• Environmental Engineering Research
• /
• 제21권3호
• /
• pp.304-310
• /
• 2016

Removal of arsenic (As) from soil aggregates with particle sizes of > 2.0, 2.0-0.25, 0.25-0.053, < 0.053 mm by soil washing of $KH_2PO_4$ and the kinetics of As releasing from soil aggregates were investigated. Effects of $KH_2PO_4$ concentration, ratio of liquid/soil and washing duration on the removal were fully explored. The results showed that the high As removal was obtained in > 2 mm aggregates (48.56%) and < 0.053 mm aggregates (42.88%) under the optimum condition ($KH_2PO_4$ concentration of 0.1 mol/L, and liquid/soil ratio (10 mL/g) for 360 min). 62.82% of As was extracted from aggregates with size less than 0.25 mm. Only 11.88% was contributed by the large aggregates (> 2.0mm). Using $KH_2PO_4$ washing, it was also found that extracted As is mainly in form of either specifically sorbed As or As associated with oxides of Fe and Al. Elovich model can describe the removal process of As more precisely than Two-constant kinetic models. The optimum washing conditions and removal process is also applied to bulk soil. This technique in this study is reliable, cost-effective and offers a great potential for practical application in soil remediation.

• 한국식품과학회지
• /
• 제22권7호
• /
• pp.780-785
• /
• 1990

유채박 단백질의 효과적인 추출 및 정제공정을 확립하기 위하여 추출용매를 비교했으며, 1% SHMP 용매로 추출한 후 등전침전, 산세척, UF농축 처리에 의하여 정제한 단백질의 수율 및 glucosinolate와 phytate 잔존량을 조사하였다. 추출조건은 1% SHMP(pH 8.0) 용매가 가장 적당하였으며, glucosinolate 및 phytate 제거를 위한 정제효과 면에서는 2회 산세척시와 1회 산세척 및 UF(100K) 농축 처리한 공정이 가장 효과적 이었다. 수율과 단백질 함량은 2회 산세척의 경우는 37.1% 및 75.3%이었으며, 1회 산세척과 UF(100K) 농축의 경우는 42.1% 및 72.4%였다. 따라서 glucosinolate와 phytate 제거효과와 단백질의 수율면을 고려한 결과 가장 효과적인 정제공정은 등전침전${\rightarrow}$1회 산세척(pH 3.5)${\rightarrow}$중화(pH 7.5)${\rightarrow}$ UF(100K) 농축 처리하는 방법이다.

• 한국의류학회지
• /
• 제29권12호
• /
• pp.1619-1626
• /
• 2005

탄성직물의 내구성은 탄성직물에 포함된 스판덱스사의 성질변화가 큰 영향을 미친다. 그러므로 본 연구에서는 세탁조건이 스판덱스사의 길이, 강도와 신도, $300\%$신장 후의 영구탄성 변화에 미치는 영향을 조사하였다. 시료로는 굵기가 다른 스판덱스사와 heat-set 시 신장률이 다른 편성물을 가정용 드림세탁기에서 세탁온도, 세탁 전 침지시간과 세탁휫수를 달리하여 세탁한 후, 편성물로부터 스판덱스사를 분리하여 기계적 성질을 측정하였다 스판덱스사의 길이는 세탁온도가 높아지거나, $40\%$에서 세탁휫수가 증가하면 계속 감소하였으나 세탁 전 침지시간에 따른 영향은 비교적 적었다 섬유가 가늘수록 길이 수축률이 크며 세척 조건변화에 따른 수축률이 크게 증가하였다. 스판덱스사의 강도와 신도는 반복 세척 시의 감소가 뚜렷하였으며, heat-set 시에는 강도와 신도도 크게 감소하였고, heat-set 시에 가해준 신장률이 클수록 감소가 더 컸다. 한편 스판덱스사의 영구변형률은 세탁온도가 높으며, 침지시간이 길고, 세탁횟수가 많을 때 현저히 높았다. 대체적으로 굵은 스판덱스사의 영구변형률이 크며, 140D는 30회 세척 후에 $28.0\%$의 영구변형 이 일어났다. Heat-set로 스판덱스사의 영구변형은 늘어나며, heat-set 시에 신장률이 큰 스판덱스사의 영구변형이 더 많았다. DSC 열분석 곡선에서 스판덱스 섬유는 반복 세탁과 heat-set여부와 관계없이 동일한 융해온도를 나타내었으며, 이로부터 스판덱스 섬유의 hard segment분자쇄 길이는 세탁 또는 heat-set후에도 변화가 없는 것으로 보여진다.

