• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 추계학술대회 학술발표 논문집
• /
• pp.335-339
• /
• 2000

In the weaving process, tension control of the warp is important. The variation of the warp tension cause irregularities of the weft density and low quality of the woven fabrics. Due to the fact that the warp tension varies in depending on the difference between take-up velocity and let-off velocity, it is necessary to regulate the velocity of let-off in relation to that of take-up for keeping the warp tension. Futhermore, the diameter of warp beam changes in the weaving process. The changing diameter of warp beam cause changing inertia of warp beam and the velocity of the let-off. It makes the control of such a system more complex. In this paper, we propose a fuzzy controller for the warp tension control. From the computer simulation, it was observed that a developed fuzzy controller has a better performance than that of conventional PI controller.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.280-283
• /
• 2002

In the manufacturing of large scale composite structures, the cost-effective processing and the enhancement of structural performance are critical. One of the most effective ways for this purpose is to use stitched multiaxial warp knitted (MWK) perform in the resin transfer molding process. This study reports the effect of stitching on the mechanical properties of MWK composites, and the feasibility processing of the thick U-beam structure utilizing the stitched preforms. Permeability of the preform, viscosity and cure property of the epoxy resin have been measured. The results of resin flow analysis has been used in determining the gate/vent locations of the RTM mold. Cross-sectional observation of the channel beam prototype demonstrated that the resin impregnation was almost complete, except for some surrounding area of stitched yarns.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.120-125
• /
• 2000

A heddle frame is the major part of a loom that produces woven cloth by insertion of weft yarns between warp yams. Warp yarns are manipulated by many heddles fixed in a heddle frame. Recently, the up and down speed of heddle frames has been increased much for the increase of productivity, which induces higher inertial stresses and vibrations in the heddle frame. The heddle frame has the rectangular cross-section. For the design of box type beams of rectangular cross-section, extensional stiffness EA, flexural stiffness El, and torsional stiffness GJ as well as the vibration characteristics are important and should be simultaneously considered. Tn this paper, the vibration characteristics of the composite and the composite sandwich beams for high-speed heddle frame were tested by impulse frequency response.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1002-1007
• /
• 2008

The floor structure of railway vehicle can deflect and warp due to variation of temperature and humidity at the inside and outside of vehicle. In this study, its temperature and humidity characteristics was investigated experimentally for beam and plate specimen and numerically for the floor structure assembly. The temperature and humidity characteristics of a part were measured and the deformation and stress distribution of the floor structure were calculated using a commercial software. And the warp deformation of the plywood was measured experimentally. The results show that the temperature and humidity effects on the floor structure are the important factor to decide the strength and the quality of the floor structure of railway vehicles.

• Structural Engineering and Mechanics
• /
• 제72권2호
• /
• pp.257-273
• /
• 2019

In this paper, the mechanical behaviour of functionally graded material beams is studied using the 3D Saint-Venant's theory, in which the section is free to warp in and out of its plane (Poisson's effects and out-of-plane warpings). The material properties of the FGM beam are distributed continuously through the thickness by several distributions, such as power-law distribution, exponential distribution, Mori-Tanaka schema and sigmoid distribution. The proposed method has been applied to study a simply supported FGM beam. The numerical results obtained are compared to other models in the literature, which show a high performance of the 3D exact theory used to describe the stress and strain fields in FGM beams.

• 한국염색가공학회지
• /
• 제21권3호
• /
• pp.26-36
• /
• 2009

The objective of this study is to investigate the elution characteristics of the partial dispositioned hollow nylon filament and the mechanical properties of the eluted fabrics according to the weight reduction conditions. For this purpose, the partial dispositioned nylon/PET composite filament, SDY 70d/48f was prepared, and warp beam was also prepared on the sizing machine using these yarns. Four kinds of woven fabrics were designed with different warp and weft densities and these fabrics specimens were eluted with weight reduction conditions of two kinds of NaOH concentration (30, 40g/l), three kinds of weight reduction temperature (50, 60, $85^{\circ}C$) and two kinds of weight reduction time (30, 60min). The eluting rates of these fabrics specimens were analysed with various weight reduction conditions. The eluting characteristics of these fabrics were discussed with the cross-section of nylon hollow filament measures by SEM. Finally, the mechanical properties of the partial dispositioned hollow nylon fabrics were measured and discussed with various weight reduction conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1141-1145
• /
• 2005

