• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.199-200
• /
• 2006

PM recent developments focus on increasing this technology's competitiveness when compared to wrought materials. Warm compaction allows the replacement of a double press double sinter process with a single warm press and sintering step, thus allowing cost and time savings. Moreover there are added benefits to consider such as reducing work in process and lessening part's logistics cost. This paper presents a successful industrial trial to replace a double press-double sinter process with a warm die compaction and sintering process. The part chosen was a high performance gear containing 0,9% wt. carbon. Sintering was conducted in a belt furnace at $1120^{\circ}C$ in a nitrogen rich atmosphere with rapid cooling process in order to obtain a quasi fully martensitic structure with a minimum of 700HV0,1 and 450HV10 after annealing. The balance between properties and cost is favoured by the use of a singular lubricant developed in a Eureka frame project together with POMETON S.A. and die warm compaction. Warm compaction is only needed to be effective on the gear teeth, in order to achieve the required properties. Therefore only the die is actually heated. This simplified system avoids flow rate problems typically involved when using more elaborate warm compaction equipments.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.130-136
• /
• 2021

The purpose of this study was to investigate the effect of the intensity of warm-up exercise on the physiological response and exercise performance during resistance exercise. For this purpose, 8 male college students with at least 1 year of experience in resistance movement were selected. The warm-up condition was set to NON condition (preparatory exercise not performed), 3 set condition, 6 set condition, and 9 set condition, and the intensity was different for each set. After warm-up, 75% 1RM of main exercise was performed, and blood pressure and heart rate were measured immediately after exercise to measure RPP. The number of repetitions and total work for each condition were measured as the number of repetitions and momentum during the main exercise. The measured data were analyzed by repeated measures two-way ANOVA. As a result, although there was no difference in Rate Pressure Product according to the warm-up conditions, the number of repetitions and total amount of exercise showed the highest in the 3-set condition. Therefore, it is thought that the number and intensity of warm-up exercises should be set appropriately during resistance exercise, and warm-up of 3 sets or more during resistance exercise is thought to decrease exercise performance.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.16 no.2
• /
• pp.163-187
• /
• 2010

The concept of latent-gi(伏氣) was first mentioned in Yellow Emperor's Canon of Internal Medicine. For example, Elementary Questions states, "Damage by cold in winter necessarily engenders warm disease in the spring." Zhang Zhong-Jing of Han Dynasty in On Cold Damage and Miscellaneous Diseases mentions warm disease, stating, for example, "Greater yang disease with heat effusion and cough and without aversion to cold is warm disease. If sweating is applied, and there is generalized heat, this is wind warmth." However, the concept of warm disease was not central to his systematic presentation of externally contracted disease which placed the emphasis on wind and cold as the major causes of these diseases. Zhang Zhong-Jing's theories centuries after in the Sung Dynasty were to become the focus of the cold damage school, whereas the concept of warm disease was to become the focus of a rival school, the warm disease school. In the Sui-Tang Period, The Origin and Indications of Disease mentions warm diseases, their causes, patterns, and major principles of treatment. Successive generations of doctors wrote about warm disease, and in the Ming Dynasty writings on the subject become more prolific. This development is attributable on the one hand to the opening up of the south of China where febrile diseases tended to be of a different nature than in the north, and on the other to pestilences arising as a result of wars. In this period, Wu You-Xing in On Warm Epidemics explained in detail the laws governing the origin, development and pattern identification of warm epidemics. Notably, he posed the etiological notion of a contagious perverse gi.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.3
• /
• pp.357-362
• /
• 1994

Five adult sheep were exposed to intermittent cold for 12 h (18:00-06:00) at an air temperature of $5{\pm}1^{\circ}C$ followed by 12 h (06:00-18:00) at $25{\pm}2^{\circ}C$ over a period of 8 days continuously. Carotid artery blood (Tc), mean skin (Ts) and mean body (Tb = 0.86 Tc + 0.14 Ts) temperatures, heat production rate (HP), respiratory evaporative heat loss, respiration rate (RR) and volume were measured before and after exposure. Tc during the 12 h cold period of intermittent cold exposure was similar to that during the corresponding period in the warm environment, while Tc in the $25^{\circ}C$ of intermittent cold was higher (p < 0.05) than that in the corresponding period in the warm environment. Ts during the cold period markedly decreased (p < 0.001) by about $9^{\circ}C$ when compared with that in the corresponding time period in the warm environment, while Ts during the $25^{\circ}C$ period of intermittent cold recovered to a similar level to that in the warm environment. Tb was lower (p < 0.001) during the cold period of intermittent cold, whereas a slight increase in Tb during the $25^{\circ}C$ period of intermittent cold was significant (p < 0.05) when compared with the value during the similar period in the warm environment. HP was greatly increased (p < 0.001) by cold exposure, followed by an immediate decrease during the first one hour of the 12 h warm period, reaching a similar level to that in the warm environment. A lower (p < 0.05) RR was observed during both the cold and $25^{\circ}C$ period of intermittent cold than during the corresponding periods in the warm environment. The results of the present investigation clearly show that the body temperature of sheep increased during a 12 h warm period following 12 h of exposure to cold. These results suggest that during a warm period of an intermittent cold exposure cycle, heat could be shored in the animal body.

