• 한국재료학회지
• /
• 제10권6호
• /
• pp.445-449
• /
• 2000

가압 경수형 원자로 (pressurized light water reactor) 냉각재 계통 내의 주된 분식 생성물로 알려져 있는 nickel ferrite의 거동에 대해 고찰하기 위해 모의 nickel ferrite($Ni_{0.75}Fe_{2.25}O_4$)를 공침법으로 제조하였다. 수용액-pH-조절로는 am-monia 또는 potassium carbonate를, 공침물-세척제는 ammonia 수용액이나 potassium carbonate 수용액 또는 2차 증류수를 사용하였다. Nickel ferrite의 생성 및 수용액-pH-조절제와 공치물-세척제가 최종 생성물의 Ni-Fe 몰 비에 따른 수율 및 특성에 미치는 영향은 EDX, XPS, XRD 및 SEM으로 고찰하였다. 반응 전.후 Ni/Fe 몰 비에 따른 수율은, pH를 potassium carbon-ate로 조절한 후 2차 증류수로 공침물을 세척한 경우가 0.994로 가장 높이 나왔으며, pH-조절제로 potassium carbonate를 사용한 경우가 ammonia를 사용한 경우에 비해 높은 수율을 나타냈다. 이러한 차이는 공침 시에 수용액 내에서 ammonia가 보여주는 상대적으로 큰 $Na_{2+}{\leftarrow}NH_3$ 착화 효과와 더불어 공침물-세척제의 pH에 기인하는 것으로 해석하였다.

• 융합정보논문지
• /
• 제11권5호
• /
• pp.206-214
• /
• 2021

본 연구는 인삼저온숙성비누의 세안효과를 연구하기 위하여 진행하였다. 피부상태에 영향을 줄 수 있는 외부적 환경인자를 배제하기 위하여 동일한 환경에서 동일한 물과 타월을 사용하였으며, 세안 전과 세안 직후 10분의 피부변화를 조사하였다. 대조군으로는 세안제를 사용하지 않고 물세안만 한 경우와 시중에서 일반적으로 사용되고 있는 폼클렌저 타입의 세안제를 사용한 경우를 설정하였다. 물세안, F/C세안, 인삼cp비누 세안의 세 가지 케이스를 비교 분석하였으며 물세안의 경우 모공과 색소침착을 유의성있게 감소시켰으나 F/C세안과 인삼cp비누에 비하여는 유의성이 크지는 않았다. F/C세안의 경우 모공과 색소침착을 유의성이 크게 감소시켰으나 세안 후 급격한 수분감소가 나타났다. 인삼cp비누를 이용한 세안의 경우 모공과 색소침착을 유의성 크게 감소시키면서도 수분의 손실은 크게 나타나지 않았다. 그러므로 인삼cp비누는 피부관리를 함에 있어서 가장 적합한 세안제의 형태라고 사료된다.

• 멤브레인
• /
• 제25권2호
• /
• pp.180-190
• /
• 2015

강도가 강하고 내약품성, 무독성, 내연소성 등의 장점을 가지고 있는 PVDF (polyvinylidene fluoride) 나노섬유로 기공이 각각 0.3, $0.4{\mu}m$ 평막을 제조한 후, 그 평막으로 나권형 모듈을 각각 제작하였다. 그중 $0.3{\mu}m$ 모듈은 제조 시 부직포를 포함하지 않았고, 기공이 $0.4{\mu}m$ 모듈은 제조 시 부직포를 포함하였다. 카올린과 휴믹산으로 조제한 모사용액과 순수를 대상으로 두 모듈의 투과선속와 제거율을 비교하였고, 물 역세척을 실시한 후 회복률과 여과저항을 계산하였다. 또한, 기공이 $0.4{\mu}m$인 나권형 모듈을 사용하여 유량과 막간압력차가 처리율과 여과저항에 미치는 영향을 고찰하였다.

