 표준물질을 무작위로 10개의 선정하여 분석한 결과를 기준값으로 선택하였으며, 측정과정과 균질도에 의한 확장불확도값은 0.26~0.49로 조사되었다.

폐기물 매립지 침출수에 의한 중금속 용출에 관한 연구 (A Study on the Leaching of Heavy Metals by Municipal Solid Waste Landfill Leachate)

  • 정종관;장원;박영숙
    • 환경영향평가
    • /
    • 제6권1호
    • /
    • pp.105-110
    • /
    • 1997
  • Sanitary landfill is a general method as a final disposal of municipal solid waste(MSW), therefore leachate characteristics are very various as lime goes by because of highly concentrated organic acids are contained non biodegradable COD. So it is hard to abide by the mandatory standards of discharge eventhough applying the physicochemical and biological processes to treat the leachate. The process of treating leachate are determined by the degree of removal and components, but they are highly contained organic materials. It is a removal method to use jointly with the physicochemical process if the hard and fast rule is needed. The critical components of material are COD, ammonia, salts and heavy metals in the case of treating biologically. Biological process is to use metabolism of microorganism, therefore it is a desirable condition which heavy metals are not contained, because they acting as an inhibitor of enzyme. Of these are contained, organic decomposition and synthetic function of microorganisms decrease significantly. Consequently, this research paper lays emphasis on the concentration of heavy metals in leachate and for the purpose of forecasting the factors which are affecting the leaching of metalic waste in some degree, experimented the various reacting conditions. 1. When the concentration of heavy metals in leachate is in comparison with the level eluted after reaction, at pH 7.9 the result of reaction for PCB to CCL scrap showed that Zn, Mn, Cu was more eluted 11.6 times, 340.3 times, and 2,705.5 times respectively than the leachate undiluted solution. 2. At the condition of strong acid pH 4.7, the concentration of heavy metals in EM undiluted solution showed that Zn, Mn, Cu was more eluted 26.5 times, 147.3 times, and 3,656.3 times respectively than leachate undiluted solution. 3. When the ratio leachate to EM was 50 vs 50(V/V%), Mn was more eluted 198.7 times than leachate undiluted solution, but Zn and Cu do not show the meaningful results. 4. The color of landfill leachate was black-brown. And fulvic acid that is main ingredient of NBD COD contained, oxygen of 44~50%. For that reason, I estimated that the level of Zn, Mn, Cu was higher than the case of leachate. 5. COD of leachate from general landfill is difficult to remove. Because the solution of heavy metals is improved by the character of leachate(pH & ingredient of oxygen etc.) hence the Mn, Cu, Zn act as disturbing factor, the biochemical treatment is hard. Therefore the type of PCB & CCL scrap, iron, aluminum contained metals need to previously separate from general wastes as much as possible.

  • PDF

폐 PCBs의 미분쇄 공정 적용에 따른 유가금속 분포 특성 및 금속 침출 향상에 관한 연구 (A Study on Improvement of Valuable Metals Leaching and Distribution Characteristics on Waste PCBs(Printed Circuit Boards) by Using Pulverization Process)

  • 한영립;최영익
    • 한국환경과학회지
    • /
    • 제24권2호
    • /
    • pp.245-251
    • /
    • 2015
  • The main objective of this study is to recovery valuable metals with metal particle size distributions in waste cell phone PCBs(Printed Circuit Boards) by means of pulverization and nitric acid process. The particle size classifier also was evaluated by specific metal contents. The PCBs were pulverized by a fine pulverizer. The particle sizes were classified by 5 different sizes which were PcS1(0.2 mm below), PcS2(0.20~0.51 mm), PcS3(0.51~1.09 mm), PcS4(1.09~2.00 mm) and PcS5(2.00 mm above). Non-magnetic metals in the grinding particles were separated by a hand magnetic. And then, Cu, Co and Ni were separated by 3M nitric acid. Particle diameter of PCBs were 0.388~0.402 mm after the fine pulverizer. The sorting coefficient were 0.403~0.481. The highest metal content in PcS1. And the bigger particle diameter, the lower the valuable metals exist. The recovery rate of the valuable metals increases in smaller particle diameter with same leaching conditions. For further work, it could improve to recovery of the valuable metals effectively by means of individual treatment, multistage leaching and different leaching solvents.

국내 부산물 다염화비페닐(PCBs) 배출량 예비 평가 (Preliminary Estimation of National Emission Inventory for the Unintentionally Produced Polychlorinated Biphenyls)

  • 김경미;조규탁;이지윤;이지은;이동수
    • Environmental Analysis Health and Toxicology
    • /
    • 제19권2호
    • /
    • pp.227-233
    • /
    • 2004
  • The main objectives of this study were to identify from literature review the potential sources and to provide a preliminary national emission inventory for the unintentionally produced polychlorinated biphenyls (PCBs) (i.e., by - product PCBs). In Korea, fuel combustion, waste combustion, thermal industrial processes, and transportation were identified as potential sources of by -product PCB s. According to the availability of the emission factors and/or activity data, emission inventory could be assessed only for fuel combustion, waste combustion, steel industry, non-ferrous industry, and non-metallurgical industry. The total national emission of by-product PCBs was estimated to be 1087kg for the year 2000. The preliminary estimation further indicated that the steel manufacturing was the single dominant emission category, contributing 93% to the total emission. Of the steel manufacturing processes, the contribution of the electric arc furnace was about 80% of the total emission. Due to high uncertainty associated with both the emission factors and activity statistics, the emission estimates in this study are likely to contain significant errors. However, the results of the present work could serve the first step toward future efforts to establish national source and emission inventories of by-product PCBs.