• Title/Summary/Keyword: walnut

Search Result 165, Processing Time 0.028 seconds

Preparation and Characteristics of Ice Cream from Mix Added with Nutmeats (견과육 첨가 아이스크림의 제조 및 특성)

  • Kim, Jong Woo
    • Korean Journal of Agricultural Science
    • /
    • v.25 no.2
    • /
    • pp.176-180
    • /
    • 1998
  • Ice cream were made with chestnut meat and walnut meat which are special agricultural products in Chungnam area. The nut meat powders were added in the concentration of 1~5% in the ice cream mix. The over run characteristic, chemical composition and sensory test were examined. The results obtained were as follows. 1. The score of over run was lower for chestnut ice cream(35.75~38.81%) and walnut ice cream (36.31~40.38%) than for control ice cream (41.28%). 2. The concentration of solid-non-fat and crude protein were higher for chestnut ice cream 31.05~31.73% and 4.48~4.78% than for control ice cream. The walnut ice cream contained more fat and protein (12.21~16.29% and 4.63~5.27%) than for control ice cream did. 3. The scores of tastes and odor were higher for chestnut ice cream than for control ice cream, and the scores of odor were higher significantly (P<0.05%) for walnut ice cream.

  • PDF

Evaluation of Plant Performance during Biomass Co-firing in Pulverized Coal Power Plant (미분탄화력발전에서의 바이오매스 혼소 시 플랜트 성능특성 평가)

  • Mun, Tae-Young;Tefera, Zelalem Tumsa;Lee, Uendo;Lee, Jeung Woo;Yang, Won
    • Journal of the Korean Society of Combustion
    • /
    • v.19 no.3
    • /
    • pp.8-17
    • /
    • 2014
  • The aims of this research were to evaluate effects of biomass co-firing to pulverized coal power plants and the variation of co-firing ratios on the plant efficiency related to power consumption of auxiliary system and flue gas characteristics such as production and component by process simulation based on the existing pulverized coal power plant. In this study, four kinds of biomass are selected as renewable fuel candidates for co-firing: wood pellet(WP), palm kernel shell(PKS), empty fruit bunch(EFB) and walnut shell(WS). Process simulation for various biomass fuels and co-firing ratios was performed using a commercial software. Gas side including combustion system and flue gas treatment system was considering with combination of water and steam side which contains turbines, condenser, feed water heaters and pumps. As a result, walnut shell might be the most suitable as co-firing fuel among four biomass since when 10% of walnut shell was co-fired with 90% of coal on thermal basis, flue gas production and power consumption of auxiliary systems were the smallest than those of other biomass co-firing while net plant efficiency was relatively higher than those of other biomass co-firing. However, with increasing walnut shell co-firing ratios, boiler efficiency and net plant efficiency were expected to decrease rather than coal combustion without biomass co-firing.

Studies on the Factors Affecting Quality and Textural Characteristics of Artificial Gluten Meat Part II: Effects of amount of ingredients on properties of AGM (Walnut, Oils, Salt, Onion) (글루텐 인조육의 품질특성에 영향을 주는 요인과 물성에 관한 연구 2보 : 각 요인이 품질 특성에 미치는 영향 (호두, 식용유, 소금, 양파))

  • 박춘란;김기숙;장주익
    • Korean journal of food and cookery science
    • /
    • v.4 no.2
    • /
    • pp.11-19
    • /
    • 1988
  • These experiments were carried out to study the factors affecting quality and textural characteristics in the preparation of artificial gluten meat (AGM). These results were compared with the raw beef on its properties. Effects of amounts of ingredients on properties of AGM were summarized as follows: 1. On effects of amounts of ingredients, walnut was one of the most factors on the color in AGM The more increased the amounts of walnut, the more decreased hardness, cohesiveness, chewiness, and the more increased springiness and water holding capacity. Therefore, the 30% of walnut added sample became similar to raw beef. 2. The kinds and amounts of oil and mixing methods did not affect on color, shear force, and chewiness, but did on cohesiveness significantly 3. The more increased the salt levels, the better were the hardness and chewiness, but shear force and water holding capacity were not affected. 2% of salt added sample approached to raw beef in hardness, springiness, cohesiveness and chewiness. 4. The more onion levels increased, the more hardness and chewiness decreased.