• 환경위생공학
• /
• 제23권2호
• /
• pp.55-63
• /
• 2008

All over the world, the existing process of water purification needs more flocculants and chlorine due to a gradual decline in the quality of source water. Therefore, the problem of the remaining aluminium and DBPs in purified water is on the rise. To solve this problem, the process of membrane filter has recently come into the spotight. This study reaches the following conclusions concerning TMP variation in order to solve the dropping of flux throgh a membrane filter when operating a membrane filter system in the process of water purification. 1. In case that a cohesion-precipitation process was introduced to pre-treatment of a membrane filter, initial TMP was very satisfactory(0.27kg/cm) in producing the constantly safe quality of water, $0.04{\sim}0.1$(mean 0.05) NTU by pouring 2mg/l of PACI(10% $Al_2O_3$) used for the existing process of water purification in high-density turbidity at a dry or flood season and at occurrence of high algae. 2. As flux increased at 0.5m/day.m, TMP increased 0.05 kgf/cm. 3. As filtering, operation mode of PVDF MF membrane filtering was 48 minutes and 1 cycle of back washing was 42 minutes, flux was increased 1.5m/day.m and TMP increased $0.25{\sim}0.27kgf/cm$. Without back washing, TMP increased 0.03 kgf/cm per a cycle.

• 한국의류학회지
• /
• 제18권1호
• /
• pp.23-30
• /
• 1994

The objective of this study was to analyze the effect of the dissolution of detergent on washing and rinsing efficiency, and the possibility of saving detergent in washing. Washing and rinsing efficiency were reviewed in three different ways : A method was to input dissolved detergent by the use of rapid detergent dissolution instrument, B method was to input dissolved detergent beforehand, and C method was to input undissolved detergent. The results were as follows 1. A method > B method > C method was shown in detergency with washing time and three method's gaps were reduced because detergent dissolution effect was reduced by mechanical action in proportion of washing time. Especially, according to detergency of A method of 0.07% and C method of 0.1% was appeared approximately, saving detergent was expected by rapid dissolution of detergent. 2. A method > B method > C method was shown in detergency with washing temperature. As the washing temperature rose, the detergent reached chemically more activated state and become easily soluble. It resulted for the detergent to penetrate and adhere to laundry easily. 3. A method > B method > C method was shown in detergency with detergent concentration and C method was more sensitive than A, B method against change of detergent cocentration. Rapid detergent dissolution made it possible not only to enhance the washing efficiency but also to save the detergent because detergency of A method in low concentration is higher than that of C method. 4. A method $\geq$ B method > C method was shown in rinsing ratio with detergent input method. It indicated input dissolved detergent was advantageous in rinsing. 5. The result of anion surfactant concentration test of each process with detergent input method was shown like that A method In B method > C method in washing and reverse result was shown in rinsing. The anion surfactant concentration of C method was low during washing but high during rinsing. This was identical with previous results which shown the washing and rinsing efficiency improved with dissolved detergent usasge. 6. C method > B method > A method was shown in the degree of remaining detergent after rinsing. There was no remaining detergent after second rinsing in A and B method, but in C method four rinsings were required for the same result. Consequently, in A and B methods, less water and electricity were used, and less abrasion of cloth.

• 한국식품저장유통학회지
• /
• 제30권3호
• /
• pp.472-482
• /
• 2023

본 연구는 쌀의 세척 및 취반 방법에 따른 isoprothiolane 잔류량을 GC-µECD를 이용하여 분석하였다. 세척 전 현미 잔류량은 17.03 mg/kg이었으며, 도정 후 백미는 1.67 mg/kg이었다. 세척 방법에서 물의 비율과 세척 횟수에 따라 현미와 백미의 isoprothiolane 잔류량은 19.3-59.3 및 43.1-66.5%이었으며, 세척물 온도가 5-40℃ 증가할수록 현미는 56.6-63.1%, 백미는 67.1-74.9% 감소하였다. 세척 방법을 손으로 살살 휘젓거나 비비는 방법으로(A, B 및 C)로 달리하였을 때 현미의 농약 감소율은 63.1-71.6%, 백미는 75.4-87.4%이었다. 현미를 압력밥솥과 전기밥솥을 이용하여 즉시 취반하였을 때 농약은 78.4 및 78.5%, 백미의 경우 94.0 및 94.0%로 감소하였으며, 30분간 불린 후 취반하였을 때 잔류농약은 현미에서 83.4%, 백미는 95.8% 감소하였다. 따라서 현미와 백미의 잔류농약 감소를 위한 가장 효과적인 세척 및 취반 방법은 40℃ 물, 7배 물로 6회 (2, 3회 차는 손으로 비벼서 세척) 세척 후 30분간 물에 불리기이다. 밥솥의 종류에 관계없이 취반할 경우 현미는 평균 83.4%, 백미는 95.8% isoprothiolane이 효과적으로 제거되는 것을 확인하였다.