This paper proposes a robust tension control algorithm for the let-off and take-up system driven by servo motor which is robust to disturbance and tension variation by using SVR(Support Vector Regression). Quality of textile goods in fiber manufacturing process highly depends on control of let-off, take-up and tension which are essential for constant tension control of yarn and textile fabrics and correct length of them. The physical properties of textile fabrics are very sensitive to several factors(temperature, humidity, radius change of warp beam etc.) which result in tension change. Rapid development of fiber manufacture machine for higher productivity requires control system for let-off, take-up and tension for robustness to sharp tension-variation and quick response. The validity and the usefulness of the proposed algorithm are thoroughly verified through numerical simulation.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2371-2380
• /
• 2000

In this paper, we developed the proximity exposure system with the vertical structure of glass and mask stage to minimize the mask's warp caused by the pull of gravity. This system, which canirradiate the ultra violet through 1440 H 850 $\textrm{mm}^2$ and 1330X 1015 $\textrm{mm}^2$ exposure area, has the followingcharacteristics. The glass stage can be inclined by 80 degrees at vertical structure to load substrate withsafety on it. When the glass stage is the vertical state, the gap control, alignment control and exposureof ultra violet are executed. So, it enhances the pattern uniformity by minimizing the mask's warp. Theglass stage can also control the gap between the mask and the substrate by the coarse and fine motioncontrol. The mask stage can adjust the posture of photomask to the position of substrate by imageprecessing method. The galss stage for the gap control and the mask stage for the alignment aredesigned independently for each function.

• 수산해양기술연구
• /
• 제40권4호
• /
• pp.311-318
• /
• 2004

실해상 실험을 통하여 해상의 조건이 동일할 때, 예망과 항해중일 때의 만남파에 대한 소형 트롤어선의 종동요와 횡동요의 응답특성을 통계적 방법과 이론적인 방법을 이용하여 분석하였다. 그 결과를 요약하면 다음과 같다. (1) 종동요의 응답 크기를 예망중과 항해중에 따라 비교하면 큰 차이가 없으나, 선수쪽에서 파를 받을 경우에는 항해중의 응답이 예망중 보다 양각 커지는 경향이 있다. (2) 횡동요의 응답은 예망중과 항해중 모두 종동요에 비해 매우 크다. 그러한 경향은 모든파향에서 현저하지만, 횡파를 받을 경우에는 양자의 응답 차이는 줄어든다. (3) 예망중과 항해중 모두 종동요에서 응답스펙트럼의 peak가 나타나는 주기는 파향에 관계없이 거의 일정하다. (4) 선미쪽에서 파를 받고 예망할 때, 양현에 균등하게 warp의 힘이 작용한다면, 어구의 저항은 동요를 감쇄시키는 상당한 효과가 있다.

• Structural Engineering and Mechanics
• /
• 제31권2호
• /
• pp.137-152
• /
• 2009

Mechanic behavior of Y-shape thin-walled box girder bridge structure is complex, so one can not exactly hold the mechanical behavior of the Y-shape thin-walled box girder bridge structure through general calculation theory and analytical method. To hold the mechanical behavior better, based on elementary beam theory, by increasing the degree of freedom analytical method, taking account of restrained torsiondistortion angledistortion warp and shearing lag effect at the same time, authors obtain a thin-walled box beam analytical element of 10 degrees of freedom of every node, derive stiffness matrix of the element, and code a finite element procedure. In addition, authors combine the obtained procedure with spatial grillage analytical method, meanwhile, they build a new analytical method that is the spatial thin-walled box girder element grillage analysis method. In order to validate the precision of the obtained analysis method, authors analyze a type Y-shape thin-walled box girder bridge structure according to the elementary beam theory analytical method, the shell theory analytical method and the spatial thin-walled box girder element grillage analysis method respectively. At last, authors test a type Y-shape thin-walled box girder bridge structure. Comparisons of the results of theory analysis with the experimental text show that the spatial thin-walled box girder element grillage analysis method is simple and exact. The research results are helpful for the knowledge of the mechanics property of these Y-shape thin-walled box girder bridge structures.