  • PDF

Physiological Study of the Extract of Junglans nigra Shells for the Cosmeceutical Application (코스메슈티컬 적용을 위한 흑호두 과피의 생리학적 연구)

  • Lee, Hyun Ju;Ohk, Seung-Ho
    • Journal of the Korean Applied Science and Technology
    • /
    • v.38 no.1
    • /
    • pp.29-36
    • /
    • 2021
  • Among natural products, the shells of black walnut(Juglans nigra), which are not used commercially and mostly discarded, were examined to investigate the physiological activity and the efficacy for the cosmetic application. DPPH radical scavenging activity of hot water extract of black walnut shells was 76.06% at 300 ㎍/mL. ABTS radical scavenging activity of the extract was 61% at 1000 ㎍/mL, showing excellent antioxidant activity. When the black walnut shell extract was applied to HaCaT cells, a skin keratinocyte, the viability of the cells was 92.6% at 250 ㎍/mL, showing a remarkably low effect on cell viability. At the concentration of 500 ㎍/mL, 67.35% of nitric oxide(NO) production was inhibited. It also showed an inhibitory effect on Hyaluronidase 31 times higher than that of Vitamin C at 100 ㎍/mL concentration. In conclusion, the black walnut shell extract showed high potentials for the cosmeceutical applications, suggesting the possibility of using it as a high value-added natural material in various industries such as food, fragrance, healthcare, and pharmaceuticals.

Genomic Analysis of 13 Putative Active Prophages Located in the Genomes of Walnut Blight Pathogen Xanthomonas arboricola pv. juglandis

  • Cao, Zheng;Cuiying, Du;Benzhong, Fu
    • Microbiology and Biotechnology Letters
    • /
    • v.50 no.4
    • /
    • pp.563-573
    • /
    • 2022
  • Xanthomonas arboricola pv. juglandis (Xaj) is a globally important bacterial pathogen of walnut trees that causes substantial economic losses in commercial walnut production. Although prophages are common in bacterial plant pathogens and play important roles in bacterial diversity and pathogenicity, there has been limited investigation into the distribution and function of prophages in Xaj. In this study, we identified and characterized 13 predicted prophages from the genomes of 12 Xaj isolates from around the globe. These prophages ranged in length from 11.8 kb to 51.9 kb, with between 11-75 genes and 57.82-64.15% GC content. The closest relatives of these prophages belong to the Myoviridae and Siphoviridae families of the Caudovirales order. The phylogenetic analysis allowed the classification of the prophages into five groups. The gene constitution of these predicted prophages was revealed via Roary analysis. Amongst 126 total protein groups, the most prevalent group was only present in nine prophages, and 22 protein groups were present in only one prophage (singletons). Also, bioinformatic analysis of the 13 identified prophages revealed the presence of 431 genes with an average length of 389.7 bp. Prokka annotation of these prophages identified 466 hypothetical proteins, 24 proteins with known function, and six tRNA genes. The proteins with known function mainly comprised prophage integrase IntA, replicative DNA helicase, tyrosine recombinase XerC, and IS3 family transposase. There was no detectable insertion site specificity for these prophages in the Xaj genomes. The identified Xaj prophage genes, particularly those of unknown function, merit future investigation.