• 한국수정란이식학회지
• /
• 제11권3호
• /
• pp.309-316
• /
• 1996

The aim of this study is to elucidate sperm chemotaxis and to set up the optirnal condition for selection of motile and capacitated sperm from hovine frozen-semen. Thus, the effects of semen-washing after thawing, concentrations of progesterone (P4) and bovine serum albumin (BSA), and sperm-washing frequency on sperm selection were examined. For evaluating their effects, number, viability and acrosome reaction of sperm swim-up seperated from semen, which were incubated for 30 minutes at 36$^{\circ}C$ in the M2 solution containing P4 and BSA, were investigated. For frozen-semen just after thawing, sperm recovery and viability were not significantly different between P4-treated and -untreated semen. However, washing frozen-semen decreased the number of sperm and increased the viability of sperm that were recovered from semen treated with P4. Progesterone affected the recovery rate, the viability and the acrosome-reaction rate of sperm recovered from washed frozen-semen. Especially, number of motile and capacitated sperm were highest in semen treated with 50$\mu$g /ml among 0, 20, 50 and 100$\mu$g /ml of P4 concentrations. BSA affected the recovery rate and the viability of sperm recovered from washed frozen-semen that were treated with 50$\mu$g /ml of P4. Especially, the percentage of viable sperm were highest in semen treated with 4mg /ml among 0, 2, 4, and 6mg /ml of BSA concentrations. Repeatedly sperm-washing did not affect the recovery rate and the viability of sperm recovered from washed frozen-semen that were treated with 50$\mu$g /ml of P4 and 4mg /ml of BSA In conclusion, using progesterone and BSA could efficiently make the selection of motile and capacitated sperm from washed frozen-semen.

• 한국산업보건학회지
• /
• 제27권2호
• /
• pp.115-122
• /
• 2017

Objectives: This study was designed to evaluate the changes in the particle filtration efficiencies of five cloth masks (4 plate types, 1 cup type) with an increasing number of machine washings and the degree of cloth expansion. Methods: NaCl aerosols were generated using an atomizer and passed through cloth masks in a dynamic aerosol chamber. Particle concentrations were measured both before and after for the cloth masks using an optical particle counter (OPC) in the size range of $0.3{\sim}10{\mu}m$. Results: In the original condition, the filtration efficiencies of the five cloth masks were A: 20.1%, B:30.9%, C: 25.0%, D: 26.5%, and E: 40.9%. As the number of washings increased in the order of one, two, and four times, the filtration efficiencies of cloth mask C increased. The filtration efficiency of A, D, and E increased after the first washing. With the exception of B, the filtration efficiency of cloth masks increased after the second washing and those of all cloth masks increased after the fourth washing. This might be caused by the fibers untangling from the yarn and being freed at one end. In this status, the packing density of the textile will not change, but the distances between fibers will increase, which might bring about an increase in filtration efficiency. When the cloth masks were extended by 10% and 20% in one direction, the filtration efficiencies of cloth masks B, D, and E decreased at 10% extension, and those of all cloth masks decreased at 20% extension. When the cloth masks were expanded by 10% and 20% in two directions, the filtration efficiencies of all cloth masks decreased by at least 34.7% at 10% extension, and by at least 60.9% at 20% extension Conclusions: The filtration efficiency of cloth masks could decrease after one to two machine washings, but will increase after four washings in comparison with their original performances. The filtration efficiency of cloth masks will decrease when they are expanded, such as when stretching over the nose during wearing status.