• 한국토양환경학회지
• /
• 제3권3호
• /
• pp.109-116
• /
• 1998

본 연구에서는 유류 오염토양 복원을 위한 효율적인 세척 공정과 장비를 구성하여 현장 적용 가능성을 검토하였다 토양세척 장비는 co-current식 전세척장치와 counter-current식 세척조로 구성된다. 토양 이송 및 부분 세척이 이루어지는 전세척장치를 통과한 토양과 물은 세척용액이 첨가되는 세척조로 유입되며, 적정 운전 조건하에서 내벽에 부착된 나선형 웨어에 의해 일정 입경을 기준으로 토양이 분리되며, 동시에 각 웨어 사이에 부착된 임펠러의 교반력에 의해 토양내 오염물질이 탈착된다. 실험 결과, 전세척장치는 토양주입량 1 kg/min, 진탕비 1, 회전속도 50 rpm에서 최대 세척효율 83.6%(#4-)을 보였으며 세척조에서는 토양.물 주입위치 15 cm, 회전속도 5 rpm, 경사각 $6^{\circ}$, 세척용액 주입유량 0.8 L/min일 때 최대 세척효율인 97.9% (#4-)를 나타내었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권1호
• /
• pp.28-35
• /
• 2015

In this study, the mechanisms on ultrasonication enhanced metals extraction were investigated compared with the conventional washing technique. We hypothesized the mechanisms on enhanced extraction of ultrasonication: ultrasonication increased the temperature of soil slurry and decreased average particle size of soil due to breakdown of soil aggregate. Actually, the ultrasonication increased the temperature of soil slurry to $60^{\circ}C$ in this study, and the increase in the temperature enhanced the metal extraction to 15-20% even in the conventional simple mixing. The conventional washing technique decreased average size of soil particles because of breakdown of soil aggregate, and the ultrasonication decreased the size more than that of washing. The breakdown of soil aggregate improved the contact between metals and washing agent, which enhanced the extraction of metals in the ultrasonication. Therefore, we concluded that the main mechanisms of ultrasonication are increase in the temperature and breakdown of the soil aggregate. Finally, the ultrasonicaiton increased the extractability of metals upto 40% compared to conventional washing technique.

• 한국정밀공학회지
• /
• 제23권8호
• /
• pp.154-162
• /
• 2006

By laying its drum horizontally, front-loaded washing machine mostly used in Europe that uses the head of the water to launder was appropriate for washing only small amount of laundry. However, the demands of customers are requiring front-loaded washing machine to handle big capacity laundry as well, and have faster rotation speed to increase drying ability. To meet such demands, more stress from bending and twisting are complexly loaded onto the shaft supporting the horizontal drum, causing problems in fracture strength and fatigue life. Shafting system is mainly divided into flange and shaft. Flange is located between the drum and shaft, transferring power from the shaft to drum, and acting as a supporter of the back of the drum. Shaft is connected from the flange to insert production, transferring power from the motor to drum, and mainly acting as stiffness against the horizontal weight of the shafting system. In this paper, strength analysis and experiment were executed on both the shaft and flange of front-loaded washing machine to suggest the design improvement of shafting system for big capacity, high-rotation drying. Also, verification of this evaluation was executed on fracture strength and fatigue life for studied shaft system.

• 한국토양비료학회지
• /
• 제50권6호
• /
• pp.615-622
• /
• 2017

This study was conducted to evaluate the odor reduction efficacy of the dip injection wet scrubber (DIWS) using tap water as washing fluid. The $NH_3$ and $H_2S$ removal efficiency of 7 day batch operated DIWS was evaluated twice over a total of 14 days of experiment. The $NH_3$ removal efficiency ranged from 26 to 37%. The $H_2S$ removal efficiency was between 22 and 30%. The pH of the washing fluid maintained below 8 and the $NH_4{^+}$ concentration tended to keep constant around 350 ppm after 5 days of washing-fluid replacement. Therefore, the 5-day washing fluid replacement interval is more preferable than the 7-day interval. The $NH_4{^+}$ concentration and the electrical conductivity (EC) showed a high correlation. The EC measurement can be used as an alternative to conventional $NH_4{^+}$ concentration measurement method for real time monitoring of washing fluid condition.