Antioxidant Activity of Extract from Walnut Uuglans sinensis Dode) and Its Protective Effect on Cell Injury and Lipid Peroxidation in Renal Cortical Slices (호두 추출물의 항산화 활성과 신피질에서 세포 손상과 지질과산화 방지효과)

  • Bae Kae Sun;Hwang Eul Chul;Kwon Chae Hwa;Kim Soon Hee;Choi Chun Whan
    • Journal of Life Science
    • /
    • v.15 no.1 s.68
    • /
    • pp.106-111
    • /
    • 2005
  • To investigate the antioxidant activity of extract from the raw walnut, Juglans sinensis Dode, we prepared five fractions (methanol (MeOH), dichloromethane $(CH_2Cl_2)$, ethyl acetate (EtOAc), n-buthanol (n-BuOH) and dehydrogen monooxide $(H_2O)$ fractions) and examined. The effect of walnut extract on the oxidative stress was investigated in vitro. The DPPH (2,2-Di (4-tert-octylphenyl)-1-picrylhydrazyl) free radical scavenging activity of extract from raw walnut was shown in the following order: $EtOAc\;fraction layer. The result showed that the highest activity $(0.56{\mu}g/ml,\;IC_{50}.)$ was observed in EtOAc fraction, whereas n-BuOH fraction, MeOH fraction, $CH_2O_2$ fraction and $H_2O$ layer of $IC_{50}$ were $2.34{\mu}g//ml,\;3.88{\mu}g/ml,\;8.06{\mu}g/ml,\;and\;8.19{\mu}g/ml$, respectively. The radical scavenging activity assay of each fraction showed that the antioxidative activity was observed in the following order: EtOAc fraction $(74.27\pm1.56\%)>MeOH\;fraction\;(60.76\pm3.4\%)>n-BuOH\;fraction\;(59.32\pm0.88\%)>H_2O\;layer\;(41.69\pm2.06\%)$. These results revealed that all fractions, except for $CH_2Cl_2$ fraction, showed high antioxidative activity. Furthermore, the peroxynitrite $(ONOO^-)$ scavenging activity was assayed in each fraction. The result showed that the $ONOO^-$ scavenging activity of EtOAc fraction, MeOH fraction and n-BuOH fraction from raw walnut was $95.14\pm0.36\%,\; 90.02\pm1.19\%\;and\;89.41\pm0.81\%$, respectively. The tert-butylhydroperoxide (t-BHP) treatment in vitro increased lactate dehydrogenase release and lipid peroxidation in renal cortical slices. Such changes were completely prevented by addition of MeOH fraction, EtOAc fraction and n-BuOH fraction of walnut. These results indicate that the walnut extract exerts the benedicial effect against t-BHP-induced cell injury and its effect may be due to antioxidant action. In addition, it is suggested that walnut extract might be developed as the effective scavenger for the prevention of oxidative stress.

Capacity of Activated Carbon Derived from Agricultural Waste in the Removal of Reactive Dyes from Aqueous Solutions

  • Manoochehri, Mahboobeh;Rattan, V.K.;Khorsand, Ameneh;Panahi, Homayon Ahmad
    • Carbon letters
    • /
    • v.11 no.3
    • /
    • pp.169-175
    • /
    • 2010
  • The study describes the results of batch experiments on the removal of Reactive Yellow 15 (RY15) and Reactive Black 5 (RB5) from synthetic textile wastewater onto Activated Carbon from Walnut shell (ACW). The experimental data were analyzed by the Langmuir, Freundlish, Temkin and Dubinin-Radushkevich (D-R) models of adsorption. The experiments were carried out as function of initial concentrations, pH, temperature (303-333), adsorbent dose and kinetics. The surface area and pore volumes of adsorbent were measured by BET and BJH methods. The findings confirm the surface area (BET) is 248.99 $m^2/g$. The data fitted well with the Temkin and D-R isotherms for RY15 and RB5, respectively. The most favorable adsorption occurred in acidic pH. Pseudo-second order kinetic model were best in agreement with adsorption of RY15 and RB5 on ACW. The results indicate that walnut shell could be an alternative to more costly adsorbent currently being used for dyes removal.