• 한국콘텐츠학회논문지
• /
• 제12권1호
• /
• pp.409-415
• /
• 2012

본 연구의 목적은 방사선사의 병원감염관리 중 손 씻기 관리와 개인위생관리에 관한 인식도와 실천도를 조사하여 병원감염예방에 대한 실태를 조사하기 위해 실시 되었다. 그 결과로는 방사선사의 손 씻기 관리의 인식도와 실천도는 5점 만점을 기준으로 4.378, 4.199 이었고, 개인위생관리의 인식도와 실천도는 5점 만점을 기준으로 4.284, 3.990 이었다. 또한 손 씻기 관리의 인식도에서 일반적 특성 중 성별, 연령, 학력, 근무경력이 유의한 차이가 있었으며, 실천도에서는 성별, 결혼여부가 유의한 차이가 있었다. 개인위생관리의 인식도에서 일반적 특성 중 연령, 학력, 근무경력이 유의한 차이가 있었으며, 실천도에서는 결혼여부, 근무경력이 유의한 차이가 있었다. 마지막으로, 손 씻기 관리와 개인위생관리의 인식도와 실천도의 상관관계는 손씻기 관리 r=0.453, 개인위생관리 r=0.415로 인식도가 높을수록 실천도가 높게 나타났다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제10권1호
• /
• pp.58-64
• /
• 2005

본 연구는 플럭 형성 비소 오염토양에 대한 토양세척기법 적용시 최적의 운전조건을 도출하고자 하였으며, 대상 시료는 D 폐철광산 토양을 선정하였다. 최적의 cut-off size는 전체 토양 중량에 대하여 약 $94\%$ 정도의 분포를 보이는 0.15 mm ($\#100$체)이었다. 수산화나트륨과 염산 모두 비소 제거에 효과적이었고, 진탕비 (토양[g]:세척용액[mL])는 2가지 세척제에 대하여 1:5가 최적 조건임을 알 수 있었다. 토양세척시 형성되는 플럭에 대하여 비소 농도를 파악한 결과, 여타 pH조건에서보다 pH $5\~6$에서 형성된 플럭의 건조 비소 농도가 $990\~1,086\;mg/kg$ dry solids로 높음을 알 수 있었다. 따라서, 세척효율의 향상 여부를 파악하기 위하여 토양세척시 형성되는 플럭의 제거 유무에 따른 연속 토양세척 실험을 수행하였다. 0.2 M염산을 사용하여 플럭을 제거한 토양을 염산 1 M로 세척한 다음 1 M 수산화나트륨으로 연속 세척한 결과, 비소 농도는 약 1.5 mg/kg dry soil을 보였다. 각 단계마다 발생된 세척유출수기 비소 농도는 약 $2\~3\;mg/L$이었으나, 각각의 세척유출수를 혼합하는 경우 비소 농도가 $50\;{\mu}g/L$ 이하로 감소되었는제 이는 비소가 응집${\cdot}$침전으로 제거되는데 유리한 pH조건으로 변환되기 때문인 것으로 판단된다.

