• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.250-257
• /
• 2021

Laundry industry has traditionally been considered an industry that generates large amounts of wastewater and Volatile Organic Compounds(VOCs). This is still the case until now. Household laundry detergents are produced and distributed within the safety regulations on the amount of harmful substances detected. While industrial laundry detergents are often distributed without safety regulations, and even laundry workers manufacture and use them on their own. This contaminates water and air and also threatens the safety of workers. This study is a basic study for distributing eco-friendly detergents(EFD-A) developed through previous studies to the laundry industry. Safety, washability and wastewater quality of EFD-A are evaluated. Three existing commercial detergents(PD1, PD2, LD4) are also evaluated to compare with EFD-A. The safety of detergents is confirmed by the content of optical brightener, VOCs, and arsenic. Washability is evaluated by the difference in reflectance of washed and unwashed artificial soiled fabrics according to detergent concentration, washing temperature, and washing time. TOC is used as the index of assessing the wastewater quality. The results are as follows; EFD-A doesn't contain the optical brighteners, VOCs, and arsenic. The optimal washing conditions for EFD-A are 3 g/L concentration, 40 ℃ washing temperature, and 30 min washing time. The soil removal efficiency is about 71 %, which was similar to or somewhat superior to that of PD1, PD2, and LD4. TOC is 63.5 %, which is about 15 % lower than the discharge limit. Through this study, the developed detergent EFD-A can be used as a safe and eco-friendly detergent for the human body and the environment.

• 한국잠사곤충학회지
• /
• 제23권1호
• /
• pp.47-55
• /
• 1981

絹織物加工을 實需要者의 利用度를 增加시키기 爲해 多年間 여러 사람에 의하여 硏究되어 왔으나 天然織維이기 때문에 加工方式으로 性質을 變化시키기는 어려워서 滿足스러운 精度로 이루어지지 못하고 있는 實情에 있다. 絹織物加工은 勿論 그 缺點을 補强하는 同時에 商品的價値도 向上시키는데 目的이 있는데 때로는 有名商標가 品質以上으로 販賣를 左右하는 例도 많다. 特히 絹制品은 歡迎을 받지 못하고 있는 實情에 있다. 이러한 問題點을 解決하기 爲해 筆者는 多年間 硏究를 持績하여 왔든바 一般絹織物의 浸潤後 乾燥時間보다 半減된 時間에 乾燥되는 所謂 Wash and Wear絹加工方法의 開發을 하기에 이르렀다. 그리고 그 加工費用이 極히 經濟性인 탓으로 아무런 부담감 없이 加工處理할 수 있는 特徵을 갖이고 있었다. 1. 繭絲는 吐絲營繭曲線이 S字型으로 되어 있어 浸潤時에는 原狀復舊의 性質이 있어 屈曲狀態를 이룩하게 되어 本加工絹織物이 Wash and Wear이기는 하나 가벼운 다림질이 必要하였다. 2. 이러한 加工은 絹絲蛋白質의 變性을 加工過程에서 1% D.I.S.溶液에 3時間 處理하여 變性誘發시킴으로서 可能하였다. 3. 加工絹의 防皺度, 剛乾度를 洗濯回數를 反復하면서 調査하여 본 結果 未處理絹보다 惡化되지 않았다. 4. 未加工絹도 水洗, 乾燥를 反復하게되면 스스로 變性되는 事實을 알았다. 5. 處理絹과 未處理絹의 强力伸度面의 差異가 없었다.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.87-91
• /
• 2008

It is commonly known that water repellency of the fabric treated with fluorocarbon resin brings about a decrease by the washing and recovers by the subsequent heat treatment. In this article, effect of the water repellency was investigated on the nylon 6, triacetate and silk fabrics treated with hydrocarbon and silicon resins. Hydrocarbon and silicon resins have been widely used in the textile finishing as the softening and water proofing agents. The fabrics were treated with hydrocarbon resins, Paragium JQ and RC (Ohara Paragium Chemical Co.) and a silicon resin, Poron MR (Shinetsu Chemical Co.), and then washed and subsequently heat treated. Although the water repellency increased by the resin treatment, it decreased by the washing apparently and recovered a little by the heat treatment. The effect of the heat treatment was small comparing with that of the fluorocarbon resin. Furthermore, as a mechanical property of the treated fabric, KES shearing and bending hysteresis parameters, modulus and hysteresis width of the hydrocarbon resin-treated nylon 6, triacetate and silk fabrics decreased by the heat treatment after washing. Therefore, the treatment is effective at improving the softening of the fabric in water repellent finish.