Role of Activated Carbon Modified by H3PO4 and K2CO3 From Natural Adsorbent for Removal of Pb (II) From Aqueous Solutions

  • Manoochehri, Mahboobeh;Khorsand, Ameneh;Hashemi, Elham
    • Carbon letters
    • /
    • v.13 no.3
    • /
    • pp.167-172
    • /
    • 2012
  • Most heavy metals are well-known toxic and carcinogenic agents and when discharged into wastewater represent a serious threat to the human population and the fauna and flora of the receiving water bodies. The present study aims to develop a procedure for Pb (II) removal. This procedure is based on using powdered activated carbon, which was prepared from walnut shells that were generated as plant wastes and modified with potassium carbonate and phosphoric acid as chemical agents. The main parameters, such as effect of pH, effect of sorbent dosage, Pb (II) concentrations, and various contact times influence the sorption process. The experimental results were analyzed by using Langmuir, Freundlich, Tempkin, and Dubinin-Radushkevich adsorption models. The kinetic study of Pb (II) on activated carbon from walnut shells was performed based on pseudo- first order and pseudo- second order equations. The data indicate that the adsorption kinetics follow the pseudo- second order rate. The procedure was successfully applied for Pb (II) removal from aqueous solutions.

Role of modified activated carbon by H3PO4 or K2CO3 from natural adsorbent for removal of Pb(II) from aqueous solutions

  • Manoochehri, Mahboobeh;Khorsand, Ameneh;Hashemi, Elham
    • Carbon letters
    • /
    • v.13 no.2
    • /
    • pp.115-120
    • /
    • 2012
  • Most heavy metals are well-known toxic and carcinogenic agents and when discharged into wastewater represent a serious threat to the human population and the fauna and flora of the receiving water bodies. The present study aims to develop a procedure for Pb(II) removal. The study was based on using powdered activated carbon, which was prepared from walnut shells generated as plant wastes and modified with potassium carbonate or phosphoric acid as chemical agents. The main parameters, such as effect of pH, effect of sorbent dosage, Pb(II) concentrations, and various contact times influence the sorption process. The experimental results were analyzed by using Langmuir, Freundlich, Tempkin and Dubinin-Radushkevich adsorption models. The kinetic study of Pb(II) on activated carbon from walnut shells was performed based on pseudo-first order and pseudo-second order equations. The data indicate that the adsorption kinetics follow the pseudo-second order rate. The procedure was successfully applied for Pb(II) removal from aqueous solutions.

The Color Painting on Yellow Poplar (Liriodendron tulipifera L.) Board for Using Furniture Materials (가구재 이용을 위한 백합나무 판재의 도장방법)

  • Park, Sang Bum;Lee, Min
    • Journal of the Korea Furniture Society
    • /
    • v.24 no.4
    • /
    • pp.345-349
    • /
    • 2013
  • Yellow poplar is well known commercial hardwood species in the world because of its availability, rapid growth, large size, excellent form, early natural pruning, and the good working quality of the wood. Therefore, yellow poplar (Liriodendron tulipifera L.) has been adopted in South Korea for decades ago, and its cultivating the saplings and silvicultural system have been studied. However, yellow poplar is still embroiled in controversy for utilization of use and worth. This species has not only advantages such as lower weight, light color, and higher machinability and bending processing, but also has disadvantages which are bad smell and different colors on heartwood and sapwood. In this study, the objective was that use of yellow poplar board as furniture materials by drying and painting process. Thirty years old yellow poplar was cut and dried for 7 days by high-frequency dryness. Adjustment of color tone to walnut color was conducted with multiple colorants and various number of spread times. Uniform color of yellow poplar on heartwood and sapwood was accomplished by applying 1 time stain (green), 2 times transparent primer, 1 time middle-painting (walnut), and 2 times top-painting (walnut) in sequentially. The painted yellow poplar board was used to manufacture table and dressing table. During the furniture manufacture process, no critical issues were occurred on part of jointing and painting. This painting method may be useful data for future use of yellow poplar as furniture materials.

  • PDF