• 한국의류산업학회지
• /
• 제2권3호
• /
• pp.220-226
• /
• 2000

This study was to determine the characteristics of vapor-permeable waterproof finished fabric by the coating method. 4 different kinds of coating fabrics (A : wet, porous, polyurethane, B : dry, no porous, polyurethane, C : shape memory polyurethane and D : dry, porous polyurethane) were used, which were developed recently With this sample, moisture transport rate ($40^{\circ}C$, 45%RH & $40^{\circ}C$, 95%RH), changes of coating side's shape by washing times, water repellency rate, contracted length, qmax, heat conductivity, heat keeping rate, heat keeping rate with cotton, heat keeping rate on humidity temperature and humidity within clothing etc. were checked. And it was done in a climate chamber under $20{\pm}2^{\circ}C$, $65{\pm}5%RH$. The results of this study were as follow; In the moisture vapor transmission of sample B and C increased on high temperature and high humidity while sample A and D decreased, on this condition. Qmax rate had high relation with ground fabric's surface properties and the order was A>C>D>B. Heat conductivity had high relation with thickness and surface properties. Heat keeping rates on sweat condition showed around half percents of heat keeping rates on normal condition, but had no relation with moisture vapor transport rate. Changes of the fabric's properties by washing times were different in accordance with the construction of fabrics and the coating resin. Sample C had tow heat keeping rate on the high temperature and humidity and high heat keeping rate on the low temperature and humidity Moisture transport rate of vapor-permeable waterproof finished fabrics had high relation with the properties of ground fabrics on low humidity condition, but on the high humidity condition, it was highly related with the properties of coating resin.

• 대한가정학회지
• /
• 제11권3호
• /
• pp.276-284
• /
• 1973

An experiment, aimed at finding out the adhesive condition when adhesive non-woven fabrics for padding cloths are used for padding cloths of blouse, has been conducted. Materials used were three different kinds-scoured, sanforized, and permanent pressed- of combined fabrics of polyester and cotton. As for padding cloth material, mixed spinning nonwoven fabrics of polyster and viscose rayon have been used. Adhesive conditions were made each at $120^{\circ}C$, $140^{\circ}C$, $160^{\circ}C$ and $180^{\circ}C$, respectively, and adhesive time has been limited to 5, 10, 20, 30, 40 seconds each. External appearance as well as quality have been watched through washing experiment. In case of 12$0^{\circ}C$, all experimental materials were separated at the seventh washing and as for $140^{\circ}C$, all but the material which has been attached on scoured cloth for 40 seconds were separated. In case of 20 seconds only permanent pressed cloth and sanforized cloth were separated. At 30 and 40 seconds, the adhesive conditions have been maintained up to the seventh washing. In case of 5 seconds $180^{\circ}C$it was not turned yellow, but all were separated. In case of 10, 20, 30 and 40 seconds, at above temperature all were turned yellow in the adhesive process. Therefore, the adhesive power could be said strong enough, though it was not very practical. In this experiment, the lower the temperature of iron is, the longer time it has to be touched. At higher temperature however, relatively short time makesn it possible for adhesion and depending upon the finishing methode of cloth, there is slight difference in adhesive power. As a result, the best adhesive condition for all experimental materials is $160^{\circ}C$of iron temperature, and the time of adhesion is between 30 and 40 seconds.

• 한국염색가공학회지
• /
• 제15권6호
• /
• pp.1-7
• /
• 2003

Polyester microfiber has usually greater dye uptake than normal denier polyester fiber in same dyeing condition. In spite of this high dye uptake dyed microfiber fabric has not only low visual colour depth but also poor washing fastness property. In order to study high colouring dyeing technology and high washing fastness of polyester microfiber, dyeing property of polyester microfiber was investigated according to the dye solubility and particle size of used disperse dyes in aqueous dye solution. After disperse dyeing, dyed fabric with disperse dye was redyed with a vat dye without reduction clearing in order to obtain a high washing fastness property. The result were as followings ; A small particle sized disperse dyes such as C. I. Disperse Blue 56 and Red 60 showed high rate of initial exhaution compared with a large particle sized disperse dyes like C. I. Disperse Blue 165 and Red 343. In study of dyeing property of polyester microfiber with C. I. Vat Blue 1, polyester microfiber could achieve high dye uptake at a given optimum vatting process conditions. On the other hand, in consecutive dyeing with disperse and vat dye, K/S value of polyester microfiber with a small particle sized disperse dye increased without reduction clearings, but K/S value of polyester microfiber with a large particle sized disperse dye decreased with reduction clearings.