• Korean Journal of Acupuncture
• /
• v.26 no.2
• /
• pp.75-89
• /
• 2009

Objectives: Warm needling combines simultaneously the effects of acupuncture and moxibustion. This study was to investigate whether warm needling could relieve acute knee arthritis induced by carrageenan in rats. Methods: To illuminate the underlying mechanisms of the warm needling-induced antinociception, weight bearing force (WBF) was observed on the acute knee arthritic rat model. Under general anesthesia, ST36, SP9, Hakjung extra point, LI4 were punctured and stimulated with 30 mg moxa ball combustion on top of the needle (${\emptyset}0.18{\times}8mm$). Results: In behavioral test, rats subsequently showed a reduced stepping force of the affected limb 3 hours after the induction of arthritis. Warm needling on the contralateral or ipsilateral ST36 failed to show antinociceptive effect on the acute knee arthritis. Warm needling on the contralateral SP9 or LI4 increased WBF values to normal level in the acute stage of the arthritis. Warm needling on the Hakjung extra-point resulted in the significant antinociceptive effects through acute stage. These effects of warm needling were suppressed by opioids receptor antagonist naltrexone (10 mg/kg, i.p.) and alpha adrenoceptor antagonist phentolamine (5 mg/kg, i.p.). Conclusion: The data suggest that warm needling-induced antinociception is differently mediated by acupoints and accomplished by activating the descending inhibitory systems including endogenous opioids and $\alpha$-adrenoceptors.

• 한국해양학회지
• /
• v.29 no.2
• /
• pp.152-163
• /
• 1994

The characteristics and fluctuations of structures and spatial distributions of warm eddies (anticyclonic eddies) in the southwestern part of the East Sea (the Japan Sea) are discussed based on the data gathered y the Fisheries Research and Development Agency, Korea from 1967 to 1968. The warm eddies existed very often in the southwest of the Ullung Island. The warm eddies are elliptical in shape and the mean size is about 130 km in diameter. Bimonthly distributions of warm eddies, the largest value of observed frequency and diameter in August and the least in June, indicate that the generation of the warm eddy is related with the development of the East Korean Warm Current. The warm eddies move west, north or southward with 0.80∼2.50 cm/sec or stay over a few months at the same place southwest of the Ullung Island. Movement of warm eddies may be influenced by the neighboring currents, the Rossby wave and the topography. The relationship between the position of warm eddies and the bottom topography suggests that the development and the movement of warm eddies are controlled by the Ullung Basin. The warm eddies should be divided into two groups. One group is the shallow warm eddy with strong baroclinic characteristics and the other is the deep one with strong Barotropic characteristics. The shallow group seems to be closely related with positive values (in summer) of the sea level difference between Pusan and Mozi (the Tsushima Current), while the deep group has no relation with that.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.1
• /
• pp.58-64
• /
• 1992

A barotropic model is run over the Northwest Pacific Ocean to examine the formation and transport of the Tsushima Warm Current. The results indicate that the Tsushima Warm Current is a downstream extension of the Taiwan Warm Current. Local wind does not change the amount of transport of Tsushima Warm Current but it changes much the initial flow pattern of Tsushima Warm Current such that for southerly wind, the transport is through the Taiwan Strait but for northerly wind, it is through the eastern side of Taiwan.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.507-512
• /
• 2003

A finite element analysis for near-net-shape forming of Al6061 powder was performed under warm pressing. The advantages of warm compaction by rubber isostatic pressing were discussed to obtain parts with better density distributions. To simulate densification and deformed shape of a powder compact during warm pressing, the elastoplastic constitutive equation based on yield function of Shima-Oyane was implemented into a finite element program(ABAQUS). The hyperelastic constitutive equation based on the Ogden strain energy potential was employed to analyze nonlinear elastic response of rubber. Finite element results were compared with experimental data for Al6061 powder compacts under warm pressing.

• Journal of the korean society of oceanography
• /
• v.37 no.1
• /
• pp.20-26
• /
• 2002

The offshore extension of the East Korean Warm Current (EKWC) mostly turns anti-cyclonically around the Ulleung Warm Eddy (UWE). This fact needs to be dynamically explained because a rectilinear stream past a circular cylinder is normally expected to have a flow pattern symmetric about the stream axis. For this purpose, a simple analytical model is presented in this paper. This model shows that the EKWC's tendency to be anti-cyclonic around the UWE is due to the anti cyclonic circulation generated around the UWE. This tendency results from the geostrophic adjustment between the UWE and the ambient EKWC water. As the strength of the UWE decreases, relative to the EKWC, this model shows that the flow pattern gradually changes from circular to rectilinear.

• Transactions of Materials Processing
• /
• v.17 no.2
• /
• pp.102-106
• /
• 2008

Cryogenic rolling combined with warm rolling has been found more effective than a single cryogenic rolling process in improving the strength of a 5052 Al alloy. In this study, cryo-rolled 5052 Al alloys were warm-rolled at $175^{\circ}C$. A notable increase of tensile strength was achieved by the precipitation during warm rolling process. Mechanical behavior of this alloy was investigated using hardness and tensile tests. It was found that the cryogenic rolling process combined with warm rolling process was very effective in improving tensile strength.