• 한국염색가공학회지
• /
• 제23권4호
• /
• pp.257-262
• /
• 2011

The dish cloth requires antimicrobial activity for hygienic purpose. Until now, organic antimicrobial agents of low cost have been frequently used for the anitimicrobial finishing. However, a cleaner hving anitimicroial activity should be more durable considering consumers' ever-increasing expectation. In this study, the cleaner containing the bamboo fiber were finished with a formulation of a new zirconium-containing inorganic agent of zirconium phosphate and polyurethane binders. The optimum treatment condition was investigated. And its durability against repeated laundering cycles was assessed. The existence of Zr after the repeated laundering was verified and the antimicrobial effect did not decrease under 30 washing cycles.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.264-271
• /
• 2010

The purpose of this study was to investigate performance evaluation of absorbing and fast-drying fabric after washing. In the comparison of absorption and fast-drying properties, there was slight difference among the materials depending on thickness, weight, and fabric structure. Absorption speed of the materials depended on the frequency of washing which might be caused by modification of fabric structure or composition fiber due to friction during washing. The ability of fast-drying of the materials was gradually decreased with the increase of washing frequency, which might be caused by fatigue accumulation on inner fiber and structural change or destruction with friction during washing.

• 한국염색가공학회지
• /
• 제21권4호
• /
• pp.46-56
• /
• 2009

In order to establish the standard manufacturing condition of PET flame retardant sheets, physicochetnical properties of the samples made by the conventional flame-retardant finishing were systematically investigated, including compatibility among flame retardant agent and finishing auxiliaries, surface property, and wicking property. From this results, the addition of washing and renapping process after the shearing process was required for the more effective in producing PET flame-retardant sheet by the standard finishing. The effect of the modification of the regular flame retardant finishing process was studied by FTIR, TGA, and flame retardancy test.

• 한국염색가공학회지
• /
• 제18권6호
• /
• pp.69-79
• /
• 2006

The washing characteristics of steam jet heating process have been compared with other washing processes, such as low temperature process(standard process, below $40^{\circ}C$) and high temperature process(boiling process, up to $95^{\circ}C$) with the standard soil fabric, EPMA 105. Steam jet heating process showed almost the same washing efficiency as high maximum temperature process for pig's blood and wine. This result can be explained with the higher surface temperature of washing materials in steam jet process compared with direct boiling process. In terms of the energy and water consumption, the steam jet washing process showed significant savings compared with direct boiling type washing process.

• 한국염색가공학회지
• /
• 제18권3호
• /
• pp.23-30
• /
• 2006

The bending properties, wrinkle resistance, and fabric retention behaviors of cotton knitted fabrics in the wale and course directions were studied for their dependence upon resin finishing, knit structure, and washing cycles. Stiffness, wrinkle recovery angles, and dimensional stability were investigated before and after resin finishing and laundering. It has been found that any change in the physical properties of the knitted fabrics with respect to knit structure and fabric directions are related to accompanying modifications to the state of the fiber properties. The decrease of fabric shrinkage rates and wrinkle recovery properties from increasing laundering cycles is related with resin incorporated on the fiber surface. This study shows that resin finishing on knitted fabrics can be performed only to improve fabric retention properties with reduced wrinkle recovery properties.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2004년도 춘계학술발표회 논문집
• /
• pp.199-203
• /
• 2004

The azo red pigments for textile printing containing amino-N-substituted benzamide derivatives as diazo components and 2-hydroxy-3-naphthoyl derivatives as coupling components were prepared. They have been printed on cotton, and the fastness, such as light, washing, dry cleaning, rubbing and heat stability was estimated. The new azo red pigments were valuable colorants in case of textile printing.

• 한국염색가공학회지
• /
• 제24권3호
• /
• pp.173-179
• /
• 2012

Silk fabric treated with fluorocarbon resins (Asahi Guard AG-7005 and AG-E061) were washed and subsequently heat treated varying the washing cycles and the temperature. After the processing, the water and oil repellencies, and contact angle to water were evaluated. The water and oil repellencies decreased by the washing and recovered by following heat treatment. Also ESCA measurement was carried out to investigate the surface chemical composition of the treated fiber. The $F_1s$ intensity of the treated fabric decreased by the washing and recovered by the subsequent heat treatment. On the other hand, the $O_1s$ intensity increased by the washing and decreased by following heat treatment. From the results, it is clear that change of the water and oil repellencies of the silk fabric treated with fluorocarbon resin occurred by the washing and subsequent heat treatment. Considering a change of the water repellency of the silk fabric treated with fluorocarbon resin, it seems likely that the fluoroalkyl group of the fluorocarbon resin rotates from surface to inside of the fiber by the washing to adapt to the hydrophilic circumstance, and the orientation of the fluoroalkyl groups of the resin disturbed by the washing recovers the orientation to the fiber surface after the subsequent heat treatment.